Anti static bar - Import export

This anti-static bar has the same properties as the P-Sh-N. but is equipped with an integrated power unit, you do not need a high-voltage cable. This anti-static bar has been approved for use in certain hazardous environments. The 5m long primary cable shall be connected to the mains voltage. A neon lamp can indicate that high voltage is present. Under certain conditions the P-Sh-N-Ex bar is capable of neutralizing the materials from a maximum distance of 200 mm. Features - Short working distance: 200 mm max. - Shockless touchable emitters - The bar continues to function properly when a number of emitter pins are short-circuited, for instance due to heavy fouling. - Ideal for neutralisation of static electricity on materials when the distance varies. - Approved for use in certain explosion hazardous environments

This type of anti-static bar, a more powerful version of the EP-Sh-N is highly effective and, with its long range, ideal for neutralization of static electricity on materials when the distance varies. Under certain conditions the maximum distance may even be as large as 600 mm. The construction of the bar is so rigid that bending of long bars is only minimal. Features - Long working distance: 600 mm max. - Shockless touchable emitters - The bar continues to function properly when a number of emitter pins are short-circuited, for instance due to heavy fouling. - Ideal for neutralisation of static electricity on materials when the distance varies.

The tube diameter is adjusted to the existing tube system. And so is the number of integrated anti-static bars, based on the diameter. Simco-Ion anti-static bars can also be integrated in a tube provided by the client. The anti-static bars are arranged in two series. They are connected to a two-phase power unit to ensure optimal ionisation at high velocities. Features - Custom size pipe - Optimal ionisation at high velocities - Can be integrated in a tube provided by the client

Each individual emitter pin of this anti-static bar is coupled capacitively to the high voltage. You will therefore not get an electrical shock when the emitter pin is accidentally touched. Another advantage is that the bar continues to function properly when a number of emitter pins are short-circuited, for instance due to heavy fouling. Features - Medium working distance: 150 mm max. - Shockless touchable emitters - The bar continues to function properly when a number of emitter pins are short-circuited, for instance due to heavy fouling.

Each individual emitter pin of the MaxION anti-static bar is coupled capacitively to the high voltage. You will therefore not get an electrical shock when the emitter pin is accidentally touched. The rugged MaxION static neutralising bar has a reinforced profile that minimises damage due to accidental bending. The ground reference is embedded in the reinforced profile. The slide slot on the backside of the MaxION enables the user to position the mounting bolts as required, allowing greater mounting flexibility. After cleaning the precision emitter pins with a brush you can sweep the contaminants out of each light-angled end of the bar easily. Features - Medium working distance: 400 mm max. - Minimal risk of deflection and deformation of the anti-static bar due to glassfiber reinforced plastic profile - Shockless touchable emitters - Compact

MEJ anti-static bars are often used on production machines were short range ionisation is possible and where no moving machine parts are interfering the ionisation.The properties of this Simco-Ion anti-static bar are the same as those of type MEB, except that the MEJ type is round. Therefore mounting this anti-static bar via holes in the machine frame is possible. - Short working distance: 30 mm - Shockless touchable emitters - The bar continues to function properly when a number of emitter pins are short-circuited, for instance due to heavy fouling. - Round bar, can be easily mounted via holes in the machine frame

MEB anti-static bars are often used on production machines were short range ionisation is possible and where no moving machine parts are interfering the ionisation. Each individual emitter point of this rectangular anti-static bar is coupled capacitively to the high voltage. You will there fore not get an electrical shock when the point is accidentally touched. Another advantage is that the bar continues to function properly when a number of points are short-circuited, for instance due to heavy fouling. Features - Short working distance: 30 mm - Shockless touchable emitters - The bar continues to function properly when a number of emitter pins are short-circuited, for instance due to heavy fouling. - Compact - Complementary equipment: A2A7S/MPM

The ThunderION IQ 2.0 is a high quality and most powerfull anti-static bar for the Industry. The static eliminator has a long reinforced extruded profile body that provides for easy and sturdy mounting. Due to the strength of the bar sizes up to more than 5 meter can be delivered. Mounting the anti-static bar could be realised with a few mounting screws. The bar has an integrated 24v power supply with a rugged industrial M8 connection. The very effective bar makes discharging of high static charges distance more than 1 meter possible, even in high-speed production applications up to 1000m/s. The bar is complete shockless so touching the Tungsten(Wolfram) pins is completely safe. The bar functions completely stand-alone and can for future demands be connected to external sensors and monitoring systems to create a full close loop feedback system. Function control of the bar is done by means of high-power LED to make check-up of the functionality of the bar an easy job.

