Results for
FLÄKTCOMP SWEDEN AB
Sweden
Axial fans are a type of fan that creates airflow through a fan wheel that rotates around an axis and moves the air parallel to the axis. Axial fans can also be called propeller fans and are usually delivered as a complete unit consisting of fan wheel, motor and cover. Typically axial fans are direct driven with the impeller mounted on the motor shaft. There are also other designs such as e.g. belt-driven or with shaft bearing and coupling. The axial fan’s strength is to transport large volume flows at low pressures. At higher pressures, a centrifugal fan may be a better choice. To reach higher pressures with axial fans, these can be connected in series. Usually, the efficiency of an axial fan is comparatively lower than that of a centrifugal fan. But by using guide rails, diffusers and other accessories, an axial fan can reach the same or higher efficiency. The flow of axial fans can be regulated with vane or damper or speed regulation.
Request for a quoteFLÄKTCOMP SWEDEN AB
Sweden
Sometimes spare parts are not enough and the entire fan (with or without motor) needs to be replaced. We can help you with all your existing fans. To make the exchange as accurate as possible, we want as much information as possible about e.g. operational data and media. A good start is usually to use the rating plate on your existing fan.
Request for a quoteFLÄKTCOMP SWEDEN AB
Sweden
Safe transport of explosive, highly corrosive, toxic or harmful substances is important in many processes and it is often extremely important to prevent these substances from escaping into the environment. Here, FläktComp Sweden can contribute with high-quality fans that ensure that the gas is handled correctly and safely over time. We have extensive experience in supplying gas-tight fans in various designs for a variety of applications. Sealed fans have fan housings that can withstand large pressure differences and are equipped with high-quality shaft seals that prevent gas leakage. Often more demands are placed on the fan than just gas tightness. It is not uncommon for aggressive gases to be transported, which is why we also have extensive experience in offering special materials or advanced surface treatment methods for fan housings and impellers.
Request for a quoteFLÄKTCOMP SWEDEN AB
Sweden
A smoke fan is a fan whose task is to operate under extreme heat conditions, usually in the event of a fire. Smoke fans are a very important part of many of today’s safety systems in tunnels and buildings. There are a variety of standards that smoke fans are classified within, it can e.g. be F200 Classification for operation at 200° C for 2 hours F300 Classification for operation at 300° C for 2 hours F400 Classification for operation at 400° C for 2 hours Our many years of experience and large product range give our customers peace of mind. Development, design and manufacture of fans for smoke gas is done with the highest precision and with the highest quality materials. A smoke fan can be designed as an axial fan or impulse fan. To choose the right smoke fan, you should start from operating data and system design, as well as whether there are any special requirements.
Request for a quoteFLÄKTCOMP SWEDEN AB
Sweden
A flue gas fan is a fan that usually has the task of extracting flue gases from an industrial application, e.g. a melting furnace or pan. Flue gas fans are almost exclusively radial fans and transport not only clean air but also flue gases up to 550° C continuously. Flue gas fans are often a very important component in an industrial system. Our many years of experience and large product range give our customers peace of mind. Development. design and manufacture of fans for flue gas takes place with the highest precision and with the highest quality materials. In order to choose the right flue gas fan, one should start from operating data and system design, as well as whether there are any special requirements.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
FLÄKTCOMP SWEDEN AB
Sweden
A roof fan can be the same name referring to two different types of fans. On the one hand, it is the classic fan that is mounted indoors in homes and spins around to create an air flow in a room (these are also called HVLS fans (High-Volume Low-Speed)). And partly it is the type of fans that we work with – i.e. fans that are mounted outdoors on roofs belonging to e.g. apartment buildings, schools or industrial premises. A roof fan is a fan that is part of the ventilation system and has the task of extracting hot air, moisture and pollution from the indoor space and blowing them outside. The fans are usually designed to be robust and weather resistant as they are mounted on the roof. Of course, there are a variety of material designs adapted to the application needs.
Request for a quoteFLÄKTCOMP SWEDEN AB
Sweden
Renewable energy sources are something that is becoming more relevant every day. Biogas is an alternative and here FläktComp Sweden can contribute with high-quality fans that ensure that the biogas is handled correctly. Biogas fans are a type of gas-tight radial fan, adapted for use in biogas environments where the demands on materials and performance are very high. The fans are usually delivered as a complete unit consisting of fan wheel, motor, cover and vibration feet. In order to choose the right biogas fan, one should start from operating data and process design, as well as whether there are any special requirements.
Request for a quoteFLÄKTCOMP SWEDEN AB
Sweden
ATEX fans are fans that are installed in environments where there is a risk that an explosive atmosphere can form. Therefore, these fans need to be designed according to the ATEX directives. Depending on the classification of the environment, internal solutions inside the fan, such as e.g. spark protection in the fan cover or non-sparking materials. While in other cases, EX-rated motors are also required. Explosive gases require special fans. Our factories are certified according to ATEX for the manufacture of fans for Zone 1 and 2 as well as for Zone 21 and 22 containing dust. The design, production and use of fans for explosive media or environment is clearly specified in Europe by standardized directives. To choose the right ATEX fan, one should start from operating data and process design, as well as whether there are any special requirements.
Request for a quoteMETMANN
Spain
High flow wall fans for extraction and/or ventilation This type of fans provide significant air flows for the extraction and/or ventilation of industrial, livestock or agricultural premises. Main features - Air flow from 21,000 m3/h to 39,800 m3/h - Structure and overpressure slats in galvanized steel to avoid premature corrosion. - Propellers made of AISI 430 BA stainless steel. - High quality bearings. - IP-55 three-phase electric motor - V-belts. - Transmission pulleys made of magnesium aluminum. - Engine support with tensioner. - Side inserts for easy transport.
Request for a quoteLMT SRL LUX
Italy
Serie LEVANTE WALL EXHAUST AXIAL FANS Wall-mounted exhaust fan with axial aspiration. Supplied with dowels for wall installation. Anti-static finish that provides protection from dust and dirt. The kit is available for installation on windows.
Request for a quoteSEPA EUROPE GMBH
Germany
Based on the axial fan series MFB60B that has been extremely successful for many years on the market, SEPA EUROPE is now presenting a powerful upgrade with its PLB60B series. The fans of the PLB60B series, with the dimensions 60x60x15 mm have an optimized blade geometry that enables a maximum flow rate of 28 m³/h. The new SEPA fans set new standards in their class and are suitable for reliable CPU cooling in a broad range of applications. The robust ball bearing system guarantees a long service life of 70.000 h L10 and 550.000 h MTBF at 40 °C and ensures a safe and smooth operation over many years. The fail-safe axial fans are available in the operating voltages 5, 12 and 24. A PWM input with which the speed can be adjusted according to requirements is an available option.
Request for a quoteLMT SRL LUX
Italy
Serie LPE HELICAL FANS FOR WALL The LPE serie’s fans, present constructive characteristics that allow both the utilization in the industrial applications and the installations in the tertiary environments (workshops, stores, breedings, glasshouses) where there is the real necessity of the employment of a fan with easy installation, low consumptions, and reduced noise pressure levels.
Request for a quotePROKTES
Turkey
manufacturer of all types of roof mounted axial fans
Request for a quoteResults for
Axial flow fan - Import exportNumber of results
15 ProductsCompany type