Results for
KVM-TEC ELECTRONIC GMBH
Austria
masterEASY dual is a highly optimized KVM Extender over IP for distances up to 160km/99mi at a resolution of 1920x1200@60Hz and is available in Fiber. masterEASY convinces with an ultra flat housing - 4 dual in 1RU, embedded sound included and the KVM Extender over IP is compatible with standard network components. The perfect video compression enables the low latency <5ms and therefore a delay-free transmission. USB and video are transmitted via a fiber cable. The in-house development of USB 2.0 transparent is extremely flexible and supports USB devices like tablets, touch screens, sound modules, printers. The USB upgrade supports USB sticks and USB hard drives. The kvm-tec feature "USB save" prevents the intrusion of viruses via the USB interface by deactivating mass storage devices. USB memory upgrade is pre-installed and can be activated. Feature - Freeze last image - in case of a signal failure the last saved image is displayed in a red frame.
Request for a quoteKVM-TEC ELECTRONIC GMBH
Austria
The highly optimized Dual KVM Extender over IP has a range of 150m/492ft at a resolution of 1920x1200 @60 Hz and is available infiber as dual version. For point to point or in Matrix Switching Systems up to 1000 endpoints The perfect tuning of kvm-tec video compression with a low latency time enables a delay-free transmission of the signals. USB and video is transmitted via fiber cable. Due to the DVI extension Full HD videos can be transmitted in real time. USB memory, sound, RS232, analog VGA- as DVI transfer are already included. With the included switching upgrade up to 1000 endpoints, the MAXflex Extender can be integrated into a matrix switching system up to 1000 endpoints in conjunction with a standard network switch. kvm-tec Switching Manager - the intelligent software enables convenient management and intuitive operation of KVM extenders in the switching system. A Windows PC or Tablet with network interface is required for commissioning and operating the software.
Request for a quoteKVM-TEC ELECTRONIC GMBH
Austria
The Industryline Extender over IP is the reliable and robust solution for 24/7 operation in industry. Power, Ground & Shield are separated. The Industryline Extender can be operated directly in 24 Volt networks. The highly optimized KVM Extender has a range of 160km/99 mi at a resolution of 1920x1200 @60 Hz and is available in fiber as single version. The perfect tuning of kvm-tec video compression with a low latency allows a delay-free transmission of the signals. USB and video is transmitted via a duplex multimode fiber cable (LC). With DVI extension without loss of quality, Full HD videos can be transmitted in real time. The transparent USB 2.0 interface already supports tablets and touch screens, sound modules, printers and much more in the standard version. USB upgrade is available for memory sticks and USB hard drives. High reliability and robust design make the low-cost kvm-tec extender ideal for many applications.
Request for a quoteKVM-TEC ELECTRONIC GMBH
Austria
The highly optimized KVM Extender over IP has a range of 500m/1640ft (with SFP up to 160 km/99mi) at a resolution of 1920x1200 @ 60 Hz and is available in fiber as dual version. The perfect tuning of kvm-tec video compression with a low latency time enables a delay-free transmission of the Signals. USB and video are transmitted via two duplex multimode (LC) fiber cables. With DVI extension without loss of quality, Full HD videos can be transmitted in real time. The transparent USB 2.0 interface already supports tablets and touch screens, sound modules, printers and much more in the standard version.USB upgrade is available for memory sticks and USB hard drives. High reliability and robust design make the low-cost kvm-tec Extender ideal for many applications. The kvm-tec feature "USB save" prevents the intrusion of viruses via the USB interface by deactivating mass storage devices.