Performax Easy Ex: for explosion hazardous environments Compact high efficient static neutralising for explosion hazardous environments . The Performax Easy Ex has an integrated high voltage power supply and requires only a low voltage input of 24V DC. A two color high bright LED visualises bar ON (green) or bar FAULT (red). On the standard connection cable an additional wires for remote on/off contact is available and a signal indicating high voltage O.K. The Performax Easy Ex bar has light slanted ends and protection classification IP66 which allows easy cleaning. The aluminum profile offers a very rugged structure even up to 3 meters. Universal mounting brackets are supplied for various mounting options.

The emitter pins of the Super Service anti-static bars are directly coupled to the high voltage so that maximum ionising current is reached. These bars can be cleaned easily and therefore they are suited for being installed in places which may be subject to heavy fouling. Touching an emitter pin will cause an unpleasant electrical shock. These bars are usually installed in such a manner that the emitter pins cannot be touched by personnel. Features - Short working distance: 30 mm max. - Optimal neutralisation because the emitter pins are directly coupled to the high voltage - Is suited for being installed in places which may be subject to heavy fouling - Non-touch-safe emitters - Heat and chemical resistant - Compact

Automatic Feeder approximately 1000 sheets per suckers Anti static bar and double sheet detection Gripping and transferring the sheets entering the air bag assembly is driven by a servomotor and ball screw to ensure accuracy in the positioning + 0.1 mm Mark detection for automatic alignment of the sheet by XY two high precision optical lasers + 0.1 mm Detecting printed marks on the Y axis by one laser precision optical alignment and automatic + 0.1 mm positioned at the inlet of the tool Tool punch die cavities horizontal or vertical SYSCO manufacturing Hydraulic quick and silent 5 Tons Stacking cards interchangeable with 6 stores Transferring sheets in output controlled by servomotor and ball screw Evacuation from falling rollers

The Performax Easy IQ is a high quality Industrial standard anti-static bar. The static eliminator has a glassfiber reinforced body that provides for easy and sturdy mounting. Due to the strength of the bar sizes up to more than 5 meter can be delivered. Mounting the anti-static bar could be realised with few mounting screws. The bar has an integrated 24v power supply with a rugged industrial M8 connection. The very effective bar makes discharging of high static charges possible, even in high-speed production applications up to 1000m/s. The bar is complete shockless so touching the Tungsten(Wolfram) pins is completely safe. The bar functions completely stand-alone and can for future demands be connected to external sensors and monitoring systems to create a full closes loop feedback system. Function control of the bar is done by means of high-power LED to make check-up of the functionality of the bar an easy job, even from further distances.

Sensor IQ Easy: that measures the electrostatic charge A sensor that measures the electrostatic charge of a web can be added to the IQ Easy platform. The Sensor IQ Easy is a bar type device that can hold op to 16 sensor heads. Each sensor head can be placed on a strategical position across the web to monitor the electrostatic charge. All data of each sensor head is communicated to the Manager IQ Easy and stored for process monitoring. For dirty environments or for precautionary protection of the sensor heads, the Sensor IQ Easy bar is equipped with a compressed air connection. Using only a very low pressure and air volume dirt entering the orifice of the sensors is prevented. Anti static bars or charging generators in the system can act on data received from a sensor. This makes it possible to control the static charge level on the web in real time using a closed loop feed back and correction routine.

