Angles - Import export

RST20i3 connector, angled 90°, 3 positions, plug, connection type screw connection, rated voltage 250 V, rated current 20 A, cable diameter 6 – 10 mm, coding color / contact insert black

• Robust transmitter for angular position suitable for field applications • Highest degree of mechanical and electrical safety • Capacitive scanning system provides absolute position immediately after activation • Measuring range and sense of rotation can be adjusted by a switch and two push-buttons • Zero position and end position are independently adjustable • Linear and V characteristic of the output value free programmable • No wear, low annual maintenance and mountable anywhere • Vibration and shock-resistant • Analog output signal 4…20 mA, 2-wire connection • Explosion protection acc. ATEX and IECEx • Suitable for ocean-going vessels acc. GL

• Robust transmitter for angular position suitable for field applications • Highest degree of mechanical and electrical safety • Proven capacitive scanning system • No wear, low annual maintenance and mountable anywhere • Vibration and shock-resistant • Measuring range (zero point and end position) and sense of rotation via Modbus/TCP adjusted

The transmitter converts the tilt angle into a direct current signal, proportional to the angle. Tilt angle values of a platform stand for important measuring data as a part of the safety and control system of that type of machinery. • Robust magnetoresistive angular position transmitter with interface SSI, contact free, freely rotatable without stops • With oil-damped pendulum system • The sensor is contact free and has minimal abrasion on the pendulum • Measuring range, sense of rotation, zero position and measuring span programmed directly at the transmitter

The transmitter converts the tilt angle into a direct current signal, proportional to the angle. Tilt angle values of a platform stand for important measuring data as a part of the safety and control system of that type of machinery. • Robust magnetoresistive CANopen angular position transmitter, conctact free, freely rotatable without stops • With oil-damped pendulum system • The sensor is contact free and has minimal abrasion on the pendulum • Pendulum shaft has no mechanical stops and can be 360° infinitely rotated • Reduced wiring expenditure • Autoconfiguration of the network • Comportable access of all instrument parameters • Instrument synchronisation, simultaneous data read-in and read-out

The KINAX N702-INOX HART is a very robust, absolute inclination transmitter. It is particularly suited for harsh environments due to it is high mechanical strength and the hermetically sealed stainless steel housing. • Hermetic watertight and dust-proof housing IP68 • Resistant to aggressive media such as sea waterand detergent • Stainless-steel housing INOX AiSi 316Ti (1.4571) • High measuring accuracy (±0.2°) • Steadfast to high mechanical loads due to robust design and high-quality materials • Safe electrical connection by flexible signal line • Standard synchro flange or mounting plate • 2-wire connection via flexible signal line • HART compatible • Simple parameterization via standard Common Practice Commands without additional DD

The transmitter converts the tilt angle into a direct current signal, proportional to the angle. Tilt angle values of a platform stand for important measuring data as a part of the safety and control system of that type of machinery. • Robust magnetoresistive angular position transmitter, conctact free, freely rotatable without stops • With oil-damped pendulum system • The sensor is contact free and has minimal abrasion on the pendulum • Measuring range, sense of rotation and zero position programmed directly at the transmitter

The KINAX N702-INOX Series of Tilt Sensor, manufactured by Camille Bauer Metrawatt AG, is specifically designed for robust heavy-duty utilization. This device is configured as a high robust and absolute inclination transmitter. It is mainly suitable for hostile areas applications. Moreover, this tool is made from sealed stainless-steel enclosure design and has an intense mechanical strength to generate more efficiently, and offers high installation versatility.

Converts the angular position of a shaft into a load independent direct current signal, proportional to the angular shaft position. • Robust transmitter for angular position suitable for field applications • Highest degree of mechanical and electrical safety • Proven capacitive scanning system • No wear, low annual maintenance and mountable anywhere • Vibration and shock-resistant • Measuring range, sense of rotation, zero position and linear/V-characteristic can be adjusted by a switch and two push-buttons • Analog output signal 4…20 mA, 2-wire connection • Zero position and end position are independently adjustable • Capacitive scanning system provides absolute position immediately after activation • Suitable for ocean-going vessels acc. GL

Realit produces both equal and unequal aluminium angles from 15 х 15 х 1 mm to 170 х 70 х 5 mm which are used in construction and other industries. They can be powder coated in any RAL colour, processed mechanically and anodized.

