Black marking - Import export

4 bevelled edges to limit the risk of falling very resistant thanks to its vinyl surface excellent grip thanks to its treadplate surface look model with yellow marking to delimit a safety zone thermal insulation relieves back and leg fatigue long lifespan and excellent shape memory thanks to its thick 100% closed cell nitrile foam high resistance to wear improves working conditions and productivity for people standing high performance antifatigue function for 3x8 work NT615 : High performance Colors: black (B) or black with yellow marking (BY)

Indexing pin steel, hardened, ground and black oxidised. Threaded sleeve black oxidised. Lock mark red anodised. Note: Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the plunger has been manually disengaged. When the lock mark is visible the plunger is either completely disengaged or only partly in the index position.

Housing steel. Viewing glass thermoplastic polyamide. O-ring and flat seal rubber (NBR). Reflector aluminium. Screw and hex nut steel. Version: Housing painted black. Transparent viewing glass, high mechanical stability, non-ageing, temperature resistant with oil up to 100 °C, with water up to 70 °C. Reflector painted white, markings and scale black. Screw and hexagon nut, electro zinc-plated. Note: The oil level gauges can either be fastened as shown in the illustration or directly in the threaded hole. Centre distance for the fastening holes = L1 ±0.5. The oil level gauges are suitable for tanks operating without pressure. Maximum operating temperature: 100 °C.

Holstein-Friesian breed of large dairy cattle originating in northern Holland and Friesland. Its chief characteristics are its large size and black and white spotted markings, sharply defined rather than blended. By-products: Tripe, Intestine, Fat, Kidney, Liver, Heart, Testicles, Tongue, Trimmings, Head trimming. Characteristics: The largest cattle among dairy breeds. Consume very large amounts of roughage. Have a high percentage of “lean meat”. Precocity. Adapts well to different climatic conditions. Slaughter yield is 55-60%.

They provide low-cost protection of machinery and equipment against forklifts, roller containers, pallet trucks, etc. Additionally, they can be used to protect cabinets and wall-mounted devices such as instruments, control cabinets, first aid equipment, etc. Their low profile allows easy access for pedestrians to protected areas. Each collision bar is made of the toughest steel and provides excellent protection for nearby assets, especially in warehouses where forklifts or pallet trucks are often used. Each stop is powder-coated yellow and has black markings to alert nearby forklift and pedestrian users.

Fencing is commonly used to protect industrial gates, pedestrian fences, and shipping routes to protect pedestrians and transport routes, to protect sensitive areas, and to protect machinery and production lines. Bumpers are installed in warehouses, production plants, loading docks, etc. They provide basic protection against vehicle impact. The column barrier are made of high-quality steel. The products are powder coated in yellow and additionally marked with black stripes. The end of the post is permanently sealed with a welded steel plug. Bumpers both effectively protect storage shelves, machines, and equipment of the production line as well as structural elements of industrial halls.

Bumpers inform about the lowering of the ceiling level and also prevent the passage of too high cars. If the vehicle is too large, it will breach the suspended stop, but it will not damage the building structure. The height barrier works in a variety of locations. It provides the best visibility in industrial facilities, warehouses, and halls. It is indispensable when entering an underground garage or a multi-storey car park. It is also used in front of bridges and viaducts. We offer hanging barrier of various lengths (from 1 to 2 m) and diameters (from 48.3 to 76.1 mm). They are made of high-quality black steel, ensuring exceptional durability and resistance to deformation. Each of the barrier was powder painted yellow and then additionally marked with black reflective stripes, which guarantees perfect visibility of the models even from a greater distance. Hanging barriers are easy and quick to install on solid chains. They can be installed both inside and outside

Squeegee with single, 6 mm thick black non marking blade Pre-galvanized straight and curved steel frame, with built-in scraper Fits 24,5 tapered handles To be used on coated and uncoated smooth concrete floors, asphalt and other smooth surfaces For moving large volumes of water, mud, slush, snow,... Used in factories, construction sites, agriculture facilities,... Available in 45cm/18", 61cm/24", 76cm/30" and 91cm/36 Logistic information 6 pcs / box

This brightly-coloured barrier chain (black/yellow) serves to mark the edge of a fall danger zone. The chain (8 mm) is made of weather-resistant synthetic material. The stainless steel posts are weighed down using special UV-resistant plastic weights. Stainless steel posts with specially-designed UV-resistant plastic weights Weather-resistant synthetic barrier chain Gate post equipped with a carabiner for opening and closing the system Warning plate (224 x 124 mm) Minimum distance to the edge: 2 m Posts can be placed up to 5 m apart

Sizes: 63 mm & 80mm Dial diameter and 100 mm (4”) & 150mm (6") Mounting: Direct, Surface and Flush Case & Bezel: Full Safety Pattern case to S3 standard and Die Cast Scale Ranges: 0 to 600 mbar to 0 to 1400 bar, 0 to 400 mBar up to 0 to 1400 Bar Pressure Element: ≤80 Bar for 316 Stainless Steel Bourdon Tube and ≥81 Bar for 316 Stainless Steel Coil Overload: Up to 130% of FSD Pressure Connection in 316 Stainless Steel: 3/8”, 1/2” BSP and 1/2" NPT Accuracy Class: 1% of FSD (CL1) as defined in EN837-1 (Options available) Operating Temperature: -20 to +90 ºC operating Dial: White Anodised Aluminium marked in black finish Pointer: Stainless steel coloured black Movement: Stainless Steel Construction Window: 3mm Laminated Safety Glass (Standard) Environmental Rating: IP67 as defined in EN 60 529 Traceability: Calibrated with unique Serial Number printed on the dial Certification: BS EN 10204 3.

Workplace equipment and furnishings made of profile technology Slot: 5 - 10 INFORMATION SUPPLY Monitor arms and monitor holders VESA compatible, height adjustable, horizontally and vertically alignable Labelling clip: Labelling of profiles TOOL SUPPLY Cup holder: For placing a bottle or hanging a tool MATERIAL SUPPLY Grab containers: Provision of small parts on separation surface and selective pick-up Can be mounted by swivelling into the profile slot and onto the suspension profile and perforated plate optional adapter can also be swivelled horizontally in the profile groove Optional fixing option Highly visible marking field black, yellow, red, green, grey Tool hanger: Attachment of tools LIGHTING Magnifying luminaire D160 with articulated arm and dimmer fatigue-free and ergonomic work without irritating shadows electrostatic discharge version also available other colors/sizes on request

The BSC grinding materials are widely used in the abrasive tools manufacturing and fixed-abrasives - rougher, cutting-off and grinding; tools on a flexible base - coated abrasives, in the process of loose abrasive grains grinding. The BSC grinding materials are used: in the process of iron and nonferrous metals, carbon, glass and ceramics, stone, concrete, bricks and chamotte, wood substance, plastics, leather, rubber, and other hard, tough, brittle, alloys, and materials of natural and artificial origin treatment; in the refractory and ceramic industries as a component for moldings and antipenetration washes, in the process of crucibles for casting of non-ferrous and precious metals production, for wash troughs. Refractory products of silicon carbide abrasive materials have high thermal conductivity, heat resistance (deformation starting above 1500 C), resistance to acid slags.