Results for
Switzerland
We offer a wide range of material depending on the needs of the application. When working with our application engineers, we will select the material type (and heat treatment method) to ensure the bearings meet the requirements of the application. This includes factors such as high wear resistance, heavy shock loads, extreme corrosion, as well as dimensional stability.
Request for a quoteTurkey
Silo Discharger are an indispensable part of industrial enterprises. They are usually used for fast and efficient unloading of materials accumulated in silos. These machines are used in many sectors, for example, cement, flour, semolina, sugar, bran and many more are important for the storage and use of industrial materials. Application Fields ◾ At food processing industry ◾ Flour and semolina mills ◾ Macaroni factories ◾ Feed mills ◾ At other similar industrial plants
Request for a quoteTurkey
These are systems that are not fixed to the ground and are usually manufactured on wheels. Plexiglas plate, solid sheet metal, trapezoidal sheet metal, wooden plate can be used as facade material in these applications
Request for a quoteGermany
iglidur® rollers in application 14HMInews.wmv Material data of the iglidur® elastomeric bandage Density: 1,25 g/cm³ Flexural E-modulus (DIN 53457): 130 Shore D hardness (DIN 53505): 50 Maximum long-term service temperature: 80 °C Maximum short-term service temperature: 110 °C Lower application temperature: - 40 °C Specific volume resistance:: <10¹² Ωcm Surface resistance: <10¹¹ Ω
Request for a quoteNetherlands
Lifting Capacity: 2.5 Ton Loading Capacity: 2500kgs Model Name/Number: RL/LT/PT 2.5 Power Source: Hand Operated Usage/Application: Material Handling
Request for a quoteNetherlands
Material MS Usage/Application Carry Capacity 500 Kg Load Capacity 150-200 kg Color Blue , Gray Application Carry Material And Shift Number Of Wheel 4
Request for a quoteNetherlands
Application semiconductor material, Magnetic substance Shape soild Material gallium Chemical Composition Ga, Ga,Ga-In-Sn, Ga-In-Zn Purity 99.9% Min MOQ 2.5kg Package 2.5kg/bottle
Request for a quoteNetherlands
Application semiconductor material, Magnetic substance Shape soild Material gallium Chemical Composition Ga, Ga,Ga-In-Sn, Ga-In-Zn Purity 99.9% Min MOQ 2.5kg Package 2.5kg/bottle
Request for a quoteNetherlands
Product name Pine Wood Timber Application Building Material Surface Finishing Finished OEM Accept MOQ 100 m³ Length Accept customization Width Accept customization Thickness Accept customization
Request for a quoteNetherlands
Brand Thomson Type Hydraulic Capacity 2 Usage/Application Industrial Material Mild Steel Load Capacity Upto 2000 kg Fork Length Upto 3000 mm Fork Width Upto 1500 mm Minimum Order Quantity 1
Request for a quoteFrance
Torito® is a collection of warm and fashion shades, available in 3 standard finishes, embossed on one side. Range 240gsm - 270gsm White and colours Surface finishes : leather, linen, smooth Premium Black 240gsm - 270gsm - 300gsm - 350gsm - 400gsm - 450gsm - 500gsm - 590gsm Applications Brochures Promotional materials Covers Folded boxes Packaging
Request for a quoteFrance
PREMIUM is a high quality uncoated ivory board with a natural whiteness. High stiffness and natural haptic for sharper contrasts and vivid colours. Range 250gsm, 280gsm, 320gsm White Applications Brochures Advertising material Publishing Labels Packaging Invitation Menus
Request for a quotePoland
Spunbond nonwoven fabric and PE film laminate. This polypropylene material is covered with a thin polyethylene film which creates a layer resistant to synthetic blood. The laminate can be used for the production of medical gowns and protective overalls, but it is not a breathable material. Application: aprons, overalls, protective clothing, medical sheets, footwear, packaging
Request for a quoteGermany
range consists of individually designed engineering solutions resulting in the creation of innovative and complex fastening elements formed in up to six blows. 100% adaptable to any application Minimization of materials used and inventory costs Multi-functional use allows for large savings Simple and ecient assembly Alternative and replacement of turned parts
Request for a quoteGermany
Following the market trend, the new SPIES PC meets all requirements - from weight optimization and resource conservation to the use of renewable raw materials. Your desired article geometry can be developed individually.
Request for a quoteSwitzerland
Microcell foam extrusion systems from Promix are used for a wide variety of applications and for almost all polymers. Thanks to the production of very homogeneous microcellular foam structures, high-quality foam products with very low densities and excellent mechanical properties can be produced. Physical foaming can reduce material consumption and thus costs by an average of 20%. This not only saves money but also has a positive impact on the environment. Promix Foam extrusion systems set standards in the production of microcellular foam products with very homogeneous cell structure and high process consistency. The systems operate with environmentally friendly blowing fluids nitrogen or CO2 and are easy to integrate into existing or new extrusion lines. Depending on the application, density reductions of 5 to over 70 % can be achieved.The technology can be used for packaging films, sheets, foam core and corrugated pipes as wellas profiles, cable sheating, blow molds and blown films.
Request for a quoteChina
Form: Granule; Compositon: 100% PEEK Resin; Feature: Ultra-low Viscosity; Application: Material Modification & Injection Moulding.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Germany
The Elite Cut S 85 is an ideal choice for applications involving abrasive materials and asphalt, thanks to the grooves in the segments that efficiently cool the blade and discharge abrasive debris. With optimized 12mm tall segments, its special shape and composition ensure long life and consistent performance.
