As interface - Import export

In collaboration with our specialist partners, we develop software packages specifically designed for process management, supervision, maintenance and control of the installation. If necessary, we can also produce synoptics for human-machine interfaces.

The Lascar SGD 70-A is an advanced 7-inch capacitive touchscreen display designed for use with PanelPilotACE Design Studio. This powerful display offers a wide variety of hardware interfaces, including four 16-bit bipolar analog inputs (up to ±40V dc), eight digital input/output ports, two alarm outputs, four 8-bit PWM outputs, PID control, Ethernet FTP for recorded data, multi-channel data logging and trend graphs, serial RS232 and RS485 and an additional add-on board to measure temperature.

By working with this device, you don't need a computer to get to the data you need. LogTag Online is a secure cloud solution created to manage and share your temperature data through a user accessible system. The interface holder offers several features such as, real-time alarm notifications, location monitoring, temperature logs and troubleshooting. No software is required, LogTag online is accessible from any device with internet.

High-resolution encoder MSA213C for drive technology The requirements for sensors used for position detection in automation and drive technology increase with the complexity and performance of the associated machines and systems. A new MSA213C high-resolution absolute sensor from SIKO is a perfect solution. It not only supplies the absolute position at any time without referencing and without requiring a backup battery, but thanks to its small design and many different interfaces, it can also be integrated into the system and control environment with very little effort.

The probe's measurement data can be sent to a PLC via Ethernet, EtherNet/IP, PROFINET or EtherCAT fieldbus Fieldbus compatible interface module: MG80-NE (Ethernet) / MG80-EI (EtherNet/IP) / MG80-PN (PROFINET) / MG80-EC (EtherCAT) Up to 16 MG80-CM counter modules for measuring probes can be connected to each main module. Up to 64 MG80-CM or touch probes can be connected to MG80-NE via max. 3 LINK connections Up to 255 MG80-CM or measuring probes can be connected to MG80-EI/PN via LINK connections. Theoretically, up to 65,535 MG80-CM or mestasters can be connected to MG80-EC via LINK connections. MG80-CM Counter module for connection of one DK or DT series probe (with MT13) Easy installation on DIN mounting rail LZ80-K1/K2 I/O module for MG80-EI, MG80-PN and MG80-EC Equipped with 8 inputs and 8 outputs

KUKA repair, exchange & replacement for pendants, motors and ROBOT We offer general overhaul repairs, as well as exchange and replacement parts for KCP1, KCP2 and KCP4 pendants, motors and other parts manufactured by KUKA. For each repair and every KUKA pendant that is exchanged or purchased as a replacement part from BVS, we not only replace all components that are electronically and mechanically defective as part of the product reconditioning, but also replace all of the parts that are subject to ageing or use related wear. What's more, we only use original components approved by the manufacturer or legislator to repair your KUKA pendants. We are also able to restore the full functionality of the 6D mouse. Thanks to the excellent availability of replacement products in our extensive warehouse comprising over 100,000 assemblies and the option of express repair services, you will receive your KUKA pendant as quickly as possible.

The sliding gate control valve Type 8020 in reinforced GS3 with NAMUR interface for universal positioner assembly is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. are easy to handle. For high speed and cycling applications this valve is the clear choice. Pneumatic Electropneumatic Digital Without positioner for on/off operation Metal bellows Limit switch Position feedback Manual override Pilot valve . . .

The sliding gate control valve type 8020 with NAMUR interface for universal positioner assembly is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. are easy to handle. For high speed and cycling applications this valve is the clear choice. Pneumatic Electropneumatic Digital Without positioner for on/off operation Metal bellows Limit switch Position feedback Manual override Pilot valve . . .

The K-102, K-102I, K-103-A and K-107-B interface converters enable communication between KELLER devices with an RS485 interface and a computer via RS232 (D-sub connector).

The K-404-T interface converters enable direct communication between D-line products with an I2C interface and a computer via USB.

The K-114 interface converters enable communication between KELLER devices with an RS485 interface and a computer via USB.

USB driver for the K-114 interface converter and for the DCX-18-ECO level logger. This driver is also included in KOLIBRI Desktop and Logger 5.

