Battery backup - Import export

ESS Energy Storage Systems are Lithium batteries backup power source The outdoor integrated energy storage system designed for commercial and industrial purposes incorporates the "hands-free, no installation" approach. It merges various components, including lithium iron phosphate batteries, a battery management system (BMS), an energy storage converter PCS, a photovoltaic inverter, air conditioning, fire protection, and other equipment, within a single energy storage outdoor cabinet. The system features an integrated design that includes photovoltaic and intelligent energy storage control. This ensures a safe and stable power supply while maximizing. the utilization of renewable energy sources.

All in one ! Extra flat battery. Trendy, practical creation. With two integrated charging cables equipped with a Type-C connector. Do not have to worry about carrying adapter cables while you're on the go. This battery backup gives you enough to charge at least one and a half times your phone

Magnetic display MA508SG. Measurement lengths up to 2000 mm. Resolution of 0.1 mm. Maintenance-free backup battery. Long battery life. Easy mounting. Compact design.

High-resolution encoder MSA213C for drive technology The requirements for sensors used for position detection in automation and drive technology increase with the complexity and performance of the associated machines and systems. A new MSA213C high-resolution absolute sensor from SIKO is a perfect solution. It not only supplies the absolute position at any time without referencing and without requiring a backup battery, but thanks to its small design and many different interfaces, it can also be integrated into the system and control environment with very little effort.

Rentaload offers the rental of direct current load banks, allowing the reliability of a battery to be tested. Testing using load banks validates the operational performance and battery life of a system. It tests the inverter and generator under load conditions. Indeed, these tests, most often performed during preventive maintenance, can determine the condition of the inverter’s batteries and battery packs (or “strings”) and indicate whether individual cells are in good condition or approaching end of life and must be replaced. The load bank test will ensure that the backup system batteries will work together as expected when called upon to support a critical load.

The SlimLane 950 Swing Door Barrier Optical Turnstile provides enhanced access control in both directions of passage. It offers a wider passage for people with reduced mobility or for service personnel in a compact footprint. NEW: SimLane 950SC with a smaller footprint for a better integration! Safety UL 2593 certified for maximum user protection Dynamic, electronic user protection based on traffic direction EGRESS operating mode meets the highest fire safety standards Design to prevent finger entrapment and all impacts Precision controlled tempered glass obstacles In the event of power outage, the obstacles will breakaway manually with minimal force or will open automatically with the optional battery backup Security High-performance electronic detection system based on a high density matrix of infrared beams preventing unauthorized use Fast double swing doors for immediate lane closure Electromechanical locking to withstand forced entry attempts Audio and visual signals to...

The role of batteries in producing emergency power supply for industries is vital. Inform Elektronik A.Ş. enclosures are configured to meet the need of all types of applications. Designed according to the specific UPS model for easy connections, correct recharge current and appropriate discharge rating to optimize battery life.

UltraMax 12v 22Ah Sealed Lead-Acid High Capacity Deep Cycle Battery. It is an excellent 18 hole battery for use with Powakaddy, Hillbilly® Motocaddy®, Mocad®, Topcart®, Taxi® and many others with the same case size. Can also be used on Wheel chairs, Lawn Mowers, Toy Cars, Lifts etc. Replaces Yuasa NPC17-12, Yuasa TEV12180, TEV12210, YPC22-12, Ultramax NP20-12 (standby use only), and NP18-12B. Please Note: This battery does not come with connecting leads for your Mocad / Hill Billy Trolley. It is a simple operation to take the leads from your existing Mocad battery and fit them to your new battery, although we can supply the leads if required. Dimensions: L(mm) W(mm) H(mm) 181 76 167 Product Code : SLAUMXNP22-12

Battery HMK-2-200 specifications: - Rated voltage: 2V; - Rated capacity: 200 Ah; - Dimensions (LxWxH), mm: 173x111x329; - Weight: 12,5 kg; - Technology: AGM; - Battery Type: Sealed Lead Acid; - Terminal type: M8 (terminal diameter of 20 mm for a bolt of 5 mm); - Design Life: 15 years. HMK series batteries are lead-acid, sealed, maintenance-free with a rated voltage of 2 V. HMK are manufactured using AGM technology (electrolyte absorbed in a fiberglass separator). Thanks to this technology, batteries do not require topping up distillate through entire service life. High energy density HMK series recommended for use in uninterruptible power systems, safety and emergency lighting, communications equipment and other equipment requiring long battery backup time without additional charge.

