Results for
GREENWOOD-POWER
Austria
The NxxxT-xx current sensor is dedicated for installation on the cables of a gas or insulated switchgear in the primary or secondary energy distribution. The design is split able, which makes it able to put the sensor on an existing cable. Earthing could be done at the current sensor, or through the shielding of the cable or through the S2 connection inside the IED.
Request for a quoteGREENWOOD-POWER
Austria
The NxxxE-xx current sensor is dedicated for installation on the cables of a gas or insulated switchgear in the primary or secondary energy distribution. The design is split able and divided into 3 separate rings, which makes it able to put the sensor on an existing cable. The rings makes it possible to install this product inside switchgears, where the pole distance of the phases can vary up to 1.5m.
Request for a quoteGREENWOOD-POWER
Austria
The combined voltage and current sensors of Type K240F-xx are used in outdoor installations usually on poles. The sensor is connected with the common earth by the installation point of the product and with the secondary connection cable connected to an IED. It can resist all weather conditions and environmental changes due to the usage of silicon material, which is also used as standard materials for high voltage insulators.
Request for a quoteGREENWOOD-POWER
Austria
The NxxxT-0U current sensor is dedicated for installation on the cables of a gas or insulated switchgear in the primary or secondary energy distribution. The design is split able, which makes it able to put the sensor on an existing cable. Due to cost effective construction, the sensor has a very high cost-benefit ratio.
Request for a quoteGREENWOOD-POWER
Austria
The NxxxR-xx current sensor is dedicated for installation on the bushing of a gas insulated switchgear in the secondary energy distribution. The design is slim and the holding system can be adapted to different kind of T-connectors. Earthing could be done at the current sensor, or through the shielding of the cable or through the S2 connection inside the IED.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
GREENWOOD-POWER
Austria
The K120A-xx is one of the newest developments from GWP. It is a combined voltage and current sensor in block type form factor dedicated for air insulated switchgears in the primary energy distribution. It contains a wide range current sensor and a voltage sensor, and it is even possible to put a 3rd component, a low power conventional current transformer inside to enable the maximum flexibility for the customer
Request for a quoteGREENWOOD-POWER
Austria
One of the latest developments of GWP is the ultra-wide range current sensor for the primary energy distribution. This product has an incomparable measurement range starting from 0,5A up to 100.000A with a defined accuracy. Primary use case is in combination with protection relays.
Request for a quoteGREENWOOD-POWER
Austria
One of the latest developments of GWP is the ultra-wide range current sensor for the primary energy distribution. This product has an incomparable measurement range starting from 0,5A up to 100.000A with a defined accuracy. Primary use case is in combination with protection relays.
Request for a quoteGREENWOOD-POWER
Austria
The NxxxE-0U current sensor is dedicated for installation on the cables of a gas or insulated switchgear in the primary or secondary energy distribution. The design is split able, which makes it able to put the sensor on an existing cable. Due to cost effective construction, the sensor has a very high cost-benefit ratio
Request for a quoteGREENWOOD-POWER
Austria
The LxxxR-21 current sensor is a completely new development from GWP, which enables the advantages of sensor technology also for the low voltage area. The design is fitting in existing common housings of CT´s, but with wide range behaviour and lower costs.
Request for a quoteGREENWOOD-POWER
Austria
The LxxxR-32 current sensor is a completely new development from GWP, which enables the advantages of sensor technology also for the low voltage area. The design is fitting in existing common housings of CT´s, but with wide range behaviour and lower costs.
Request for a quoteGREENWOOD-POWER
Austria
The LxxxT-44 current sensor is a completely new development from GWP, which enables the advantages of sensor technology also for the low voltage area. The design is made for installation on low voltage cables either isolated or not isolated. It combines a wide range behaviour with low costs. The usage of correction factors enables even better corrections in combination with dedicated devices.
Request for a quoteGREENWOOD-POWER
Austria
The LxxxT-28 current sensor is a completely new development from GWP, which enables the advantages of sensor technology also for the low voltage area. The design is made for installation on low voltage cables either isolated or not isolated. It combines a wide range behaviour with low costs. The usage of correction factors enables even better corrections in combination with dedicated devices.
Request for a quoteGREEN CLEAN GMBH
Austria
The DIGI BACK CLEANING KIT “PELI EDITION” bestehend aus: 1 Stk. Original PELI Case # 1150 with adapted interior for the items 1x G-2051 Air Power Hi-TECH PRO 400 ml 1x V-2100 Top Ventil with Anti Static Adapter 10x T-1010 Silky Wipe – 10cm x 10cm, individually welded 1x Green Clean Digital Capture Back Cleaning Liquid 15 ml The system offers a two part cleaning process to remove all types of dust, dirt and contamination: Part ONE: Contact-Free removal of dust and loose particles with anti-static effect. Part TWO: Safe removal of dirt and smudges with a specially formulated cleaning fluid and „Silky Wipe“ cloth. All digital capture sensors (CCD & CMOS) have sensitive surfaces which are best left un-touched and contact-free cleaning methods are best! Sensors have a current going through them when in use and that creates a static charge that attracts dust, fluff and abrasions. These are all easily removed by using STEP ONE of the ANTISTATIC SET: The basis for this is the Air Power...
Request for a quoteGREEN CLEAN GMBH
Austria
Digi Back Cleaning Kit contains: 1x G-2051 Air Power Hi-TECH PRO 400 ml 1x V-2100 Top Ventil with Anti Static Adapter 10x T-1010 Silky Wipe – 10cm x 10cm, individually welded 1x Green Clean Digital Capture Back Cleaning Liquid 15 ml The system offers a two part cleaning process to remove all types of dust, dirt and contamination: Part ONE: Contact-Free removal of dust and loose particles with anti-static effect. Part TWO: Safe removal of dirt and smudges with a specially formulated cleaning fluid and „Silky Wipe“ cloth. All digital capture sensors (CCD & CMOS) have sensitive surfaces which are best left un-touched and contact-free cleaning methods are best! Sensors have a current going through them when in use and that creates a static charge that attracts dust, fluff and abrasions. These are all easily removed by using STEP ONE of the ANTISTATIC SET: The basis for this is the Air Power HI-TECH PRO 400ml aerosol can, fitted with a high quality „Top Ventil“ discharge valve and...
Request for a quoteResults for
Current sensor - Import exportNumber of results
16 ProductsCompany type