Windows software for configuration and diagnostics of the K-114 interface converter (termination, network bias, echo, baud rate, current consumption, supply voltage and input voltage).

The compact pressure transponders consist of a digital, extremely robust D-line pressure transmitter and a passive RFID module. They obtain their power from the reader and therefore do not require a power connection or battery replacement. The 21D RFID transponders are therefore perfect for convenient on-side reading of instantaneous values, e.g. during inspection tours or safety checks on large vehicles.

ABB repair, exchange & replacement parts for ABB IRC5 & S4 Pendants Since the start of 2018, we also supply reconditioned repairs as well as exchange and replacement parts for handheld robot control panels from the IRC5, IRC5P, S4, S4+, S4C+, S4P and S4P+ product ranges manufactured by ABB. During the repair process, we ensure that components that are better than the manufacturer's are installed in addition to the manufacturer's original parts. As a preventative measure we also replace any components that are subject to ageing or userelated wear. In addition to using components approved by the manufacturer or legislator, we test the reconditioned ABB handheld control panels with original IRB ABB robots under conditions that correspond to the actual working environment. We can therefore also provide an 24month warranty* on the complete ABB handheld control panel.

Absolute indicator with Industrial Ethernet interface which enables process-capable and intuitive positioning for manual iinear or slider adjustments. The display and evaluation of target and actual values ensures monitored format adjustment. Electronic position indicator with plug connection for magnetic sensor. Integrated Industrial-Ethernet-Fieldbus. Backlit two-row LCD. Display of target and actual value displays with integrated alignment. Display accuracy up to 0.01 mm. Absolute function via internal backup. Robust sensor technology unit thanks to magnetic scanning. User guidance through status LEDs. IP53 type of protection, IP65 as an option.

ABB repair, exchange & replacement parts for ABB IRC5 & S4 Pendants Since the start of 2018, we also supply reconditioned repairs as well as exchange and replacement parts for handheld robot control panels from the IRC5, IRC5P, S4, S4+, S4C+, S4P and S4P+ product ranges manufactured by ABB. During the repair process, we ensure that components that are better than the manufacturer's are installed in addition to the manufacturer's original parts. As a preventative measure we also replace any components that are subject to ageing or userelated wear. In addition to using components approved by the manufacturer or legislator, we test the reconditioned ABB handheld control panels with original IRB ABB robots under conditions that correspond to the actual working environment. We can therefore also provide an 24month warranty* on the complete ABB handheld control panel.

ABB repair, exchange & replacement parts for ABB IRC5 & S4 Pendants Since the start of 2018, we also supply reconditioned repairs as well as exchange and replacement parts for handheld robot control panels from the IRC5, IRC5P, S4, S4+, S4C+, S4P and S4P+ product ranges manufactured by ABB. During the repair process, we ensure that components that are better than the manufacturer's are installed in addition to the manufacturer's original parts. As a preventative measure we also replace any components that are subject to ageing or userelated wear. In addition to using components approved by the manufacturer or legislator, we test the reconditioned ABB handheld control panels with original IRB ABB robots under conditions that correspond to the actual working environment. We can therefore also provide an 24month warranty* on the complete ABB handheld control panel.

ABB repair, exchange & replacement parts for ABB IRC5 & S4 Pendants Since the start of 2018, we also supply reconditioned repairs as well as exchange and replacement parts for handheld robot control panels from the IRC5, IRC5P, S4, S4+, S4C+, S4P and S4P+ product ranges manufactured by ABB. During the repair process, we ensure that components that are better than the manufacturer's are installed in addition to the manufacturer's original parts. As a preventative measure we also replace any components that are subject to ageing or use related wear. In addition to using components approved by the manufacturer or legislator, we test the reconditioned ABB handheld control panels with original IRB ABB robots under conditions that correspond to the actual working environment. We can therefore also provide an 24 month warranty* on the complete ABB handheld control panel.

The MDS-40-LP sensors are specially designed for large volume production from 2,000 pieces or more. As these sensors are reduced to pure measurement technology, the creation of cost-effective PCB sensors was possible. Their flat design and flexible arrangement of the magnets allows easy integration in restricted spaces. Measured values are output via a rectangular signal, which is easily evaluated via, for example, digital inputs from micro-controllers.

