Seals - Import export

Load capacity: Class A (15kN test load) EN 124 Materials: Frame in extruded aluminium. Cover in extruded aluminium bonded to a composite aluminium honeycomb panel (with a white coating). Stainless steel screw connections. EPDM sealing Features: Modern lightweight-construction access cover. Major weight-savings compared to concrete-filled access covers. Opening the light cover couldn’t be easier. As the cover is not filled with concrete, installation is quicker and simpler. There is a recess of 24mm for laying slabs, tiles, parquet etc. In the case of thin tiles, the difference in height can be compensated for by using a suitable tile adhesive (MAPEI Keralastic) and waterproof building board. Sealed design with a very high-quality finish. Very attractive surface, particularly the visible edges. Inconspicuous corner joints make it easy to connect tiles, slabs etc. Opening with the Lift-Off System: As a cover inside buildings (pedestrian traffic only), which can be opened by 1-2...

Load capacity: 125 kN test load EN 124 Material: Frame and cover in 2 mm cold-formed precision steel profiles. Hot-dip galvanised. Features: Accurately manufactured sealed access covers. Tapered design allows easy opening. Virtually invisible when installed. EPDM seal. Robust steel mesh reinforcement. The Lift-Off opening system: Every HAGODECK Type BV steel cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. Applications: Inside buildings or their surroundings, where sealed covers are required. Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding flooring. Cover depth ≈ 5.0 cm Installation height ≈ 7.5 cm Special sizes possible *S = available from stock *O = to order

Load capacity: 125 kN test load EN 124. Material: Frame and cover in 2 mm cold-formed precision steel profiles. Hot-dip galvanised. Insulated version, consisting of: Z-brackets, EPDM seal, polyurethane rigid foam insulation panel coated with aluminium on both sides. Thermal resistance = 3.2 m2 K/W Thermal coefficient 0.3 W/m2 K (=RC Warde) Features: Sealed cover with inlaid insulation panel. Tapered design allows easy opening. Virtually invisible when installed. Robust steel mesh reinforcement. The Lift-Off opening system: Every HAGODECK Type BV thermo cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. Applications: For areas inside buildings where a cover with insulation properties is required. Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding...

Load capacity: 15 kN test load EN 124. Material: Frame made of 2 mm cold formed precision steel profiles. Hot dip galvanised. Durbar-plate cover. Features: Sealed cover, flat design. EPDM seal. Opening tool included. Applications: For pedestrian use inside buildings and their surroundings, particularly for inspection chambers. Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding flooring. Installation height ≈ 6 cm Special sizes possible *S = available from stock *O = to order

Load capacity: 15 kN test load EN 124. Material: Frame made of aluminium extruded sections. Cover made of 3/5 mm aluminium chequerplate. Aluminium reinforcement to the underside. Stainless steel screws. Features: Sealed cover. EPDM seal. Completely rust-proof. Light weight. Opening tool included. Applications: For pedestrian use inside buildings and their surroundings, particularly where corrosion-resistance and/or low weight are of great advantage. Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding flooring. Installation height ≈ 3.5 cm Total height including reinforcement of bottom ≈ 7 cm Special sizes possible *S = available from stock *O = to order

Load capacity: 125 kN test load EN 124. Material: Grade 304 stainless steel. Passivated after welding. Also available in grade 316 stainless steel on request (no stock item). Features: Accurately manufactured fully sealed access covers. Tapered design allows easy opening. Virtually invisible when installed. EPDM seal. The Lift-Off opening system: Every HAGODECK Type BVE stainless steel cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. Applications: Inside buildings or their surroundings, where exceptionally high standards are needed or where the hygienic properties of stainless steel are preferred, e.g. in the food industry, in meat-processing areas, dairies, hospitals, swimming pools. For indoor swimming pools only use grade 316 material! Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal...

Load capacity: 125 kN test load EN 124 Material: Frame and cover in 2 mm cold-formed precision steel profiles. Hot-dip galvanised. Features: Standard version (not sealed). Type B should only be used where the “sealed” characteristic is not required. Tapered design allows easy opening. Virtually invisible when installed. Robust steel mesh reinforcement, crosswise welded. Opening: Every HAGODECK Type B steel cover comes with a set of lifting keys and precise installation instructions. Applications: Inside buildings over sealed inspection fittings or installations where a fully sealed cover is not needed. Installation: Installation must be carried out according to our instructions.

Load capacity: Class A (15kN test load) EN 124 Materials: Frame in extruded aluminium. Cover in extruded aluminium bonded to a composite aluminium honeycomb panel (with a white coating). Stainless steel screw connections. EPDM seal Features: modern lightweight-construction access cover. Major weight-savings compared to concrete-filled access covers. The cover is lifted by the hinge, significantly reducing the effort required. A safety device is fitted, locking the cover in the raised position. As the cover is not filled with concrete, installation is quicker and simpler. There is a recess of 24mm for laying slabs, tiles, parquet etc. In the case of thin tiles, the difference in height can be compensated for by using a suitable tile adhesive (MAPEI Keralastic) and waterproof building board. Sealed design with a very high-quality finish. Very attractive surface, particularly the visible edges. Inconspicuous corner joints make it easy to connect tiles, slabs etc. Opening with the...

LOAD CAPACITY: 125 kN test load EN 124. MATERIAL: Frame and cover sections in extruded aluminium. Stainless steel screws. FEATURES: Sealed access cover in high-quality finish. Very attractive surface, the visible edges are particularly attractive. Therefore these covers are particularly suitable where a look of elegance is required. Very easy-to-open design. Robust corner joints guarantee a very high degree of rigidity and make it easier to lay tiles and ceramic finishes. EPDM seal. The cover is reinforced with a clamped steel mesh reinforcement. THE LIFT-OFF OPENING SYSTEM: Every HAGODECK Type BVA alu cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. APPLICATIONS: Inside buildings where it is important to obtain a nice visual effect. Also, in places where floor finishes may need polishing after fixing or where particular attention needs to be given to corrosion...

The corrugated board industry traditionally relies on corn starch and wheat starch. AGRANA corn and wheat starches are characterised by excellent adhesion and rapid initial tack, which is particularly important at high machine operating speeds.

This house lead-in prevents the movement of the cable laid in the channel and at the same time the penetration of sludge, water, gas and rodents is prevented. It is quick and easy to install, and inflates – without the aid of other aids – by pulling out the release band (see assembly instructions in the download area).