Blades%20and%20knives-%20industrial - Import export

Toothed serrated for cutting or perforating plastic, packaging, paper.

Automatic Safety knives, self retracting, fully secured, replacement blades.

Flat, dished, toothed, bottom knives, knife holders

For packaging- , food-, automotive-, medical- or special applications

Belt width: 500-2000 mm Recommended speed: max. 3.0 m/s Side channel blower: SC50C 1100T Motor power (blower): 11.0 kW Airflow (blower): max. 1100 m3/h Ideal for conveyor belts with heavily worn surface

For punching film or plastic packaging, manufactured according to customer requirements

In all common dimensions. For the production of paper carrier bags.

For gravure, flexo and offset printing, with a wide variety of working edges, made from a wide variety of materials. We always have the material in stock for the most common chamber doctor blade systems.

Whether cutting, sawing or perforating tooth, for all printing machines and grammages. Manufactured from conventional steel strips to high-alloy and powder metallurgical steels.

Knives for plastic and paper packaging

Special knives for beverage and filling machines

Fold and counter flaps with Metko or Vulkollan coating

Washing squeegee with rubber lip for all common printing machines and inks.

For separating plastic or foil webs

• For straight cuts • Cutting edge hardness 56-58 HRC • Cutting edges inductively hardened • Re-adjustable screw-joint • Handles coated with plastic • Made of tool steel, forged, oil-hardened

Deburring cutters for tire finishing Tire deburring cutters and pin vent trimmers, tools to trim air vent whiskers and finish off tires after the curing process… We offer a broad range of models to handle most requirements of both tire manufacturers and re-treaders. All our blades are heat treated for quality and endurance.

Serrated / toothed stainless steel knife is the optimal machine knife to cut industrial tape. Suitable for: Cross cutting of tape Cutting tape to length without dust Dimensions: 85x30x1.5mm 45° tooth angle bevel 8° to 9.5m long before toothing 20° grinding angle oval hole 14x5.25mm cutting depth 9.5mm

High quality industrial razor blade in stainless steel, especially adapted for plastic film manufacturing. best used for cutting simpler films with few additives. For higher performance and durability, Sollex recommends industrial razor blades with a ceramic coating (2-030-K) or zero friction-coating (2-030-Z). Suitable for: SImpler plastics with few additives Grinding: Double edge Two sided Double bevel Material: Stainless steel Packaging: 100 blades packaged in a transparent, industrial type box that allows the user to see how many blades remain https://www.sollex.se/en/product/straight-3-hole-blade-43x22x030mm-ss

We produce special cutting tools for cutting credit cards and cards of a similar shape and their assembly, on paper, but also on sheets. Our dies are used, for example, in the manufacture of medicines. Custom production of special knives and assemblies Based on our customers' suggestions, we often develop and produce special cutting tools. We will also produce entire tools according to the submitted drawing documentation. Service and reconstruction of special tools In the case of cutting assemblies, we cut individual parts or perform complete reconstructions, including the production of new parts. Surface finish Special coatings are applied to the knife to extend the lifespan. Surface thickness 2-6 µm. PVD-VARIANTIC alternative Duplex (PVD coating + nitriding)

We supply cutting boards for most die-cutting machines and semi-automatic machines. According to the customer's wishes, we deliver various dimensions and levels of hardness. We also supply a variety of hardened plates for cutting, which serve as a support surface for knives. Hardened plates are intended for example for platen presses.

In the majority of sheet metal cutting, this is a scissor cut. We supply knives for sheet metal cutting from 0.3 mm to 30 mm, up to a maximum of 2400 N/mm2. We supply knives for machines of many manufacturers Here are some machine manufacturers to which we supply knives.We produce knives for sheet metal shears of various shapes up to a length of 4100 mm. We carefully select the most suitable steel for your use so that your knives achieve maximum performance. We monitor individual manufacturing operations throughout the manufacturing process. Tolerance 0.02 mm to 4000 mm We pay great attention to quench hardening Grinding and final operations go through the final inspection. The knives produced here are within a tolerance of 0.02 mm to 4000 mm.

Circular knives are always very sharp, whether before or after use, and serious injuries can occur if used improperly. Our circular knives for paper are serially equipped with a blade guard by the manufacturer. It may only be removed when the knife is put into operation. This also applies to the assembly and disassembly of knives onto the machine or off the machine, and in the case of machine repair in the area of circular knives. When handling circular knives (transport, assembly, disassembly), personal safety equipment such as cut-resistant shoes, safety shoes, etc. must be observed. This is true even when the blade guard is attached. The circular knife for paper may be used for the purposes described herein. Other use is not permitted. Improper use can lead to serious injuries. Follow the machine manufacturer's instructions

The purpose of perforating knives is to perforate the material intermittently, thus cutting the material so that it can be torn off easily later. Perforating knives are used to perforate a wide range of products. From small items such as tear-off calendars, forms, toilet paper, paper bags to cement bags. We produce perforating knives according to the customer's wishes We produce perforating knives for perforating paper, plastics and textiles. At the customer's request, we can produce perforating knives in different perforation ratios, thus with different cut and uncut sections. We supply perforating knives with different tooth shapes according to the customer's wish, length, design, hardness and used steel.

We produce a full range of knives for cardboard, knives for slotting machines such as Emba, Curioni, Göpfert, Jurin, Rapidex, etc. We supply a complete range of knives for flap box production. Segmental knives are also produced according to the drawing documentation or according to the model. We make our own drawing documentation. We produce various knives for bridge die cuts. We also produce ryles for cardboard penetration. We offer various accessories, such as blade holders.

We sharpen not only industrial knives made by us , but also knives from other manufacturers. We use the most modern grinders for sharpening knives. Knives are sharpened with special angles that we have tested and can recommend as the most suitable for the given method of use. Parameters of sharpening knives and saws We grind knives up to a length of 4500 mm , circular knives and saws up to a diameter of 600 mm . We grind all types of steel and carbide (HM or also TC). Your knives are sharpened by specially trained workers on the most modern machines, we guarantee an accuracy of 0.005 mm per 2.5 m. Loads of sharpened knives We pack and deliver knives throughout the Czech Republic. We provide consultancy to our customers in the field of knife life and their use. Knife sharpening – sharpening of dies and tools of special punches.

We have most knives in stock for quick delivery. Knives are delivered in protective cases. They are also preserved for long-term storage. We also produce monolithic knives based on drawing documentation. Cutting angles We deal with cutting in a comprehensive way, we also carry out consulting activities and will recommend the cutting angles of the knives, we will also recommend the most suitable knife material, etc. On this page you will also find general recommendations for angles for individual types of paper.

We also supply paper stops where the stack of paper needs to be tapped when it starts. We supply them in two sizes. An ergonomically-adjusted handle prevents fatigue, the stop is provided with a lower hardened edge. We provide the grinding of all knives purchased by us. The price list for knives not purchased here can be found in the grinding knives section.

We also supply paper stops, when the stack of paper needs to be lowered if it starts moving. We supply them in two sizes. The ergonomically adjusted handle prevents fatigue, the stop is provided with a hardened bottom edge. We ensure sharpening of all knives purchased from us . You can find the price list for knives not purchased from us in the knife sharpening section .

We carry out profile grinding of tools up to dimensions of 2000 mm x 800 mm . We grind the desired shape into the hardened material, we have huge potential. Thanks to the 7-axis grinder, we achieve precise quality and incredible shapes. The disc magazine allows multiple surfaces and shapes to be clamped in one clamp. CNC grinding Shape grinding Profile grinding We will grind any shape 7 axis grinder Grinding length 2500 mm