RetailConnect - the universal tool for data conversion from any source. Irrespective of device and version the integrated communication driver ensures smooth transmission. Flexible, robust and unique as regards the integration. RetailConnect allows communication between host systems and terminal equipment. Bidirectional transfer of master data and transactions (recordings and sales) is possible via RetailConnect. Transfers can be started time-controlled or via trigger file. RetailConnect is run capable as a service or manually as command line program.

The capaNCDT DT61x0/IP is an industrial-grade, capacitive sensor system for displacement, distance and position measurements. Consisting of a sensor, a sensor cable and a controller, the measuring system is ready for use without any on-site calibration. Due to its very good temperature stability, immunity to magnetic fields and robust design that is protected to IP68, the capaNCDT DT61x0/IP is used for industrial measurement tasks such as air gap measurement in generators and regulation of plant and machinery.

KUKA repair, exchange & replacement for pendants, motors and ROBOT We offer general overhaul repairs, as well as exchange and replacement parts for KCP1, KCP2 and KCP4 pendants, motors and other parts manufactured by KUKA. For each repair and every KUKA pendant that is exchanged or purchased as a replacement part from BVS, we not only replace all components that are electronically and mechanically defective as part of the product reconditioning, but also replace all of the parts that are subject to ageing or use related wear. What's more, we only use original components approved by the manufacturer or legislator to repair your KUKA pendants. We are also able to restore the full functionality of the 6D mouse. Thanks to the excellent availability of replacement products in our extensive warehouse comprising over 100,000 assemblies and the option of express repair services, you will receive your KUKA pendant as quickly as possible.

LT80 multifunction display with interface modules and clearly structured user interface Connection of up to 32 DK or DT probes (DT probes with MT adapter) Easy installation on DIN mounting rail High speed trigger module When connecting an encoder with TTL output pulses to the trigger module, measured values from up to 16 probes can be read out synchronously in dynamic applications The synchronous measurement data can be stored on the LT80 between LT80-NE Display 7-inch touchscreen LCD display for 2 to 16 measurement channels Different measurement modes and measurement functions selectable: Current value, MAX, MIN, P-P, ADD/SUB function, 2 or 4 step comparator function for automated measuring and sorting Display I/O status 3 different interfaces (USB stick, SD card, LAN) for data storage, data transfer and parameterization Different menu languages selectable (English, German, Japanese)

Micro-Epsilon offers a comprehensive range of capacitive displacement sensors. These capacitive sensors are used for displacement, position and also for thickness measurements. Different sensor designs enable optimal integration into machines and systems. The capaNCDT sensors achieve best values in terms of linearity, temperature stability and resolution. While sub-micrometer precision is reached in industrial environments, even sub-nanometer accuracy can be achieved in clean environments.

We are your reliable partner for the realisation of your products - from the initial idea to series production and beyond. Our goal is to offer you a comprehensive full service and to manufacture your products economically and in the highest quality. We support you in the consultative development of your early concepts and prepare an initial cost estimate in the concept phase. In addition, we accompany you during series and mass production with our long-standing manufacturing partners in the Far East and ensure reliable logistical handling.

Feinmetall test connectors are available for many interfaces such as RJ, USB, HDMI and others. They can be installed very easily and effectively in test fixtures and test modules.

Our thermal management and insulation products are far from being just interim solutions. The Thermal Interface Materials (TIM) from Seifert electronic GmbH ensure optimal thermal connection between heat sinks and the components to be cooled. As electronic assemblies become increasingly compact, even a tiny gap between individual components can disrupt the necessary heat dissipation. Air pockets between the heat sink and the component being cooled hinder the optimal thermal connection. Possible consequences include temperature overload, which can lead to overheating in the worst-case scenario. Thermal management and insulation products act as connectors between the heat sink and the electronic component being cooled. They fill every tiny gap between the heat sink and semiconductor with thermally conductive material. This ensures optimal thermal connection and prevents any heat buildup.