Boilers - Import export

ELECTRIC BOILER

Steam boilers require substantial energy to heat feed water to boiling point, convert it to steam, and potentially superheat it. Improving heat transfer efficiency involves utilizing high temperatures near combustion sources for boiling and superheating, while residual heat from cooled combustion gases is used via an economizer to raise the temperature of feed water entering the steam drum.

The construction of a boiler involves a diverse range of materials and components, broadly categorized into boiler steels, structural steels, and bought-outs (BOs). These materials are chosen based on factors like weldability, strength, and compliance with safety standards to ensure integrity and reliability.

A pressure vessel is defined as a container with a pressure differential between inside and outside. The inside pressure is usually higher than the outside, except for some isolated situations. The fluid inside the vessel may undergo a change in state as in the case of steam boilers, or may combine with other reagents as in the case of a chemical reactor. Pressure vessels often have a combination of high pressures together with high temperatures, and in some cases flammable fluids or highly radioactive materials. Pressure vessels are used in a number of industries; for example, the power generation industry for fossil and nuclear power, the petrochemical industry for storing and processing crude petroleum oil in tank farms as well as storing gasoline in service stations, and the chemical industry (in chemical reactors) to name but a few.

DETAILS General Features: Stainless hot water tank made for THY . Technical Specifications: Areas of Use:

— For recovering heat from flash steam from thermal water treatment — Heat recovery and thus efficiency improvement — Energy produced can be used for additional heating or for transfer to a separate water circuit Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are achieved.

The right choice for your application(s). We not only distinguish ourselves by high-quality products, but we are involved. We are on site during all phases of delivery and installation to ensure that everything runs smoothly and according to your wishes. CERTUSS steam generators are of high quality and generate boiler efficiencies of up to 98%. They have been developed from innovative standards, according to PED guidelines, i.e. the latest applicable regulations. And as required, the steam boilers are TUV-approved and provided with a CE certificate, which means that our product complies with the applicable

Choquenet offers the latest generation of carbonator boilers with richter tube technology. A traditional boiler must have a pumping system to allow the recycling of the gas and limed juice (at least 15 times the incoming flow) in order to obtain a homogeneous mixture. The Choquenet technology, on the other hand, makes it possible to obtain a homogeneous carbonated juice without a pumping system, but by simply injecting the CO2 internally via the richter tubes. In addition, the permanent cleaning system of the gas injection part avoids the recurrent opening of the boilers and thus limits production stoppages. Our technology allows a gain in productivity, a more homogeneous mixture for a better filterability, a lower consumption of reagents and thus to reduce the operating and maintenance costs.

Corrosion resistant, light Aluminium heat exchanger Efficiency upto %107 Six different capacities for Ongas 300 (70, 95,115,125,155,190 kW) Eight different capacities for Ongas 600 (220,305,380,455,530,605,680,850 kW) Cascade system with 16 boilers

As a very strong stockist in Turkey, our company offers all kinds of mechanical engineering & plumbing spare parts used in HVAC industry, with wide range of types, sizes to our domestic and worldwide customers, at very competitive prices and with fast delivery options directly from our large stock for export. Your very small orders are also welcome. Please contact us now to get fast reply. We offer a complete package, wide range of HVAC products directly from our huge stock in Turkey for export: Boilers (wall-hung domestic type boilers / industrial type gas boilers), panel radiators, towel warmers, electrical/gas water heaters (instantaneous water heaters, storage tank water heaters), air-conditioners, natural gas space heaters, gas heater fans, spare parts of boilers, plumbing equipment, plastic materials (plastic pipes, fittings), industrial boilers, expansion tanks, valve groups, heat exchangers, pump groups (circulation pumps, centrifuge pumps, dreinage pumps, heat pumps)

As a very strong stockist in Turkey, our company offers wall-hung gas boilers (wall-mounted boilers) with wide range of brands, models, types, and sizes to our domestic and worldwide customers, at very competitive prices and with fast delivery options directly from our large stock for export. Your very small orders are also welcome. Please contact us now to get fast reply. We offer a complete package, wide range of HVAC products directly from our huge stock in Turkey for export: Boilers (wall-hung domestic type boilers / industrial type gas boilers), panel radiators, towel warmers, electrical/gas water heaters (instantaneous water heaters, storage tank water heaters), air-conditioners, natural gas space heaters, gas heater fans, spare parts of boilers, plumbing equipment, plastic materials (plastic pipes and fittings), industrial boilers, expansion tanks, valve groups, heat exchangers, pump groups (circulation pumps, centrifuge pumps, dreinage pumps...), heat pumps...