Request for a quoteKVM-TEC ELECTRONIC GMBH
Austria
The highly optimized KVM Extender over IP has a range of 500m/1640 ft. (SFP up to 160km/99mi) at a resolution of 1920x1200 @60 Hz and is available in fiber as single version. The perfect tuning of kvm-tec video compression with a low latency time enables a delay-free transmission of the signals. USB and video is transmitted via a duplex multimode fiber cable (LC). With DVI extension without loss of quality Full HD videos can be transmitted in real time. The transparent USB 2.0 interface already supports tablets and touch screens, sound modules, printers and much more in the standard version. USB upgrade is available for memory sticks and USB hard drives. High reliability and robust design make the low-cost kvm-tec extender ideal for many applications. The kvm-tec feature "USB save" prevents the intrusion of viruses via the USB interface by deactivating mass storage devices.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
KVM-TEC ELECTRONIC GMBH
Austria
MASTERflex dual is a highly optimized KVM Extender over IP and covers a range of 160km/99mi at a resolution of 1920x1200@60Hz and is available in fiber as dual version The perfect tuning of kvm-tec video compression with a low latency allows signals to be transmitted without delay. USB and video are transmitted via fiber cable. The in-house developed transparent USB 2.0 interface supports supports USB devices like tablets, touch sceens, sound modules, printers. The USB upgrade supports USB sticks and USB hard drives. The kvm-tec „USB save“ function prevents virus intrusion via the USB interface by disabling mass storage devices. Sound analog, VGA and USB memory upgrade are preinstalled and unlockable
Request for a quoteMEDEK & SCHÖRNER GMBH
Austria
Our innovative design allows us to deliver a complete laser solution to our customers – not just a laser source. The system includes a class 1 safety enclosure with a sliding cover and a special design cable guiding system. Compliance with the laser protection class 1 is guaranteed during laser marking. High quality marks Low maintenance Superior performance and reliability STANDARD CONFIGURATION Ytterbium (Yb) pulsed fiber laser unit consisting of supply unit and marking unit, integrated in a Laser Class 1 safety enclosure. BOFA - Exhauster for environmentally sustainable production. The exhaust unit prevents the evaporating material from causing health hazards for the operator, but also from damaging of the focusing lens. The exhaust unit can be connected directly to the protection device and comes with various filter grades.
Request for a quoteMEDEK & SCHÖRNER GMBH
Austria
Special high speed adapted ink jet printer with finely adjustable printhead support for marking bandmarks from one side on the fiber at speeds up to 1150 m/min. The usual arrangement allows bandmarking in line with the ink coating process, providing irradiator units after the ink jet printhead and the ink applicator. In case that no additional UV lamp unit and only the UV lamp of the UV curing unit CCD1-K unit is available, bandmarking has to be done in a separate process (either bandmarking or ink coating). The microprogram of the ink jet printer is specially adapted for ultra high speed bandmarking with automatic control of a constant bandwidth over the full speed range. Bandmark pitch and interband distance for multiple bandmarks (double, triple, etc.) are easily programmable on the computer screen. LD - INK LEVEL SENSOR AND INDICATOR SYSTEM FOR INK TANKS Triggers a warning signal as the ink level drops below minimum.
Request for a quoteMEDEK & SCHÖRNER GMBH
Austria
The FRP 05 equipment has been designed to produce optical fiber ribbons up to 12 (max. 24) fibers. The operating is simple and the equipment is multi-various (various pay-off and take-up reels, fiber tension measuring, software-update, options, accessories etc.). High speed ribbon processing Production of multi-fiber elements (CFU) Operational speeds up to 1000 m / min Processing of up to 12 (max. 24) fibers Modular designThe system basically comprises five main components whose frames have been designed for later installation of various options. This allows the machine to be upgraded at moderate cost as the need arises, e.g. for ring marking, higher UV curing performance, etc. FEATURES Ribbon production speed up to 1000 m/min including high precision ribbon printing Inline coloring in one single step with ribbon/CFU production Compact fiber bundles with UV-coating multi-layer structure Flexible ribbon with 200 µm fiber
Request for a quoteMEDEK & SCHÖRNER GMBH
Austria
Multifiber coating and curing system for up to 12 optical fibers for inline operation Inline color coating and UV curing Coloring and UV curing up to 300 m / min Simultaneous coating of up to 12 fibersSuited for use in multifiber production lines operating at a maximum production speed of 300 m / minute and above. Coating unit with fiber entry guides, dust blower, and coating heads. Curing unit with one irradiator type M550, control electronics, cooling fan, and nitrogen flooding system including a nitrogen supply unit. FEATURES Simultaneous coating of up to 12 optical fibers. UV curing unit with one M&S designed irradiator. Suitable for production speeds of up to 300 m / min and above. Electrical heating system for coating heads. Pressure system for ink tanks.