This power unit is equipped with two high-voltage transformers with 180°phase-shifted output voltages. As a result, the anti-static bars connected to the power unit produce positive and negative ions simultaneously. This ensures optimal neutralization of static charges even at very high velocities. This power unit is fitted with two high-voltage indicators and an on/off switch with an indicator lamp. Feeatures - Suitable for very high production velocities - Fitted with two high-voltage indicators - Fitted with an on/off switch with an indicator lamp

The ThunderION Control Module provides the power and the control for up to four ThunderION anti-static bars. With this Control Module, you can control all connected ThunderION anti-static bars and check they are working correctly from a central location. The Control Module operates on the mains voltage, which can be turned on and off with a switch. A cable with a pre-assembled connector at each end links the ThunderION anti-static bar with the Control Module. This offers quick and easy assembly. All cables carry just 24 V. The Control Module enables you to check the functioning of each connected anti static bar. A green LED indicates that the bar is switched on. A red LED indicates that a fault has been detected. Via the I/O port, you also have the option of switching each bar on/off remotely and separately, as well as checking its correct functioning. Features - Provides power for up to 4 ThunderION anti-static bars - Controls the operation for up to 4 ThunderION anti-static bars by

The airknife is constructed of extruded aluminium with incorporated mounting grooves. This design provides a precise air volume over the entire width of the airknife. In the airknife tube a high air pressure appears and is flowing out of the airknife narrow outflow opening. The anti-static bar produces positive and negative ions which are blown onto the surface by the airknife. The electrons will now be exchanged, which causes the surface to be neutralised and the impurities to be removed. For use in hazardous zones, the Typhoon with the P-Sh-N-Ex anti-static bar is approved. Features Incorporates Simco-Ion anti-static bars which quickly neutralize static, facilitating easy removal of particulate Clean, uniform, high-velocity ionised air provides ‘‘one-step’’ cleaning Direct-drive motors require little or no maintenance Anodised finish for corrosion protection Connection for pressure sensor New design extruded aluminium profile Cost efficient versus compressed air

The airknife is constructed of extruded aluminium with incorporated mounting grooves. This design provides a precise air volume over the entire width of the airknife. In the airkife tube a high air pressure appears and is flowing out of the airknife narrow outflow opening. The anti-static bar produces positive and negative ions which are blown onto the surface by the airknife. The electrons will now be exchanged, which causes the surface to be neutralised and the impurities to be removed. For use in hazardous zones, the Typhoon with the P-Sh-N-Ex anti-static bar is approved. Airpressure sensor Each Typhoon system is supplied with an airpressure sensor wich can measure the air pressure inside the airknife. If the pressure drops under the required level, the system does not work optimal. A system check is then neccessary, often it appears that the air filter needs to be cleaned. Power unit A2A7M Typhoon systems with EP-Sh-N anti-static bars incorporate a power unit type A2A7M.

The HP-N-Ex ionizing air blower consists of a motor and a fan. The ambient air is drawn on one side and blown off along an anti-static bar. The effective ionizing width is 500 mm. This ionisation blower has been approved for use in certain explosion-hazardous environments. The power unit is integrated in the anti-static bar. - Working distance: 1500 mm max. - Working width: 500 mm - Approved for use in certain hazardous environments - Integrated power unit

The VolumION is a very robust ionizing air blower with an effective ionising width of 500 mm. The VolumION consists of a motor, two fans and an ionisation unit. Ambient air is drawn on two sides and blown off along three anti-static bars. The air flow that is drawn in is adjustable on both sides. This ionising air blower is also ideal for long range neutralising when paper and film webs are being wound. The air inlets can be fitted with a special filter. Features - Working distance: 1500 mm max. - Working width: 500 mm - Ideal for long range neutralising when paper and film webs are being wound - Built-in shockless anti-static bars - The air inlets can be fitted with a special filter

The Aerostat Sentry ionizing air blower neutralises static charges perfectly. The Sentry has been designed for areas where static electricity causes problems, ranging from dust and dirt attraction to uncomfortable electrical shocks to personnel. The Sentry is ideal for light industrial environments and it increases productivity. The Sentry is excellently suited to neutralise static charges on threedimensional objects, for instance injection moulded products. This ionizing air blower stands out for its compact design. It has an integrated fan which draws in the ambient air and blows the air off along the anti-static bars. The air inlet may be fitted with a special filter. The air volume can be adjusted electrically. The high-voltage power unit for the anti-static bars is also integrated. The anti-static bars are equipped with a (patented) cleaning system. The control knobs at the rear are easily reached and operated. Features - Working distance: 1000 mm max.

