Results for
NEXTSENSE GMBH
Austria
ATON Wire is a stationary dimensional measurement system for continuous monitoring of rolling and drawing mill production. To meet challenging return-of-investment requirements NEXTSENSE offers high accuracy at a reasonable price. The ATON Wire gauges measure diameter and ovality of round profiles with a two-axes shadow sensor, a 50mm measurement range and an accuracy of 5 μm. Depending on the material temperature and environment conditions you can choose between three product versions. The measurement system offers an online display of the results. In the top line the Batch ID and the billet or coil counter of this batch is shown. In the next line the current value of the two axes and the calculated ovality value is shown numerically in big digits. Under each of these numbers several statistical values based on the current coil are shown: Maximum, Average, Minimum, Standard Deviation, Cp and CpK. System Versions: ATON Wire Cold, ATON Wire Warm, ATON Wire Hot
Request for a quoteNEXTSENSE GMBH
Austria
With the CALIPRI C14 wireless hand-held measuring device, you can evaluate gaps, edges and design lines with high accuracy and in seconds. The measurement is carried out using the patented Calipri principle - a further development of the laser light section method with automatic tilt and roll correction - which eliminates possible misalignment of the sensor. The user defines the position, evaluation strategy and tolerances of the individual measuring points. The measurement is then carried out with a swivelling movement of the sensor. The sensor records the contour from different perspectives - down to the depth of the gap or completely around a fold edge. The software then evaluates the gap dimension, the flush and the radii. The measured values are displayed on the tablet PC and sensor and compared with predefined limit values using a traffic light system. The measurement data can then be printed as a report or exported as a data record and transferred to existing databases.
Request for a quoteNEXTSENSE GMBH
Austria
CALIPRI C12 is a gap and flush measurement system that can be fully integrated into the line and is used for full checks of automobile bodies. The system can be used with standard industrial robots as well as HRC lightweight robots. By using CALIPRI C12 in your production line, you are relying on highly-precise measurement results without any mathematical approximation methods as well as globally unique automatic rotation and tilt correction. The patented CALIPRI measurement method is used here – a further development of the laser light section technology. The results from the automated measuring system can be compared with the data from the mobile gap measurement devices (CALIPRI C10/C14, CALIPRI C11/C15) due to cross-platform evaluation methods in order to detect deviations in the process and to derive appropriate measures from this.
Request for a quoteNEXTSENSE GMBH
Austria
The non-contact Calipri C42 measurement device with infrastructure measurement modules meets the rail industry's need for a simple profile gauge with user-independent results for complete track testing. CALIPRI stands for multifunctionality all along the line. The non-contact measuring technology allows the inspection of rail profile, switch profile and track geometry with one and the same measuring device. The patented CALIPRI principle automatically corrects user errors and thus leads to reproducible measurement results. The measuring system consists of a sensor and a tablet PC for defining the measuring sequence and entering limit values. Tolerances that are exceeded are indicated to the user by a traffic light system. The measurement data can then be printed or exported as a report.
Request for a quoteNEXTSENSE GMBH
Austria
The non-contact Calipri C4x series with rolling stock measurement modules meets the rail industry's need for a simple profile gauge with user-independent results for complete wheelset testing. CALIPRI stands for multifunctionality all along the line. The non-contact measuring technology allows the inspection of wheel profile, wheel diameter, brake disc and back-to-back distance with one and the same measuring device. The patented CALIPRI principle automatically corrects user errors and thus leads to reproducible measurement results. The measuring system consists of a sensor and a tablet PC for defining the measuring sequence and entering limit values. Tolerances that are exceeded are indicated to the user by a traffic light system. The measurement data can then be printed or exported as a report. Two versions are available: Calipri C42 for heavy rail vehicles and Calipri C41 for light rail vehicles.
Request for a quoteNEXTSENSE GMBH
Austria
Specially developed for the conditions in final assembly, the automated optical measuring system CALIPRI CB20 measures gap and flush with the highest precision and repeatability, even on poorly or excessively reflective surfaces. The key to this is the patented CaliBreezeTM technology, which uses a thin layer of condensed water to optimize the optical properties of different surfaces for measurement. After the measurement, which only takes a few seconds, the condensation layer disappears without residue. CALIPRI CB20 integrates two patented technologies: CaliBreezeTM technology and the Calipri principle. The latter is a technology renowned in the industry and already integrated in all other CALIPRI solutions from Nextsense. Thus, the cross-platform measurement specifications allow the comparison of the measurement data of all CALIPRI solutions, which simplifies the optimization of production processes.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Results for
Profiling - Import exportNumber of results
6 ProductsCountries
Company type