Online UPS SIPB1KA.9-11 of double conversion with a total capacity of 1000 VA and built-in batteries. The output power factor is 0.9. Possibility of installation in a rack or on a floor, height in a rack 2U. Connect additional batteries to increase backup time. Internal slot for installing an SNMP card. Connection: - 0.9 power factor output provides high power density - A large number of output sockets, for models 3000 VA an additional outlet of high power - Sinusoidal output voltage in all operating modes and zero switching time to batteries - Increase backup time by connecting external battery packs - Automatic switching on equipment during restoration of the power supply network - Cold start - turn on the UPS when there is no input utility power - Outlet group management, priority power for critical equipment - Models with increased charge current are available for connecting large capacity battery packs

Оnline UPS SIPB3BA.9-11 double-conversion with output power capacity 3000 VA with built-in batteries and ability to connect external battery packs. Output power factor 0,9. Internal slot for SNMP card installation. Connection - Output power factor 0,9 provides high power density - A large number of output sockets, for models 3000 VA an additional outlet of high power - Sinusoidal waveform (sine wave) type of output voltage in all modes of operation and zero transfer time to battery Increase backup time by connecting external battery packs - Automatic switching on the equipment when the power supply is restored - Cold start - UPS can start work powered by battery pack when power utility is not available - Outlet group management, priority power for critical equipment Control Informative LCD display with additional LED indication Integrated interface ports USB and RS-232 Internal slot for management card installation: SNMP, Modbus or dry contact

We work closely with Astra Telematics (https://gps-telematics.co.uk/), leading company with almost 20 years of experience in M2M2/IoT telematics business. Main features of integrated devices: ARM Cortex M3 processor uBlox EVA-M8M GNSS, supporting GPS, Glonass, Galileo, BeiDou uBlox SARA-U201 UMTS/HSPA penta-band modem 3G/GPRS Internal or external antennas 3 axis accelerometer 2-8G 1 CAN-BUS / FMS 2.0 / OBD2 interface 2 RS-232 serial ports 2 analog inputs 4 pull-up optocoupled digital inputs 2 pull-down digital inputs 5 optocoupled digital outputs Modular firmware and over-the-air update capabilities Low power consumption Internal backup battery

T1 is compatible with many optional accessories including FMS Canbus, J1708 Bus, OBD, temperature sensor, RFID reader, door sensor, fuel level sensor, relay for blocking engine. T1 also has optional backup battery up to 1000 mAh. The device may operate 18 hours autonomously in normal mode. The device supports both online and offline working modes. In case of loosing GSM connection T1 can store up to 2.000 records. Customers may also develop their own firmware using widely accepted Python language, Telit and Trio Mobil API’s. Using the feature rich API customers may access all inputs, outputs, GPS and GPRS functionalities. With these features T1 becomes the most flexible vehicle tracking platform.

Cabinet dimensions are 70,130,100 Its weight is 165 kg excluding batteries, with the carrying apparatus. 1.5 mm thick galvanized sheet, while the other parts are made of 1 mm thick galvanized sheet. • Electrostatic powder paint RAL 7035 color code 3-point security system. • The stopper 3 shelves, each of which carries 4 12 volt batteries of 34 kg. Each shelf has a carrying capacity of 136 kg with 4 batteries. With 12 batteries that can be placed in 3 racks, the total weight of the battery reaches 408 kg, the total weight of the cabinet with the batteries reaches 573 kg. • The gases emitted by means of a hose. • An air conditioner 1,000 Watts is used in hot weather conditions. • 2 fans are used for Free Cooling in cool outdoor weather conditions. The fans filter the air from the lower part of the cabin and provide a cool air condition in the cabin with circulation through the louvered holes in the upper part.