Angle encoder modules from HEIDENHAIN are combinations of angle encoders and high-precision bearings that are optimally adjusted to each other. They are characterized by their high degree of measuring and bearing accuracy, their very high resolution, and the highest degree of repeatability. The low starting torque permits smooth motions. Due to their design as completely specified and tested composite components, handling and installation is very simple.

Angle encoder modules from HEIDENHAIN are combinations of angle encoders and high-precision bearings that are optimally adjusted to each other. They are characterized by their high degree of measuring and bearing accuracy, their very high resolution, as well as optimum repeatability. The low starting torque permits smooth motions. SRP angle encoder modules are additionally equipped with an integrated torque motor. They therefore combine a motor, precision bearing and encoder with very high accuracy in one compact system. The torque motor with its very low detent torque enables extraordinarily smooth motion control. Neither disruptive detent torques nor radial forces impair the high guideway accuracy of the bearing. Thanks to their design as completely specifi ed and tested composite assemblies, handling and installation is very simple.

Angle encoder modules from HEIDENHAIN are combinations of angle encoders and high-precision bearings that are optimally adjusted to each other. They are characterized by their high degree of measuring and bearing accuracy, their very high resolution, and the highest degree of repeatability. The low starting torque permits smooth motions. Due to their design as completely specified and tested composite components, handling and installation is very simple. Setup Since HEIDENHAIN manufactures the bearings as well as the encoders, the two functional assemblies are highly integrated. Fewer components are necessary than in conventional solutions, resulting in fewer joints. This permits a very compact and rigid design, with particularly low overall heights. Currently, angle encoder modules with hollow shafts of 35 mm and 100 mm are available.

Functional tool used during welding, soldering, assembly, etc. Strong magnets ensure good grip of workpieces at different angles. Very helpful at the welding stand, it can replace an extra pair of hands. Technical data: Catholog number: 0700 014 016 EAN: 7330725013447 Brand: ESAB Horizontal lifting capacity (load capacity): 36 kg Lifting capacity: 12.5 kg Allows mounting at an angle of: 45, 90, 135 degrees

Functional tool used during welding, soldering, assembly, etc. Strong magnets ensure good grip of workpieces at different angles. Very helpful at the welding stand, it can replace an extra pair of hands. Technical data: Brand: ESAB EAN: 7322371426849 ESAB code: 0700 014 015 Horizontal lifting capacity (load capacity): 20 kg Lifting capacity: 7.5 kg Allows mounting at an angle of: 45, 90, 135 degrees

Compact right angle motor valve made from stainless steel for on/off and control operation, ideal for installations where space is limited and for use with neutral and aggressive media. The valve is a perfect alternative to pneumatic valves if compressed air is unavailable, on request with failsafe option. Whitworth pipe thread NPT thread Positioner electronics, limit switch, position feedback All control actuators are also available with fail safe feature. Low temperature version Pressure balanced version Degreased version, Silicon or PTFEfree version

Pneumatic right angle control valve with integrated positioner for high cycle applications and compact installations. Due to the stainless steel design suitable for neutral and aggressive media but also for a wide range of temperature applications. Whitworth pipe thread NPT thread Whitworth pipe thread NPT thread Piston actuator of Brass (chrome plated) Stainless steel Polymer Stainless steel diaphragm actuator Low temperature version Degreased version, Silicon or PTFEfree version …

Compact angle seat motor valve for on/off and control operation with neutral and aggressive media. A version with failsafe option is available.Whitworth pipe thread NPT thread Welding ends Triclamp connection Special connectionsPositioner electronics, limit switch, position feedback All control actuators are also available with fail safe feature. Low temperature version Pressure balanced version Degreased version, Silicon or PTFEfree version …

