Ventilators - Import export

Stackable euronorm box, ventilated bottom and ventilated sides PRODUCT INFORMATION Outside dimensions 600x400x50 Inside dimensions 555x355x31 Weight 805 Volume 8 Quantity per pallet 160 Pallet size 800x1200 Height pallet 1820 MOQ 500 Material: PP

"IP23 ventilated open motors (ODP) are an ideal solution for our customers who want compact and smaller motors than IP55 motors. In general, these motors have one less frame size. They are mainly used in clean environments (e.g. manufacturing of plastic bottles for soft drinks, cold compressors for food freezing, ...) STANDARD OPEN VENTILATED MOTORS (OUR CODE: MOV) - Three-phase motors with cast iron housing - IP23 protection - Insulation class F - Heating class B - Legs molded in the casing - Stored in 230/400V - 400/690V - Operating in 50/60hz - Cooling IC01 - Other special voltages or insulation class H on request - Stored speed : 3000 rpm or 1500 rpm or 1000 rpm - Efficiency IE3/IE4 (tomorrow IE5) - Form B3-B5-V1-B35-V15 - Standard motors equipped with PTC sensors for all motors - Motors are equipped with an isolated bearing for use with a variable speed drive. The PI will eliminate circulating currents in the rotor. - Provided with two ball bearings

"The world is changing and companies are under increasing pressure from environmental policies. An international standard was established in 2008 and updated in 2014 to classify the international energy efficiency (IE) of low-voltage three-phase induction motors. This is the IEC/EN 60034-30.1 standard. It reinforces the balance of international efficiency regulations. At Focquet, we have more and more IE4 motors to meet the needs of our environmentally conscious customers. We continue to invest heavily in this type of motor. OPEN VENTILATED MOTORS (OUR CODE: MOV) - Three-phase motors with cast iron cage - IP23 protection - Class F insulation - Heating class B - Legs molded in the casing - Stored in 230/400V - 400/690V - Operating in 50/60hz - Cooling IC01 - Other special voltages or insulation class H on request - Stored speed : 3000 rpm or 1500 rpm or 1000 rpm - Efficiency IE4 - Form B3-B5-V1-B35-V15 - Standard motors equipped with PTC sensors for all motors

Stackable euronorm box, ventilated bottom and ventilated sides PRODUCT INFORMATION Outside dimensions 400x300x220 Inside dimensions 357x255x202 Weight 920 Volume 20 Quantity per pallet 104 Pallet size 800x1200 Height pallet 2110 MOQ 500 Material: PP

Stackable euronorm box, ventilated bottom and ventilated sides PRODUCT INFORMATION Outside dimensions 600x400x70 Inside dimensions 555x355x60 Weight 995 Volume 12,5 Quantity per pallet 136 Pallet size 800x1200 Height pallet 2400 MOQ 500 Material: PP

Stackable, 50 % nestable box, perforated reinforced bottom and perforated sides PRODUCT INFORMATION Outside dimensions 600x400x144 Inside dimensions 554x356x124 Weight 1440 Volume 26 Quantity per pallet 120 Pallet size 800x1200 Height pallet 2380 MOQ 500 Material: PP

Stackable, 50 % nestable box, perforated reinforced bottom and perforated sides PRODUCT INFORMATION Outside dimensions 600x400x320 Inside dimensions 557x356x304 Weight 2400 Volume 60 Quantity per pallet 48 Pallet size 800x1200 Height pallet 2240 MOQ 500 Material: PP

Stackable euronorm box, ventilated bottom and ventilated sides PRODUCT INFORMATION Outside dimensions 600x400x120 Inside dimensions 555x358x94 Weight 1070 Volume 20 Quantity per pallet 72 Pallet size 800x1200 Height pallet 2100 MOQ 500 Material: PP

Stackable, 70 % nestable box, perforated reinforced bottom and sides PRODUCT INFORMATION Outside dimensions 600x400x150 Inside dimensions 499x360x142 Dimensions bottom inside 480x336x142 Weight 1440 Volume 25 Quantity per pallet 172 Pallet size 800x1200 Height pallet 2400 MOQ 860 Material: HDPE

Stackable euronorm box, ventilated bottom and ventilated sides PRODUCT INFORMATION Outside dimensions 600x400x170 Inside dimensions 555x355x145 Weight 1420 Volume 30 Quantity per pallet 52 Pallet size 800x1200 Height pallet 2240 MOQ 500 Material: PP

