Cleaning wipes - Import export

The optical cleaner with dirt-repellent effect. This handy, easy to use product cleverly combines the cleaning solution SILKY LIQUIDE in a small pump-action bottle and a SILKY WIPE cloth for polishing. Even everyday items in constant use such as mobile telephones, Blackberries and PDA’s retain a clear, un-smudged surface thanks to the dirt repellent effect of the special cleaning liquid. Grease and sweat are easily wiped off. Silky Liquid– Innovation from GREEN CLEAN for fine Technics Features. Careful cleaning and long-lasting surface protection SILKY LIQUIDE is fast acting lifts dirt and simultaneously smoothes the surface structure leaves the surface dirt-repellent facilitates easier follow-up cleaning leaves a noticeably smoothens surface no effect on spectral light transmission causes no aberrations or distortions Antistatic surface effect Surface coatings are not affected Non-Flammable and Bio-degradable Silky Wipe– tried and tested for years in photography and...

Polyester / Cellulose, 23 x 23 cm, 100 pcs in dispenser bag Anti-static Very soft cloth quality with firm structure Especially tear proof, both when wet or dry Extremely good polishing quality No loss of fibres; no abrasion No chemical bonding agents Resistant to solvents, decay, mould

The GREEN CLEAN – Silky Wipe cleaning cloth is a silk derivative cloth that is effective for safely cleaning TFT LCD LED & plasma panel TV’s, monitors, mobile display, tablet pc`s and other electronic devices. These special cloth is also effective for cleaning lenses, optics & glasses. Silky Wipe is made from a particularly flat, tightly spun silk derivative and contains no chemical binding materials or bleach. To be used dry or with liquid. The quality of the cloth is therefore very soft, yet has the slow absorption qualities necessary to make this particular cleaning process so effective. SILKY WIPE washable at 30° extremely good polishing quality individual sealed 25 x 25 cm / 9,84 x 9,84 inch no microfibre GREEN CLEAN – “Silky Wipe” for: Lenses – Optics – Touch Phones – GPS / navigation device – Photo Frames – LCD/LED/Plasma TV´s – Tablet PC´s

GREEN CLEAN “SILKY WIPE” consists of smooth, tightly spun silk derivative / cotton yarns, without chemical binders or bleach. best polishing properties individually welded 10 x 10 cm no microfiber washable at 30° Do not use a dryer or plasticizer!

Green Clean – Cleaning Kit for: FOTO – LENS – VIDEO – DIGITAL – COMPUTER – LAPTOP – AUDIO – HOBBY easy for travelling multi purpose use long lasting anti static Blue Booster: The GREEN CLEAN – BLUE BOOSTER for extra strong air flow! It removes dust particles from all surfaces such as lenses and more. Vario Brush: The GREEN CLEAN – VARIO BRUSH (Goat hair) is particularly soft and adjustable in two positions. Position one: 19 mm = firm Position two: 34 mm = soft Anti-static effect the brush is retractable and therefore protected inside the handle. The brush is retractable and therefore protected inside the handle. Washable with baby shampoo and lukewarm water. Optic Fluid: The GREEN CLEAN – OPTIC FLUID (30ml) is for excellent and effective cleaning, without any alcohol or aggressive agents that could dissolve materials. Biologically safe. Silky Wipe: The GREEN CLEAN – SILKY WIPE is made from particularly flat, tightly spun silk-derivate and contains no chemicals, binding...

„1 for 3“ Screen Cleaner Screen Cleaner – antistatic Cleaning spray for the plastic, glass and metal surfaces of computer equipment (PC housing, screens, printer, fax etc.). Before use, read the equipment manufacturer’s cleaning information. How to use: • Switch off the equipment before starting to clean (remove mains plug) and allow it to cool down. • Spray the liquid onto a Cleaning-Wipe from a short distance. • Clean the surface and rub until dry, polished and free of streaks. Always read the label and product information before use. Caution: Keep out of the reach of children. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. If swallowed, seek medical advice immediately and show this container or label.