ЕСОPAR 10 bar steam boilers are designed for generating saturated steam with a temperature up to 185 °С. Their steamgenerating capacity varies from 0,1 to 10 tons per hour at a steam pressure to 1,0 MPa. The boilers can be used to obtain steam for technological purposes of enterprises, as well as generation of heat energy for the heating systems of residential, public, and manufacturing buildings. The steam boiler with flame inversion consists of a cylindrical furnace with wetted bottom, where flame forms and combustion products are being inverted. Flue gases enter the tube pack of the front tube plate and are sent toward the back tube plate, which they leave through the flue connection. The boiler design ensures low heating and surface loads in the combustion chamber. The boiler body consists of shell, furnace, boiler bottom and flat tube plates made of highquality steel.

ЕСОPAR 10 bar steam boilers are designed for generating saturated steam with a temperature up to 185 °С. Their steamgenerating capacity varies from 0,1 to 10 tons per hour at a steam pressure to 1,0 MPa. The boilers can be used to obtain steam for technological purposes of enterprises, as well as generation of heat energy for the heating systems of residential, public, and manufacturing buildings. The steam boiler with flame inversion consists of a cylindrical furnace with wetted bottom, where flame forms and combustion products are being inverted. Flue gases enter the tube pack of the front tube plate and are sent toward the back tube plate, which they leave through the flue connection. The boiler design ensures low heating and surface loads in the combustion chamber. The boiler body consists of shell, furnace, boiler bottom and flat tube plates made of highquality steel.

ЕСОPAR 10 bar steam boilers are designed for generating saturated steam with a temperature up to 185 °С. Their steamgenerating capacity varies from 0,1 to 10 tons per hour at a steam pressure to 1,0 MPa. The boilers can be used to obtain steam for technological purposes of enterprises, as well as generation of heat energy for the heating systems of residential, public, and manufacturing buildings. The steam boiler with flame inversion consists of a cylindrical furnace with wetted bottom, where flame forms and combustion products are being inverted. Flue gases enter the tube pack of the front tube plate and are sent toward the back tube plate, which they leave through the flue connection. The boiler design ensures low heating and surface loads in the combustion chamber. The boiler body consists of shell, furnace, boiler bottom and flat tube plates made of highquality steel.

ЕСОPAR 10 bar steam boilers are designed for generating saturated steam with a temperature up to 185 °С. Their steamgenerating capacity varies from 0,1 to 10 tons per hour at a steam pressure to 1,0 MPa. The boilers can be used to obtain steam for technological purposes of enterprises, as well as generation of heat energy for the heating systems of residential, public, and manufacturing buildings. The steam boiler with flame inversion consists of a cylindrical furnace with wetted bottom, where flame forms and combustion products are being inverted. Flue gases enter the tube pack of the front tube plate and are sent toward the back tube plate, which they leave through the flue connection. The boiler design ensures low heating and surface loads in the combustion chamber. The boiler body consists of shell, furnace, boiler bottom and flat tube plates made of highquality steel.

ЕСОPAR 10 bar steam boilers are designed for generating saturated steam with a temperature up to 185 °С. Their steamgenerating capacity varies from 0,1 to 10 tons per hour at a steam pressure to 1,0 MPa. The boilers can be used to obtain steam for technological purposes of enterprises, as well as generation of heat energy for the heating systems of residential, public, and manufacturing buildings. The steam boiler with flame inversion consists of a cylindrical furnace with wetted bottom, where flame forms and combustion products are being inverted. Flue gases enter the tube pack of the front tube plate and are sent toward the back tube plate, which they leave through the flue connection. The boiler design ensures low heating and surface loads in the combustion chamber. The boiler body consists of shell, furnace, boiler bottom and flat tube plates made of highquality steel.

ЕСОPAR 10 bar steam boilers are designed for generating saturated steam with a temperature up to 185 °С. Their steamgenerating capacity varies from 0,1 to 10 tons per hour at a steam pressure to 1,0 MPa. The boilers can be used to obtain steam for technological purposes of enterprises, as well as generation of heat energy for the heating systems of residential, public, and manufacturing buildings. The steam boiler with flame inversion consists of a cylindrical furnace with wetted bottom, where flame forms and combustion products are being inverted. Flue gases enter the tube pack of the front tube plate and are sent toward the back tube plate, which they leave through the flue connection. The boiler design ensures low heating and surface loads in the combustion chamber. The boiler body consists of shell, furnace, boiler bottom and flat tube plates made of highquality steel.