Request for a quoteGermany
Dymax 9801 is a LED or UV/Visible lightcurable material with superior adhesion properties for bonding camera modules, lidar, active alignment applications. The material cures with UV light but also features heatcure capability for applications where shadowed areas exist. Features: - Fast cure with LED or UV/Visible light - Low temperature heat cure (8085°C) - Moisture resistant - Thermal cycle resistant - Single component - Cold ship/Cold storage at 15°C - Passes ASTM E595 Outgassing Testing
Request for a quoteGermany
The measuring element of the load cell consists of a double bending beam on which strain gages are applied. The applied force detunes the measuring bridge so that a proportional output voltage is generated. The strain gages on the measuring element are protected against dirt and water spray by a rubber bellows. The sensor can be easily mounted via two mounting holes. The tension or compression force to be measured is introduced at the opposite end perpendicular to the sensor axis. Due to its special design, the influence by an extension (e.g. touch finger) on the measuring signal is low. Overload protection can be realized with little effort using a mechanical stop. FEATURES For tension and compression forces Measuring ranges from 0 ... 5 N to 0 ... 2 kN Relative non-linearity: ≤ ±0.1 % F.S. Very low mounting height Simple force application Material aluminium or stainless steel Special design on request burster TEDS optionally available
Request for a quoteGermany
We manufacture ready-to-install standard and special flat gaskets in large and small series. Depending on the area of application, different materials are used. Flat gaskets are mostly static and are mainly installed between two flanges in apparatus and pipeline construction. Depending on the quantity and size, the most economical manufacturing process is used.
Request for a quoteTaiwan R.O.C.
Suitable for OR, ER, patient care area, oral, dental procedure, clinics, isolation, IC practices, patients and other applications. 3ply, nonwoven material, 99% BFE at 3 micron.
Request for a quoteTaiwan R.O.C.
Suitable for OR, ER, patient care area, oral, dental procedure, clinics, isolation, IC practices, patients and other applications. 3ply, nonwoven material, 99% BFE at 3 micron.
Request for a quoteGermany
With securoll secutex offers a specially developed coating for cylinders and rolls, which is cast in form or applied directly onto the roller core. During product development the vast experience of secutex with all types of coatings was introduced. secutex supplies a wide selection of securoll for almost any application. Material hardnesses of 55°90° Shore are supplied. The innovative process ensures high precision in the coating with very low tolerances as well as optimum and longterm bonding between the cylinder/roller core and the securoll material. This ensures that the securollcoated cylinders and rollers have a a high degree of mechanical strength and wear resistance. What does securoll offer? High abrasion resistance Different Shore hardnesses Temperature resistance Low tolerances Different surfaces Special forms Coated cylinder and rollers Noisereducing Protects materials Long service life Resistant to hydrolysis
Request for a quoteGermany
We can procure the smallest turned parts for special applications. A variety of materials and surfaces can be used. We can procure the smallest turned parts for special applications. A variety of materials and surfaces can be used. Washers, screws and pins are just a few of the many variants that we can offer you.
Request for a quoteChina
ARK-BioPEEK offer ASTM F2026-17 compliant polyetheretherketone (PEEK) polymers designed specifically for surgical implant applications. Our advanced PEEK materials provide exceptional biocompatibility, mechanical strength, and thermal stability, meeting the stringent requirements of surgical implantation. Trust ARKPEEK and ARK-BioPEEK for high-quality PEEK solutions that ensure reliable and long-lasting performance in surgical procedures. ARK-BioPEEK introduce a range of cutting-edge polyetheretherketone (PEEK) polymers meticulously engineered for surgical implant applications. Our PEEK materials adhere to the rigorous specifications outlined in ASTM F2026-17, ensuring compliance with industry standards and delivering uncompromising quality.
Request for a quoteItaly
- Size 150 - 200 - 250 - 300 - 350 - 400 - 500 - 600 - 700 - 800 mm - One-piece valve body in carbon steel or AISI 304 - Square section packing seal, compressed between two stainless steel profiles held in place by two aluminum flanges that allow easy access, maintenance and adjustment of the packing, even with the valve installed - Invitation hopper for the passage of the product - Given its compact and robust structure, it is also suitable for heavier applications with materials such as gravel, sand and coal - ATEX certified version upon request - Pneumatic, manual or motorized actuators
Request for a quoteGermany
Customize foundation application with ultra-pure and hypoallergenic materials Ultra-pure and hypoallergenic, POREX® foam applicators and blenders are designed exclusively for skin contact, perfect for personal care applications - including powdered makeup, liquid foundation, skin care moisturizers and self-tanners. Available in custom colors and shapes, our foam applicators and blenders: Offer “buildable” application of makeup – Material enables sheer to full coverage. Soft to the touch– Soothing and friendly to the skin
Request for a quoteGermany
Flawless makeup application with revolutionary material designed for cosmetics Nubiform® technology is a revolutionary porous material designed for cosmetics, beauty and personal care products. Maintaining it's unique, open-cell porous structure in any shape - from flat sheets to 3D geometries - Nubiform material is ideal for cosmetic applicators. With the ability to be customized into 3D shapes, Nubiform: Ensures flawless application with flow-through technology and open-cell structure. Provides maximum comfort with soft and flexible material
Request for a quoteResults for
Application material - Import exportNumber of results
165 ProductsCountries
Category