„1 for 3“ Screen Cleaner Screen Cleaner – antistatic Cleaning spray for the plastic, glass and metal surfaces of computer equipment (PC housing, screens, printer, fax etc.). Before use, read the equipment manufacturer’s cleaning information. How to use: • Switch off the equipment before starting to clean (remove mains plug) and allow it to cool down. • Spray the liquid onto a Cleaning-Wipe from a short distance. • Clean the surface and rub until dry, polished and free of streaks. Always read the label and product information before use. Caution: Keep out of the reach of children. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. If swallowed, seek medical advice immediately and show this container or label. 0,25 g Alkylethylbenzyldimethylammoniumchlorid, 0,25 g Didecyldimethylammoniumchlorid, Methylisothiazolinone, Iodopropynyl Butylcarbamate, enthält weniger als 5 % kationische Tenside

„1 for 3“ Screen Cleaner Screen Cleaner – antistatic Cleaning spray for the plastic, glass and metal surfaces of computer equipment (PC housing, screens, printer, fax etc.). Before use, read the equipment manufacturer’s cleaning information. How to use: • Switch off the equipment before starting to clean (remove mains plug) and allow it to cool down. • Spray the liquid onto a Cleaning-Wipe from a short distance. • Clean the surface and rub until dry, polished and free of streaks. Always read the label and product information before use. Caution: Keep out of the reach of children. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. If swallowed, seek medical advice immediately and show this container or label.

Disinfectant cleaning wipe (wet) for the plastic, glass and metal surfaces of computer equipment (PC housing, screens, printer, fax etc.). Before use, read the equipment manufacturer‘s cleaning information. How to use:  Switch off the equipment before starting to clean (remove mains plug) and allow it to cool down.  Clean the surface and rub until dry, polished and free of streaks.  Use biocides safely. Always read the label and product information before use. Caution: Keep out of the reach of children. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. If swallowed, seek medical advice immediately and show this container or label. Do not empty into drains; dispose this material and its container at hazardous or special waste collection point. To disinfect, leave on for 1 minute, one cloth reaches for 30×30 cm. The disinfected surface can be used again once dry. Do not use the product once its use-by date has expired. Content: 10x Wet...

WET & DRY are pre-soaked, individually sealed applicators – manufactured under cleanroom requirements. Correct fluid content with Wet Foam Swab – an essential aspect of safe application. The special pre-treatment of our DRY SWEEPER guarantees stripe free cleaning! High standard requirements on choice of both material and manufacturing processes guarantee professional results! WET FOAM SWAB: Grime solvent Non-toxic Non-inflammable No over-dosage No spilling of solvent Dissolves grime smudges Safe handling DRY SWEEPER Used directly after Wet Foam application, in order to lift off the dissolved grime. The Silky Wipe is fixed with ultrasonic. smooth SILKY WIPE guarantees sensitive cleaning proceed thin spatula shape – accurate handling control streak-free, gentle cleaning double layer fabric – slides easy fluff-free supersoft microfiber – smooth edges cleanroom 100 vacuum sealed Importantly: Wet & Dry are available in two widths! Select the correct size, for full frame size senso

WET & DRY are pre-soaked, individually sealed applicators – manufactured under cleanroom requirements. Correct fluid content with Wet Foam Swab – an essential aspect of safe application. The special pre-treatment of our DRY SWEEPER guarantees stripe free cleaning! High standard requirements on choice of both material and manufacturing processes guarantee professional results! WET FOAM SWAB: Grime solvent Non-toxic Non-inflammable No over-dosage No spilling of solvent Dissolves grime smudges Safe handling DRY SWEEPER Used directly after Wet Foam application, in order to lift off the dissolved grime. The Silky Wipe is fixed with ultrasonic. smooth SILKY WIPE guarantees sensitive cleaning proceed thin spatula shape – accurate handling control streak-free, gentle cleaning double layer fabric – slides easy fluff-free supersoft microfiber – smooth edges cleanroom 100 vacuum sealed Importantly: Wet & Dry are available in two widths! Select the correct size, for full frame size senso