Request for a quoteMEDEK & SCHÖRNER GMBH
Austria
MODULAR CONSTRUCTION The system comprises five main components whose frames have been designed for later installation of various options. This allows the machine to be upgraded at moderate cost as the need arises, e.g., for ring marking, higher UV curing performance, etc. MAIN COMPONENTS TPO1-K Autotraversing Pay-off Unit CCD1-K Coloring and UV curing Station Ink supply system, high-speed coating head, and high performance M550 UV irradiator unit mounted on a common frame. UVM1-K Second coloring and UV curing Station for speeds up to 3000 m /min TUD1-K Take-up High-speed capstan and take-up system with separate control cabinet. PCI1-K Control Unit FEATURES Fiber tension sensors ensure optimized fiber tension control. Automatic reel size detection makes it extremely easy for the operator to adjust the traversing system New M550 UV irradiator with control system that constantly measures the irradiator power and automatically adjusts the power
Request for a quoteMEDEK & SCHÖRNER GMBH
Austria
The system comprises three main components that can be equipped and extended with up to six processing units. This means that up to six fibers can be coated simultaneously and independently. MAIN COMPONENTS TPO-L Autotraversing Pay-off Unit CCD-L Coloring and UV curing Station Ink supply system, high-speed coating head, and high performance M550 UV irradiator unit mounted on a common frame. TUD-L Take-up High-speed capstan and take-up system with separate control cabinet. PCI-L Control Unit FEATURES Fiber tension sensors ensure optimized fiber tension control. Automatic reel size detection makes it extremely easy for the operator to adjust the traversing system. New M550 UV irradiator with control system that constantly measures the irradiator power and automatically adjusts the power output to match the fiber speed. This ensures optimum irradiator efficiency and prevents thermal overloading of the fiber at slow speeds or at standstill.
Request for a quoteKUBATOR GMBH
Austria
We produce in Austria. A single-mode optical fiber with a low water peak (G657A1/G652D) hybrid with advanced characteristics is a fiber with a reduced sensitivity to bends. The fiber is produced by vapor axial deposition method (VAD) with a quartz core alloyed with Germanium. It completely complies with the requirements of ITU-T G.652d and exceeds ITU-T G.657A1 parameters of macrobend loss and attenuation. Double acrylic coating provides it´s high strength and long service life. The fiber works in a full spectral range of different access networks, including FTTH, and can be applied in long-distance communications. Fiber-bending resistance and improved attenuation parameters give an advantage in the application for residential networks. The quality control system of the factory confirms plug compatibility with fiber (G652d) as well as with all on the market available SMF fibers.
Request for a quoteKUBATOR GMBH
Austria
We produce in Austria. NBG´s low water peak optical fiber “G652d” is a single-mode fiber produced by vapor axial deposition method (VAD). The fiber with a quartz core alloyed with Germanium and quartz cladding complies with the recommendations ITU-T G.652d. The fiber’s dual acrylate coating ensures its high strength, structural integrity and long service life. The fiber works in a full spectral range of different access networks including FTTH and can be applied in long distance communications. The G652d fiber shows reliable results of weldability with most available on the market SMF fibers. Fiber quality’s compliance with international standards is confirmed.
Request for a quoteResults for
Fiber - Import exportNumber of results
15 ProductsCompany type