Beam load cells - Import export

Cast stainless steel load cell for use in platform scales and for basic weighing of small to medium-sized containers. The load cell is available in threaded and T-end versions. IP67 protected.Available for use in EX-zones 1, 20, 21. For economic vessel weighing solutions Load cell capacity range from 91 kg to 2.268 t Accuracy class: 0.02 % Corresponding mounting kits

The MP 79/79T Bending Beam Weigh Cell is made from stainless steel and is available in a load range from 227 kg to 5099 kg. This weigh cell is specially designed for use in weighing platforms and simple hopper weighing applications. Protection class IP68, IP69K For economic vessel weighing solutions Hermetically welded IP68/IP69 Load cell capacity range from 227 kg to 5.099 kg Accuracy class: 0.02 % Corresponding mounting kits

The sensor element consists of a double bending beam with applied strain gages. Changes in the ohmic resistance of the strain gage fullbridge caused by applied forces are converted into electrical voltages. The precise value (characteristic value) of the output voltage, resulting from the application of a rated force to the sensor, is specified in the accompanying calibration protocol. The sensor has to be mounted by two screws on the cable side. The opposite side is meant to receive applied forces (loads). Once the rated stress or strain is exceeded by 20 %, further deflection of the bending beam is prevented by an integrated, mechanical stop. This protects the sensor element against permanent deformation.

The measuring element of this load cell consists of a double bending beam with strain gauges, the resistance of which changes with the application of force. Upon applying a voltage to the strain gauge bridge, the change in the strain gauge resistance is converted into output voltage, which is directly proportional to the force. The strain gauges and the entire measuring element are protected from water spray by metal cover including sealing material. The tensile or compressive load to be measured is applied to the sensor element through the M6 threaded hole located on each end face. The load can be applied easily, along the sensor axis. This serves to prevent falsification of the measured values. Overload protection can be realized with little effort using a mechanical stop. FEATURES Measuring ranges from 0 … 20 N to 0 … 880 N Relative non-linearity: ±0.25 % F.S. Many load cycles Protection class IP54 Excellent price-performance ratio burster TEDS optionally available

The measuring element of the load cell consists of a double bending beam on which strain gages are applied. The applied force detunes the measuring bridge so that a proportional output voltage is generated. The strain gages on the measuring element are protected against dirt and water spray by a rubber bellows. The sensor can be easily mounted via two mounting holes. The tension or compression force to be measured is introduced at the opposite end perpendicular to the sensor axis. Due to its special design, the influence by an extension (e.g. touch finger) on the measuring signal is low. Overload protection can be realized with little effort using a mechanical stop. FEATURES For tension and compression forces Measuring ranges from 0 ... 5 N to 0 ... 2 kN Relative non-linearity: ≤ ±0.1 % F.S. Very low mounting height Simple force application Material aluminium or stainless steel Special design on request burster TEDS optionally available

WEIGHING BARS FPPMB SERIES - INDICATOR EXCLUDED Pair of weighing bars suitable for weighing boxes or pallets such as hoppers, conveyor belts, roller conveyors, tanks, crates, etc. They can be applied in packaging lines for weighing boxes and pallets pre-filled with material. CE-M verifiable standard version for sale to third parties. TECHNICAL FEATURES - Functioning with 4 shear-beam approved IP68 stainless steel load cells (PMBL) and with 2 approved off-center aluminum load cells (PMBS-PMBM-PMBX), according to OIML R60 standards with protection against dust and humidity according to IP65 standards (350 Ohm input resistance). The price indicated refers only to weighing bars. The photos are purely indicative and show the various applications of the bars (*) CE-M divisions obtainable only with the relative options, combined with our indicators.

WFP-PRO SERIES SCALES U-PROFILE - TRANSPORTABLE - INDICATOR EXCLUDED Pallet weighing scales with low U-profile. They are suitable for rapid weighing of goods on pallets and can be easily handled in workshops and warehouses. CE-M approved The scales are available in RAL 5007 painted steel or in AISI 304 stainless steel. TECHNICAL FEATURES: - Functioning with 4 shear-beam load cells approved according to OIML R60 standards, with dust protection. - Oven-painted steel structure, RAL 5007 blue color. - Adjustable anti-shock adjustable feet, level bubble, 2 wheels and carrying handles. - Power supply 5/15 Vdc. - 5 m shielded cable complete with connectors for connection to the indicator. - The stainless steel scales have a height of 75 mm, articulated self-centering, non-slip and anti-vibration feet, adjustable in height and structure, mechanics, AISI304 stainless steel hardware and IP68 stainless steel load cells.