BASED ON POLYIMIDE FILM COATED WITH A SPECIAL SURFACE CONDUCTIVE ADHESIVE. STATIC GENERATION DURING ROLL UNWIND AND TAPE APPLICATION IS ELIMINATED. IT CAN WITHSTAND WAVE SOLDER TEMPERATURES UP TO 300C AND LEAVES NO ADHESIVE RESIDUE ON PRINTED CIRCUIT BOARDS UPON REMOVAL.

Simco-Ion Europe offers various electrodes, including the 5 Point, Linear 6 Point and thePinner Claw, specifically for spotcharging small surfaces. These electrodes are also ideal for edge charging in cast-film extrusion processes. The material applied permits high temperature use. The electrodes are resistor-protected to avoid sparkover. The points are replaceable. Features - Charging electrode - Working distance: min. 12,5 mm - Number of emitter pins: 5 - Dimensions: Length 166 x Ø 20 mm

Simco-Ion Europe offers various electrodes, including the 5 Point, Linear 6 Point and the Pinner Claw, specifically for spotcharging small surfaces. These electrodes are also ideal for edge charging in cast-film extrusion processes. The material applied permits high temperature use. The electrodes are resistor-protected to avoid sparkover. The points are replaceable. Features - Charging electrode - Working distance: min. 12,5 mm - Number of emitter pins: 3 - Dimensions: Length 158 x Height 35 x Ø 20 mm

The HDR charging bar suits high velocity applications. Each individual point being fitted with a resistor, so the chance of spark-over is strongly reduced. features - Charging bar - Working distance: 20 mm using <30 kV, 75 mm using 30-60 kV - Suits high velocity applications - Chance of spark-over is strongly reduced

CM5 is fully backwards compatible with ECM30/60 and ECM DI30/60. For basic users a quick set-up menu is provided to set-up the generator to function as an ECM30/60. The Menu is available in English, German, French and Italian. The new standard function Current Control will enable you to set a constant current vs a constant voltage. This will provide a much more stable charging and will compensate contamination and emitter pin wear automatically. Advanced Current Control is a revolutionary new feature. The generator keeps track of the supplied current to the electrode. It senses when there is no material to be charged and switches the current to a safe low level. This prevents sparkover and emitter pin wear. When material is reinserted the current will switch back to the high level current. A serial bus interface can be fitted additionally to enable the generator to communicate through serial bus interfaces s.a. Profibus or CANopen (Other serial protocol available on request).

CM5 is fully backwards compatible with ECM30/60 and ECM DI30/60. For basic users a quick set-up menu is provided to set-up the generator to function as an ECM30/60. The Menu is available in English, German, French and Italian. The new standard function Current Control will enable you to set a constant current vs a constant voltage. This will provide a much more stable charging and will compensate contamination and emitter pin wear automatically. Advanced Current Control is a revolutionary new feature. The generator keeps track of the supplied current to the electrode. It senses when there is no material to be charged and switches the current to a safe low level. This prevents sparkover and emitter pin wear. When material is reinserted the current will switch back to the high level current. A serial bus interface can be fitted additionally to enable the generator to communicate through serial bus interfaces s.a. Profibus or CANopen (Other serial protocol available on request).

A compact high voltage supply with an adjustable output voltage of 0 - 20 kV (with a maximum current of 0,7 mA) clearly shown on the digital display. State-of-the art electronics are employed with a remote control option. The power supply is available with a positive or negative output voltage. A warning lamp lights up if the system is overloaded or in the event of spark-over. Features - Output voltage of 0 – 20 kV - Available with a positive or negative output voltage - Remote control is possible - A warning lamp lights up if the system is overloaded or in the event of spark-over - 180 ° reversible control panel equipped with membrane switches