ЕСОPAR 10 bar steam boilers are designed for generating saturated steam with a temperature up to 185 °С. Their steamgenerating capacity varies from 0,1 to 10 tons per hour at a steam pressure to 1,0 MPa. The boilers can be used to obtain steam for technological purposes of enterprises, as well as generation of heat energy for the heating systems of residential, public, and manufacturing buildings. The steam boiler with flame inversion consists of a cylindrical furnace with wetted bottom, where flame forms and combustion products are being inverted. Flue gases enter the tube pack of the front tube plate and are sent toward the back tube plate, which they leave through the flue connection. The boiler design ensures low heating and surface loads in the combustion chamber. The boiler body consists of shell, furnace, boiler bottom and flat tube plates made of highquality steel.

ЕСОPAR 10 bar steam boilers are designed for generating saturated steam with a temperature up to 185 °С. Their steamgenerating capacity varies from 0,1 to 10 tons per hour at a steam pressure to 1,0 MPa. The boilers can be used to obtain steam for technological purposes of enterprises, as well as generation of heat energy for the heating systems of residential, public, and manufacturing buildings. The steam boiler with flame inversion consists of a cylindrical furnace with wetted bottom, where flame forms and combustion products are being inverted. Flue gases enter the tube pack of the front tube plate and are sent toward the back tube plate, which they leave through the flue connection. The boiler design ensures low heating and surface loads in the combustion chamber. The boiler body consists of shell, furnace, boiler bottom and flat tube plates made of highquality steel.

ЕСОPAR 10 bar steam boilers are designed for generating saturated steam with a temperature up to 185 °С. Their steamgenerating capacity varies from 0,1 to 10 tons per hour at a steam pressure to 1,0 MPa. The boilers can be used to obtain steam for technological purposes of enterprises, as well as generation of heat energy for the heating systems of residential, public, and manufacturing buildings. The steam boiler with flame inversion consists of a cylindrical furnace with wetted bottom, where flame forms and combustion products are being inverted. Flue gases enter the tube pack of the front tube plate and are sent toward the back tube plate, which they leave through the flue connection. The boiler design ensures low heating and surface loads in the combustion chamber. The boiler body consists of shell, furnace, boiler bottom and flat tube plates made of highquality steel.

ЕСОPAR 10 bar steam boilers are designed for generating saturated steam with a temperature up to 185 °С. Their steamgenerating capacity varies from 0,1 to 10 tons per hour at a steam pressure to 1,0 MPa. The boilers can be used to obtain steam for technological purposes of enterprises, as well as generation of heat energy for the heating systems of residential, public, and manufacturing buildings. The steam boiler with flame inversion consists of a cylindrical furnace with wetted bottom, where flame forms and combustion products are being inverted. Flue gases enter the tube pack of the front tube plate and are sent toward the back tube plate, which they leave through the flue connection. The boiler design ensures low heating and surface loads in the combustion chamber. The boiler body consists of shell, furnace, boiler bottom and flat tube plates made of highquality steel.

ЕСОPAR 10 bar steam boilers are designed for generating saturated steam with a temperature up to 185 °С. Their steamgenerating capacity varies from 0,1 to 10 tons per hour at a steam pressure to 1,0 MPa. The boilers can be used to obtain steam for technological purposes of enterprises, as well as generation of heat energy for the heating systems of residential, public, and manufacturing buildings. The steam boiler with flame inversion consists of a cylindrical furnace with wetted bottom, where flame forms and combustion products are being inverted. Flue gases enter the tube pack of the front tube plate and are sent toward the back tube plate, which they leave through the flue connection. The boiler design ensures low heating and surface loads in the combustion chamber. The boiler body consists of shell, furnace, boiler bottom and flat tube plates made of highquality steel.

ЕСОPAR 10 bar steam boilers are designed for generating saturated steam with a temperature up to 185 °С. Their steamgenerating capacity varies from 0,1 to 10 tons per hour at a steam pressure to 1,0 MPa. The boilers can be used to obtain steam for technological purposes of enterprises, as well as generation of heat energy for the heating systems of residential, public, and manufacturing buildings. The steam boiler with flame inversion consists of a cylindrical furnace with wetted bottom, where flame forms and combustion products are being inverted. Flue gases enter the tube pack of the front tube plate and are sent toward the back tube plate, which they leave through the flue connection. The boiler design ensures low heating and surface loads in the combustion chamber. The boiler body consists of shell, furnace, boiler bottom and flat tube plates made of highquality steel.