FLOOR SCALES "FLOOR" SERIES FPFL - WEIGHT INDICATORE EXCLUDED The FLOOR series scales are normally used in industrial and commercial areas of all kinds for weighing pallets, boxes or packages. They can be installed in the floor or on an already existing packaging lines. The scales are available in standard version or with approved CE-M load cells for sale to third parties. TECHNICAL FEATURES PLATFORM WEIGHING · Fitted with 4 shear-beam load cells of 350 ohm nickel-plated steel, approved according to OIML R60 C3 standards (3000 divisions), IP67 protection. · Monoblock tubular oven-painted steel, with adjustable resting feet and level. · Lobed fixed load floor, sheet steel. · Power Max. 15 Vdc. · Hermetic junction box, IP67 wiring with 3m shielded cable for connection to the indicator. (*) CE-M scale divisions (approved) obtainable only with the relative options, together with our indicators.

FLOOR SCALES WITH LOADING RAMPS FPL SERIES WITH LOW PROFILE - INDICATOR EXCLUDED Low profile platforms, with embossed steel frame and ramps in painted steel. They are suitable for weighing trolleys and pallet trucks as they are equipped with loading/unloading ramps and side rails on the weighing platform. Available in standard or CE-M approved version TECHNICAL FEATURES - Operation with 4 350 Ohm shear-beam load cells in nickel-plated steel, approved according to OIML R60 C3 standards (3000 divisions), IP67 protection degree. - Structure and loading surface embossed in steel, oven painted, RAL 5007 blue color. - Adjustable anti-shock adjustable feet and level bubble. - Power supply from 5 to 15 Vdc. - Hermetic junction box, IP67 wiring with 5m shielded cable for connection to the indicator. - Side rails and double ramp up/down, standard.

PALLET TRUCK SCALE SERIES TPWN09 "NETWORK" Pallet trucks with integrated electronic weighing, handy and easy to use. Equipped with 4 load cells shear-beam, which could achieve greater precision weighing, and multifunction weight indicator, with large backlit display to permit the optimal reading weight even in low light conditions. Series not homologated. Available in two models: TPWN09: weighing transpallet with forks width mm. 550 - division 0,2 Kg - capacity 2000 Kg. TPWN09L: weighing transpallet with forks width mm. 680 - division 1 Kg - capacity 2000 Kg. MAIN FUNCTIONS High resolution x10 display - net / gross or lb / kg conversion - weight totalization - formulation - percentage weighing - piece counter - +/- control KEYBOARD FUNCTIONS Zeroing - semi automatic tare - manual tare Conversion lb / kg - Free conversion factor (meter counter, liter counter, ..) - weight totalization - piece counter - hold

Universal load cell combining sturdy design, high accuracy and low cost. Sturdy design o Complies with OIML / R60 up to 3000 d for scales in class III (EN 45501) Mounting kits available with following properties stabilisation without tension rods compensation for thermal dilatations and default of parallelism

Load cells for silo weighing combining a sturdy design with easy installation.

Load cell combining high accuracy and resistance in harsh environment. Complies with OIML / R 60 up to 3000 d for scales in class III according to EN 45501 Standardised dimensions Whole range of mounting kits available

This weighing module GML-DHH5 bending beam load cell has the material option of alloy steel and stainless steel. It is compact and easy to install. The weighing capacity is from 10kg to 1000kg, which is usually used for hopper scale, belt scale, and batching scale. It can fulfill a wide range of industries that require precise measurements, avoiding product waste and saving costs.

This weighing module with GML-DHH8Q shear beam load cell has the material option of alloy steel and stainless steel. It is compact and easy to install. The weighing capacity is from 500kg to 10000kg, which is usually used for floor scale, batching silo, and industrial platform scale. It can fulfill a wide range of industries that require accurate measurements, avoiding product waste and saving costs.

The robust and well-designed load cell from General Measure, with the C2/C3 grade accuracy. GML-DHH5 bending beam load cell has the material option of alloy steel and stainless steel. It is compact and easy to install. The weighing capacity is from 10kg to 1000kg, which is usually used for hopper scale, belt scale, and batching scale. It can fulfill a wide range of industries that require precise measurements, avoiding product waste and saving costs.

This weighing module with GML-DHH8B shear beam load cell has the material option of alloy steel and stainless steel. It is compact and easy to install. The weighing capacity is from 500kg to 2000kg, which is usually used for floor scale, batching silo, hopper scale, and industrial platform scale. It can fulfill a wide range of industries that require accurate measurements, avoiding product waste and saving costs.