Stackable box, ventilated reinforced bottom & vented sides PRODUCT INFORMATION Outside dimensions 500x300x180 Inside dimensions 461x265x175 Weight 1100 Volume 20,5 Quantity per pallet 104 Pallet size 1000x1200 Height pallet 2500 MOQ 500 Material: HDPE

Stackable box, solid waved bottom & ventilated sides PRODUCT INFORMATION Outside dimensions 500x300x180 Inside dimensions 461x265x175 Weight 1150 Volume 20,5 Quantity per pallet 104 Pallet size 1000x1200 Height pallet 2500 MOQ 500 Material: HDPE

Stackable euronorm box, ventilated bottom and ventilated sides PRODUCT INFORMATION Outside dimensions 600x400x200 Inside dimensions 555x355x187 Weight 1690 Volume 40 Quantity per pallet 44 Pallet size 800x1200 Height pallet 2240 MOQ 500 Material: PP

Stackable box, ventilated reinforced bottom & vented sides PRODUCT INFORMATION Outside dimensions 500x300x200 Inside dimensions 461x265x195 Weight 1010 Volume 23 Quantity per pallet 88 Pallet size 1000x1200 Height pallet 2200 MOQ 500 Material: HDPE

This circular motorised damper is suitable for ducts with 125 mm. The position of the damper blade can be set via Modbus RTU communication or a 0-10 V signal. The enclosure has an airtightness class D according to EN1751. To ensure this classification aluminium tape should be wrapped on the seam between damper/duct. The unit needs 24 VDC supply voltage. We recommend using Sentera 24 VDC power supplies with RJ45 connector. They are protected against overload, overvoltage and short circuit. Once installed the device is ready for use. The default settings will suffice for most applications. If you do need to change some parameters, this can be done via Modbus RTU communication.

This fan speed controller is used to control EC fan speed. The unregulated output can control a water valve or an electric heating element. Via the rotary knob the temperature can be set between 5 - 35°C. Fan speed is regulated manually in 5 steps, there's an Off-position and automatic mode. In automatic mode a temperature sensor PT500 is required. Choice between cooling/heating mode can be done via Modbus communication or a jumper. This controller can be connected to our SenteraWeb or a BMS-system. .

The STR-1-15L22 is a transformer fan speed controller with which you can manually regulate the fan speed of single-phase motors in 5 steps. The unit also has an off-position. It needs a 230 VAC/50-60 Hz supply voltage and has an unregulated output of 230 VAC that can control a damper, an external status indicator, etc. This output is active as soon as the motor is enabled. The sinusoidal shape of the generated motor voltage results in an exceptionally quiet motor operation and extended service life. The special impregnated coating reduces the electrical noise from the built-in autotransformer. This series is available in different amperes. The casing of the controllers up to 7,5 A is made from high quality plastic, while the models above 7,5 A have a metal housing. This transformer doesn't need any configuration. Once installed, it's ready for use.

This control unit has two 0-10 Volt outputs to regulate the EC fans. Via the 2 tacho inputs you can directly monitor the status of the fans and their speed, if tacho signals are available on the fans. HVAC sensors or potentiometers can be connected to the unit, via Modbus RTU communication or 2 analogue inputs. The built-in 24 VDC power supply can feed the external sensors or potentiometers. The controller itself needs a supply voltage between 85 - 305 VAC. Application specific firmware is needed for the unit to function. This firmware can be downloaded via Senteraweb, our online HVAC portal, where we already made a limited number of specific firmware version available, used in typical HVAC applications like destratification. The only thing that needs to be done is to select the appropriate functionality on the solution page of our website and download the firmware. No additional programming is required. TCMF8 is also available - for AC fan speed control.

This controller regulates the fan speed of single-phase motors from 1,5 to 10 A via phase angle control a.k.a. Triac technology. The supply voltage of 230 VAC can be turned off via the illuminated ON/OFF switch on the side of the unit. Via de potentiometer located on the front of the controller you can set the desired fan speed. Minimum speed can be adjusted via an internal trimmer and kickstart/softstart by adding/removing a jumper on the PCB of the controller. This controller is typically used to regulate the speed of AC fans or centrifugal pumps in HVAC systems. The regulator is also available with TK monitoring. This function will deactivate the motor in case of overheating. The code for this type of regulator suitable for 1,5 A is ITRS-15-DT.