The DIGI BACK CLEANING KIT “PELI EDITION” bestehend aus: 1 Stk. Original PELI Case # 1150 with adapted interior for the items 1x G-2051 Air Power Hi-TECH PRO 400 ml 1x V-2100 Top Ventil with Anti Static Adapter 10x T-1010 Silky Wipe – 10cm x 10cm, individually welded 1x Green Clean Digital Capture Back Cleaning Liquid 15 ml The system offers a two part cleaning process to remove all types of dust, dirt and contamination: Part ONE: Contact-Free removal of dust and loose particles with anti-static effect. Part TWO: Safe removal of dirt and smudges with a specially formulated cleaning fluid and „Silky Wipe“ cloth. All digital capture sensors (CCD & CMOS) have sensitive surfaces which are best left un-touched and contact-free cleaning methods are best! Sensors have a current going through them when in use and that creates a static charge that attracts dust, fluff and abrasions. These are all easily removed by using STEP ONE of the ANTISTATIC SET: The basis for this is the Air Power...

WET & DRY are pre-soaked, individually sealed applicators – manufactured under cleanroom requirements. Correct fluid content with Wet Foam Swab – an essential aspect of safe application. The special pre-treatment of our DRY SWEEPER guarantees stripe free cleaning! High standard requirements on choice of both material and manufacturing processes guarantee professional results! WET FOAM SWAB: Grime solvent Non-toxic Non-inflammable No over-dosage No spilling of solvent Dissolves grime smudges Safe handling DRY SWEEPER Used directly after Wet Foam application, in order to lift off the dissolved grime. The Silky Wipe is fixed with ultrasonic. smooth SILKY WIPE guarantees sensitive cleaning proceed thin spatula shape – accurate handling control streak-free, gentle cleaning double layer fabric – slides easy fluff-free supersoft microfiber – smooth edges cleanroom 100 vacuum sealed Importantly: Wet & Dry are available in two widths! Select the correct size, for full frame size senso

WET & DRY are pre-soaked, individually sealed applicators – manufactured under cleanroom requirements. Correct fluid content with Wet Foam Swab – an essential aspect of safe application. The special pre-treatment of our DRY SWEEPER guarantees stripe free cleaning! High standard requirements on choice of both material and manufacturing processes guarantee professional results! WET FOAM SWAB: Grime solvent Non-toxic Non-inflammable No over-dosage No spilling of solvent Dissolves grime smudges Safe handling DRY SWEEPER Used directly after Wet Foam application, in order to lift off the dissolved grime. The Silky Wipe is fixed with ultrasonic. smooth SILKY WIPE guarantees sensitive cleaning proceed thin spatula shape – accurate handling control streak-free, gentle cleaning double layer fabric – slides easy fluff-free supersoft microfiber – smooth edges cleanroom 100 vacuum sealed Importantly: Wet & Dry are available in two widths! Select the correct size, for full frame size senso

Digi Back Cleaning Kit contains: 1x G-2051 Air Power Hi-TECH PRO 400 ml 1x V-2100 Top Ventil with Anti Static Adapter 10x T-1010 Silky Wipe – 10cm x 10cm, individually welded 1x Green Clean Digital Capture Back Cleaning Liquid 15 ml The system offers a two part cleaning process to remove all types of dust, dirt and contamination: Part ONE: Contact-Free removal of dust and loose particles with anti-static effect. Part TWO: Safe removal of dirt and smudges with a specially formulated cleaning fluid and „Silky Wipe“ cloth. All digital capture sensors (CCD & CMOS) have sensitive surfaces which are best left un-touched and contact-free cleaning methods are best! Sensors have a current going through them when in use and that creates a static charge that attracts dust, fluff and abrasions. These are all easily removed by using STEP ONE of the ANTISTATIC SET: The basis for this is the Air Power HI-TECH PRO 400ml aerosol can, fitted with a high quality „Top Ventil“ discharge valve and...