Energy systems - Import export

Would you like to produce clean electricity, flexibly, efficiently and profitably? Solarfold allows you to generate electricity where it’s needed - and where it pays to do so. The innovative and mobile solar container contains 200 PV modules with a maximum nominal power rating of 134 kWp, and can be extended with suitable energy storage systems. The lightweight, ecologically-friendly aluminium rail system guarantees a mobile solution with rapid availability.

The LxxxT-44 current sensor is a completely new development from GWP, which enables the advantages of sensor technology also for the low voltage area. The design is made for installation on low voltage cables either isolated or not isolated. It combines a wide range behaviour with low costs. The usage of correction factors enables even better corrections in combination with dedicated devices.

The LxxxR-32 current sensor is a completely new development from GWP, which enables the advantages of sensor technology also for the low voltage area. The design is fitting in existing common housings of CT´s, but with wide range behaviour and lower costs.

The NxxxE-0U current sensor is dedicated for installation on the cables of a gas or insulated switchgear in the primary or secondary energy distribution. The design is split able, which makes it able to put the sensor on an existing cable. Due to cost effective construction, the sensor has a very high cost-benefit ratio

The NxxxT-0U current sensor is dedicated for installation on the cables of a gas or insulated switchgear in the primary or secondary energy distribution. The design is split able, which makes it able to put the sensor on an existing cable. Due to cost effective construction, the sensor has a very high cost-benefit ratio.

The NxxxR-xx current sensor is dedicated for installation on the bushing of a gas insulated switchgear in the secondary energy distribution. The design is slim and the holding system can be adapted to different kind of T-connectors. Earthing could be done at the current sensor, or through the shielding of the cable or through the S2 connection inside the IED.

The A240P-5K voltage detector is a voltage sensor based on a capacitive divider principle. Inside the product there is a high stable capacitor, with a high capacitance and up to 15nF and up to 24kV insulation level. The product is dedicated for gas insulated switchgears and is used for asymmetric T-connectors from a range of different manufacturers.

The A240S-5K voltage detector is a voltage sensor based on a capacitive divider principle. Inside the product there is a high stable capacitor, with a high capacitance and up to 15nF and up to 24kV insulation level. The product is dedicated for air insulated switchgears and could be used also as support insulators with bending forces.

The voltage sensors of Type TxxxC-xx are commonly used in asymmetric T-connectors of different manufacturers. The T-connectors are usually closed with a dedicated blind plug of a T-connector manufacturer, this could be removed, and the sensor could be installed into this place. The sensor is than connected with the common earth and with the secondary connection cable to an IED. The product range -0U is especially made with maximum cost effectiveness by utilizing correction factors

The voltage sensors of Type TxxxC-0U are commonly used in T-connectors of different manufacturers. The Tconnectors ar usually closed with a Type C - Blindplug, this could be removed and the sensor could be installed into this place. The sensor is than connected with the common earth and with the secondary connection cable to an IED. The product range -0U is especially made with maximum cost effectiveness by utilizing correction factors.

The temperature sensor system is made for solving a big problem in switchgears. It is modular and can be used in cable compartments of gas insulated switchgears or even in air insulated switchgears, directly on the medium voltage busbars to monitor temperature rises, especially in busbar conjunction points. The system could be delivered with wired cost efficient solutions for low voltage applications or on medium voltage cables or completely galvanic separated with a Power over fiber connection from the base station to the temperature sensors directly attached to the primary busbar.

The K120A-xx is one of the newest developments from GWP. It is a combined voltage and current sensor in block type form factor dedicated for air insulated switchgears in the primary energy distribution. It contains a wide range current sensor and a voltage sensor, and it is even possible to put a 3rd component, a low power conventional current transformer inside to enable the maximum flexibility for the customer

The combined voltage and current sensors of Type K240F-xx are used in outdoor installations usually on poles. The sensor is connected with the common earth by the installation point of the product and with the secondary connection cable connected to an IED. It can resist all weather conditions and environmental changes due to the usage of silicon material, which is also used as standard materials for high voltage insulators.

The LxxxT-28 current sensor is a completely new development from GWP, which enables the advantages of sensor technology also for the low voltage area. The design is made for installation on low voltage cables either isolated or not isolated. It combines a wide range behaviour with low costs. The usage of correction factors enables even better corrections in combination with dedicated devices.

The voltage sensors of Type TxxxB-xx is dedicated to the new T-connector of Euromold/Nexans, called (K) (M)480TB. The T-connectors are usually closed with a dedicated blind plug of a T-connector manufacturer, this could be removed and the sensor could be installed into this place. The sensor is than connected with the common earth and with the secondary connection cable to an IED.

The LxxxR-21 current sensor is a completely new development from GWP, which enables the advantages of sensor technology also for the low voltage area. The design is fitting in existing common housings of CT´s, but with wide range behaviour and lower costs.

The NxxxT-xx current sensor is dedicated for installation on the cables of a gas or insulated switchgear in the primary or secondary energy distribution. The design is split able, which makes it able to put the sensor on an existing cable. Earthing could be done at the current sensor, or through the shielding of the cable or through the S2 connection inside the IED.

One of the latest developments of GWP is the ultra-wide range current sensor for the primary energy distribution. This product has an incomparable measurement range starting from 0,5A up to 100.000A with a defined accuracy. Primary use case is in combination with protection relays.

One of the latest developments of GWP is the ultra-wide range current sensor for the primary energy distribution. This product has an incomparable measurement range starting from 0,5A up to 100.000A with a defined accuracy. Primary use case is in combination with protection relays.

The NxxxE-xx current sensor is dedicated for installation on the cables of a gas or insulated switchgear in the primary or secondary energy distribution. The design is split able and divided into 3 separate rings, which makes it able to put the sensor on an existing cable. The rings makes it possible to install this product inside switchgears, where the pole distance of the phases can vary up to 1.5m.

The voltage sensors of Type T360Cxx is made for T-connectors with a Type C cone acc. IEC 50181. The Tconnectors are usually closed with a dedicated blind plug of a T-connector manufacturer, this could be removed, and the sensor could be installed into this place. The sensor is than connected with the common earth and with the secondary connection cable to an IED. This sensor is especially made for a insulation level of 36kV.

The A240F-16K is a high voltage coupling capacitance dedicated for Power-line-carrier communication. It is used in outdoor applications, usually on poles. Inside of the product is a big capacitance of over 10nF, which makes the communication through the network possible.

FX Universal Permanent Lifting Magnets In the standard design, the FX lifting magnets have a broad spectrum of applications. The FX has good results with a large air gap as well as with thin, flat and round materials. A feature of this product is its highly sturdy nature and a good price performance.