Anti-slip - Import export

Self-adhesive conformable anti-slip tape for securing uneven tread surfaces, e.g. made of checker or lens plates. • Self-adhesive conformable anti-slip tape for improved safety of paths and treads • Suitable for indoor and protected outdoor use • The conformable aluminium tape adapts to uneven surfaces and is particularly suitable for surfaces made of checker or lens plates • Areas of application are steps, ramps, industrial floors and treads on machines and vehicles • In accordance with ASR A1.5/1.2 "Floors" to DIN 51130 slip resistance (R group) R13

Suitable for slide protection to reduce danger of sliding for any kind of wood. Especially well suited for treated wood that gets slick with wetness, moss, algae or lichens, as well as mineral surfaces and stairs. The product guarantees a highly resistant micro structure surface finish on the surfaces mentioned. Skid resistance category R9 in accordance with the German Institute for Standardization DIN 51130.

Suitable for any strained surface made of old or new softwoods or hardwoods, for example wooden floors, industrial parquet, wood paving, stairs, countertops, shelves, windowsills and glued wood. Bio Hardwax Oil is transparent and regulates moisture. The treated surfaces are highly water-repellent and resistant to common food and household chemicals in accordance with DIN 68861-1C.

H6902 printed ESD (electrostatic discharge) floor marking material using the qualities of PermaRoute to make a high definition, industry-specific, printed floor marking material. Utilising the construction of PermaRoute means this material will hold fast, whilst displaying an important message for the area it is intended for.

Printed Anti Slip Warning Tape is something that we receive many requests for. Many customers commonly want to make a hazardous area not only safe for foot traffic but also prominently highlighted as a risk area; most customers prefer to do this by warning text. As a bespoke print onto safety-grip requires certain minimum order quantities, we decided that the best way to stop disappointing clients would be to create a standard print that would cover most of the requests which we receive; we now have two standard prints on rolls and two on cut pieces.

Durbar plate, chequer plate, diamond tread are all commonly used, you can see them almost everywhere for fire exits, walkways, access platforms etc. It is a common misconception that the pattern provides a safe surface to walk on, unfortunately, this is not correct. Durbar plate is an extremely slippy surface, metal does not easily provide a non-slip floor (its hard surface does not attract grip) and the pattern often creates more problems than it solves (the rises result in less surface area for footwear). Many government safety websites warn of the risk of using durbar type plate in critical areas. Conformable Safety-Grip tape is the answer to the problems that irregular metal plates create. Durbar plate was previously impossible to coat with a non slip surface, a conventional non slip tape would rise up when stretched into the valleys.

H3409 bolt down, anti-slip plates are an ideal solution for application in areas where Safety-Grip tape is not suitable i.e constantly wet, loose or uneven surfaces, such as external wooden surfaces like decking. Bolt down anti-slip plates are manufactured specifically for these purposes, with countersunk eyelets for easy application, and can be fitted using screws, nails or clips.

Heskins anti-slip fire exit markers have been developed and produced to offer a faster, more efficient way of creating a clear zone and prominent signage for your fire exits. Compared to stencilling, masking and painting, with waits in between for drying times, Heskins alter¬native, fire exit floor markings,¬ is a one-piece, adhesive appli¬cation, that takes literally minutes to apply, and can be used immediately, complete with an industry-standard anti-slip surface.

Commonly found chemicals such as water, soap solutions or many others do not pose any harm, even occasional exposure to certain petrochemicals or harsher cleaning does not affect the material. In certain, and very rare, situations the anti-slip tape could be completely submerged under a liquid that is extremely aggressive. Some of our customers use problematic solutions; these could include high concentration MEK, toluene, acids, alkalis etc. For almost all applications our conventional Safety-Grip range performs brilliantly. In a small number of applications one of two situations can cause problems; 1. Chemical retention In this situation mild chemicals such as basic cleaning agents mixed with water and are trapped on the surface on the anti-slip tape with no way of escaping, the fluids form a reservoir and with no form of dissipation, over time, they can damage the resins that hold the minerals onto the plastic film.

Mild abrasive Safety-Grip tape features the mildest anti-slip coating we have ever manufactured. While still having 100% coverage, the granules applied to the surface are far smaller than others in our range. This results in low peak to valley measurement, which is beneficial and more desirable in some applications.

Our current crop of anti-slip materials are strong enough to withstand industrial use and more, but for a long time, we have had various customers asking us to produce very thick anti-slip materials for their application requirements, but achieving this has always created many production obstacles. In early 2015, we made the decision to produce very thick anti-slip tape measuring 2mm in depth! This has involved us modifying the necessary production machinery to be able to handle the additional thickness this material has, investing in a new range of crush cut blade holders to ensure we can create our thick Safety-Grip products to the same level of consistent quality as with our current range of anti-slip tapes.

H3460 marine anti slip tape is one of Heskins first marine specific products, tailor-made to be used on the open seas, on anything from pleasure crafts, to competitive boats and commercial vessels. Marine anti slip tape is the first product to be 100% guaranteed salt resistant. We felt it necessary to have this feature due to the long amounts of time this will be applied on a vessel out in the open sea, as while we and others have previously used Safety-Grip™ and our non-abrasives, with the exception of our chemical resistant Safety-Grip™, we could not guarantee full salt resistance. With a salt-resistant marine anti slip tape, we can safely guarantee that, subject to correct application on to a clean, dry surface, the service life will be exceptional. For additional guarantees, our ancillaries will only help prolong the life span of the material.