This weighing module with GML-DHH8SB shear beam type load cell has the material option of alloy steel and stainless steel. It is compact and easy to install. The weighing capacity is from 500kg to 25000kg, which is usually used for floor scale, batching silo, hopper scale, and industrial platform scale. It can fulfill a wide range of industries that require accurate measurements, avoiding product waste and saving costs.

This weighing module with GML-DHH8SB shear beam type load cell has the material option of alloy steel and stainless steel. It is compact and easy to install. The weighing capacity is from 500kg to 25000kg, which is usually used for floor scale, batching silo, hopper scale, and industrial platform scale. It can fulfill a wide range of industries that require accurate measurements, avoiding product waste and saving costs.

The robust and well-designed load cell from General Measure, with the C2/C3 grade accuracy. GML-DHH8SB shear beam type load cell has the material option with alloy steel and stainless steel. It is compact and easy to install. The weighing capacity is from 500kg to 25000kg, which is usually used for floor scale, batching silo, hopper scale, and industrial platform scale. It can fulfill a wide range of industries that require accurate measurements, avoiding product waste and saving costs.

SBS lama type of stainless steel load cell. It has wide application areas with its strong structure. Thanks to its stainless steel structure, it is used in harsh environmental conditions such as food, chemical and process applications. Specifications Weighing capacity up to 1.000 kg - 10,000 kg Stainless steel IP68 Protection class High precision Easy montage Resistant to side loads OIML, CE Certificated Ex-Proof Option Apps Tank-Silo and bunker weighing systems Platform weighing systems Industrial Weighing Systems

The MP 55 Platform Weigh Cell is made completely from stainless steel, is available in a load range from 11 kg to 200 kg and platform sizes up to 600 mm x 600 mm. It is specially designed for integration into beltweighers, counting scales and checkweighers. Protection class IP68, IP69K Full stainless steel construction Hermetically welded seal (IP68, IP69K) Platform size up to 600 mm x 600 mm Approved to OIML R60 Ex-Version available (MP55/...E) High Input Impedance Integrated Mounting spacer

Ideal for installation in platform scales and integration into machines: with the CB17 single point load cell, you rely on proven quality from a leading manufacturer of industrial weighing technology. Suitable for load ranges from 600 g to 3 kg and a platform size of up to 200 mm × 200 mm.

Ideal for integration in bench scales, counting scales and checkweighers: with the LC made from aluminium Single Point load cells, you can rely on the tried-and-tested quality of a leading manufacturer of industrial weighing technology. Suitable for load ranges of 5 kg to 750 kg and a platform size of up to 800 mm × 800 mm

Suspended mounting can better compensate for vessel movements. — Reliable weighing thanks to high resolution and accuracy class — Accuracy class: N (0,03%) and C3 (0,025%) — Specially designed for suspended vessel scales — Versatile optional weighing electronics Design-in support from specialists

The PR 6202 is the world's first load cell designed strictly in accordance with the hygienic design principles developed by the European Hygienic Engineering Design Group (EHEDG). Proven rocker-pin principle Easy corner adjustment by matched load cell output Full stainless steel construction Wide temperature range High overload capacity Resistant against vibrations Hermetically sealed, IP68 (depth of 1.5 m for 10,000 hrs.), IP69K Ex-version available (PR 6202/..E) W&M approval (acc. OIML R 60)

Ideal for installation in checkweighers: The single point load cell U2D1 is ideal for dynamic applications due to its design. Suitable for load ranges from 3 kg to 100 kg and a platform size of up to 200 mm × 200 mm.

The load cell PR 6212 is a state-of-the-art product. This corrosion resistant load cell has a compact design and also features high heat resistance. Its long product lifetime minimises downtime and ensures safer and more reliable processes in the chemical and steel industry. Compact design ensuring a low system height Maximum corrosion resistance High-temperature version available for up to 180 ˚C Load cell capacity range from 500 kg to 10 t Accuracy class: 0.04 % Corresponding mounting kit: PR 6012

With its flat construction this force sensor is specially designed to be fitted to a pedal. By this, the operator's forces for each respective action, for example brake tests, can be measured directly and the reaction of the vehicle or machine can be designated. This applies to real test drives, as well as in driving simulators. Due to the special construction of the membrane, it is irrelevant whether an upright or hanging pedal is concerned. The sensor is designed in a way that unavoidable lateral forces have as little impact on the measurement result as possible. Using a central internal thread on the control surface, various machine-related adaptor parts can be easily mounted. Because the pedal is convex-shaped on its surface, the pedal force sensor has a very rigid base plate and therefore can easily be applied to various geometrics. The mounting can even take place on a pedal with an elastomer covering.