ЕСОPAR 10 bar steam boilers are designed for generating saturated steam with a temperature up to 185 °С. Their steamgenerating capacity varies from 0,1 to 10 tons per hour at a steam pressure to 1,0 MPa. The boilers can be used to obtain steam for technological purposes of enterprises, as well as generation of heat energy for the heating systems of residential, public, and manufacturing buildings. The steam boiler with flame inversion consists of a cylindrical furnace with wetted bottom, where flame forms and combustion products are being inverted. Flue gases enter the tube pack of the front tube plate and are sent toward the back tube plate, which they leave through the flue connection. The boiler design ensures low heating and surface loads in the combustion chamber. The boiler body consists of shell, furnace, boiler bottom and flat tube plates made of highquality steel.

ЕСОPAR 10 bar steam boilers are designed for generating saturated steam with a temperature up to 185 °С. Their steamgenerating capacity varies from 0,1 to 10 tons per hour at a steam pressure to 1,0 MPa. The boilers can be used to obtain steam for technological purposes of enterprises, as well as generation of heat energy for the heating systems of residential, public, and manufacturing buildings. The steam boiler with flame inversion consists of a cylindrical furnace with wetted bottom, where flame forms and combustion products are being inverted. Flue gases enter the tube pack of the front tube plate and are sent toward the back tube plate, which they leave through the flue connection. The boiler design ensures low heating and surface loads in the combustion chamber. The boiler body consists of shell, furnace, boiler bottom and flat tube plates made of highquality steel.

ЕСОPAR 10 bar steam boilers are designed for generating saturated steam with a temperature up to 185 °С. Their steamgenerating capacity varies from 0,1 to 10 tons per hour at a steam pressure to 1,0 MPa. The boilers can be used to obtain steam for technological purposes of enterprises, as well as generation of heat energy for the heating systems of residential, public, and manufacturing buildings. The steam boiler with flame inversion consists of a cylindrical furnace with wetted bottom, where flame forms and combustion products are being inverted. Flue gases enter the tube pack of the front tube plate and are sent toward the back tube plate, which they leave through the flue connection. The boiler design ensures low heating and surface loads in the combustion chamber. The boiler body consists of shell, furnace, boiler bottom and flat tube plates made of highquality steel.

ECOPAR 0.7 BAR LINE ЕСОPAR steam boilers are designed for generating lowpressure steam for purposes of production and heating supply of residential, public, and manufacturing buildings. ЕСОPAR steam boilers are seriesproduced in the range of nominal steamgenerating capacity from 0,1 to 10 tons per hour with a rated pressure of 0,7 bar (0,07 MPa) and designed for generating saturated steam with a temperature up to 120 °С according to the saturation point at the operating pressure. ЕСОPAR steam boilers are firetube with a passthrough furnace, threecourse version, with installed swirlers for enhanced performance and decreased combustion intensity. The boiler design makes it possible to maintain and clean the boiler flue and firetubes by opening the rotable parts of the front and the tailpiece of a boiler.

ECOPAR 0.7 BAR LINE ЕСОPAR steam boilers are designed for generating lowpressure steam for purposes of production and heating supply of residential, public, and manufacturing buildings. ЕСОPAR steam boilers are seriesproduced in the range of nominal steamgenerating capacity from 0,1 to 10 tons per hour with a rated pressure of 0,7 bar (0,07 MPa) and designed for generating saturated steam with a temperature up to 120 °С according to the saturation point at the operating pressure. ЕСОPAR steam boilers are firetube with a passthrough furnace, threecourse version, with installed swirlers for enhanced performance and decreased combustion intensity. The boiler design makes it possible to maintain and clean the boiler flue and firetubes by opening the rotable parts of the front and the tailpiece of a boiler.

ECOPAR 0.7 BAR LINE ЕСОPAR steam boilers are designed for generating lowpressure steam for purposes of production and heating supply of residential, public, and manufacturing buildings. ЕСОPAR steam boilers are seriesproduced in the range of nominal steamgenerating capacity from 0,1 to 10 tons per hour with a rated pressure of 0,7 bar (0,07 MPa) and designed for generating saturated steam with a temperature up to 120 °С according to the saturation point at the operating pressure. ЕСОPAR steam boilers are firetube with a passthrough furnace, threecourse version, with installed swirlers for enhanced performance and decreased combustion intensity. The boiler design makes it possible to maintain and clean the boiler flue and firetubes by opening the rotable parts of the front and the tailpiece of a boiler.