Adding a thicker backing liner to our anti-slip tape reduces the chance of creases and air pockets during large sheet application, resulting in a more hassle-free application and a better finish.

H3402NUC X-Coarse uses a rare and very big type of aluminium oxide granule. The grit is so heavy that it requires a special plastic film to be able to carry it without splitting. The plastic film is coated with a high tack adhesive (HG), the adhesive is designed to adhere to often difficult substrates such as low energy powder coat that are notoriously problematic for normal adhesives.

The grit is still the same substance, aluminium oxide; but the difference is the grit granules are larger with deeper valleys and higher peaks. A deep anti-slip coating helps to prevent clogging with dirt, dust, ice etc. A deeper grit provides great durability.

H3401 standard anti slip tape is made from a fine grade aluminium oxide, which makes it suitable for use in a wide range of appli­cations. The grit is a medium anti-slip abrasive coating.­ Our standard Safety-Grip is great for general anti-slip requirements possessing excellent levels of grip (measured as Coefficient of Friction). Safety-Grip is water resistant (if applied onto a non-porous surface, we do also offer a complete range of ancillaries) and has exceptional durability in external or internal areas.

Solid top GRP panels are made of standard open mesh grating finished with a solid 3mm top plate. The top plate is gritted, creating an anti-slip surface ideal for pedestrian use. High strength and lightweight, they are often specified over open mesh gratings for safety reasons, such as preventing contamination to surfaces below. The closed top also creates an easier surface to walk over, particularly for wheels. Panel Thickness: 28mm (25mm mesh + 3mm plate), 41mm (38mm mesh + 3mm plate), 53mm (50mm mesh + 3mm plate) Available in a range of colours and sizes

78% cotton, 20% polyamide, 2% elastane; or 75% cotton, 20% polyamide, 2% elastane. Full-terry quality. Soft and warming. Sole with big anti-slip print. Easy sizing by instantly visible size marking (differently colored anti-slip prints; red = 35/38, green = 39/42, blue = 43/46). Perfect for hospitals, retirement homes, sport clubs... * 2-pack. Sizes: 35-38 (red print), 39-42 (green print), 43-46 (blue print), 47-50 (grey print)

97% polyester, 3% elastane. Cute animal designs for boys and girls. Super-soft and cuddly in pretty gift box. With anti-slip print. One Size (babies and toddlers)

Kids socks with anti slipped dots

Silicone Glass Table Anti-Slip Pads are applied to the parts of the tables where the glass contacts with the metal/wooden part. When it is applied, the glass table will not be able to slide anymore.

The L3® is the ultimate heavy-duty plastic pallet for intralogistics applications. It impresses with a high load-bearing capacity of up to 2,000kg in high rack warehouses and with its slip resistance. The plastic pallet is equipped with Palgrip® anti-slip strips on the top deck as a standard feature, offering a secure hold even at an inclined position or in damp conditions, while the evenly closed Palgrip® anti-slip runners ensure absolutely smooth running on all standard conveyor technology systems. The L3® is long-lasting and remains maintenance-free. Dimensions L x W x H: 1200 x 1000 x 160 mm Weight: 26,0 kg Material: PE Load capacity: static 7500 kg, dynamic 2000 kg, In Racking System 2000 kg Reinforcement Profiles: 5 Colour: light grey / light blue or basalt grey / light blue Runners: 3, welded Palgrip® anti-slip strips on the top deck Palgrip® anti-slip coating under the runners Option: — Rim options: Without, 5 mm — RFID transponder

Polyurethane resin layer on a 100 micron PVC support, coated with grains polyurethane. Solvent acrylic adhesive. It is very easy to fix, because the adhesive he is extremely aggressive. The product is impervious to water, resistant to shock, compression and rust. high resistance to salt water, detergents, oils motor and hydrocarbons. Full range of colors: black, white, red, yellow, blue, transparent, granite brown and black/yellow

Pair of anti slip socks with xmas motifs and designed for home comfort. In soft acrylic outer polyester and with a warm inner lining. One Size 36-43. Anti-Slip Polyester

STAIRS COMPOSED OF METAL PROFILES AND ANTI-SLIP SHEET

Hot-dip galvanized structure, anti-slip grating running surface 2 Lashing Chains, Quick Hitch for forklift forklift travel, ramp mounted on solid solid tires, 120 mm side safety rails

Hot Galvanized Notched Tray, Anti-Slip 2 Lashing Chains, Eccentric Quick Hitch Hook, Double Vulkollan Roller Ramp, 2 Adjustable Support Stands, 120 mm Side Safety Rails

Advantage: 1.High strengh/Anti-corrosion/Acid&alkali resistant 2.Waterproof/ Oil proof 3.Food grade (SGS quality inspection) 4.Comfortable to wear 5.Resilience/Good puncture resistance 6.Hemp surface/Anti-slip

Descent and mounted wheels via hydraulic crank. Designed for use with 3 and 4 wheel forklift. 4 Support feet with adaptive heads Side safety rails height 21 cm, removable Anti-slip surface in hot galvanized grating 2 lashing chains included