Pneumatically operated angle seat valve is the extremely reliable allrounder in valve technology and is predestined for very high switching capacities. In stainless steel design for neutral and aggressive media but also for a wide range of temperature applications suitable. The angled seat design offers a high flow rate. Whitworth pipe thread NPT thread Welding ends Triclamp connection Special connections Limit switch Pilot valve Manual override . . . Stainless steel Bronze Brass Piston actuator of Brass (chrome plated) Stainless steel Polymer Stainless steel diaphragm actuator Low temperature version Pressure balanced version Version with approval according to DIN 161 Degreased version, Silicon or PTFEfree version …

AC connection cable 5m with Betteri plug and Wieland plug. 5 meter mains connection cable for the AC connection of the module inverter. With this 5 meter connection cable, the inverter can be connected to the house network. Just electricity. At one end of the cable with fitted Betteri mains connection socket - at the other end of the cable with Wieland plug. Simply DIY. Just plug in.

10 meter mains connection cable for the AC connection of the module inverter. With this 10 meter connection cable, the inverter can be connected to the house network. Just electricity. There is a Wieland connector at one end of the cable. Simply DIY. Just plug inc

10 meter mains connection cable for the AC connection of the module inverter. With this 10 meter connection cable, the inverter can be connected to the house network. Just electricity. At one end of the cable with fitted Betteri mains connection socket - at the other end of the cable with Wieland plug. Simply DIY. Just plug in.

Raised access floor socket 8504B with 4 slots. The housing is made of sendzimir galvanized sheet steel. The Frame and lid made of stainless steel. The lid also closes when standard plugs are inserted in a straight or angled shape. The removable lid can be covered with 15 mm flooring like parquet, cork, carpet, etc. Other equipment variants on request

Joystick in ergonomic design for FERRUM wheel loaders . Scope of delivery as shown with sleeve and link screw connection.

The GEMÜ 550 2/2-way angle seat globe valve has a low maintenance stainless steel piston actuator and is pneumatically operated. The valve spindle is sealed by a self-adjusting gland packing providing low maintenance and reliable valve spindle sealing even after a long service life. A wiper ring fitted in front of the gland packing protects the seal against contamination and damage. —Suitable for inert and corrosive liquid and gaseous media —All medium wetted parts can be selected to suit relevant applications —Suitable for high media temperature —Stainless steel actuator easily cleanable

The GEMÜ 507 2/2-way angle seat globe valve has an ergonomically designed plastic handwheel and is manually operated. The valve spindle is sealed by a self-adjusting gland packing providing low maintenance and reliable valve spindle sealing even after a long service life. A wiper ring fitted in front of the gland packing protects the seal against contamination and damage. A stainless steel bellows and a handwheel extension are available as options (not for operator size 0). —Various valve body connections (threaded sockets, threaded spigots, butt weld spigots) available —High flow rates due to angle seat design —Optionally for contact with foodstuffs as per directive (EC) No. 1935/20041 (K-no. 1935)

The GEMÜ 554 2/2-way angle seat globe valve has a plastic piston actuator and is pneumatically operated. The valve spindle is sealed by a self-adjusting gland packing or a compact seal cartridge, dependent on the size and version. A wiper ring or the wiper contour of the seal cartridge additionally protects the valve spindle against contamination and damage. This provides low maintenance and reliable spindle sealing even after a long service life. —Simple and fast commissioning —Good flow capability and compact design —Valve and positioner are optimally adapted to each other. (For positioner details please refer to the relevant data sheets) —Optionally suitable for contact with food according to Regulation (EC) No. 1935/2004 (K-No. 1935) —Standard gland packing suitable for vacuum up to 20 mbar (abs.)

SWR magnetic clamping brackets are switchable, precise devices that meet the highest quality requirements. Each leg can be switched separately and the holding force can be infinitely adjusted for positioning. The prismatic ground underside enables work to be carried out on flat and round material. SWR is available in the following versions: SWR 150, angular adjustment locking at 30,45,90,120,150,180° or free via locking screw. SWR 180, angle adjustment 45°-225°.

It is impossible to operate electronic devices without the help of handheld chargers. Currently, everyone is striving to shorten the charging time by increasing efficiency and reducing energy waste. The Acefast charger is a product that meets the current market requirements. The use of gallium nitride (GaN), charger power up to 100W and 4 USB charging ports are ideal parameters for every electronics lover. Gallium nitrideis a semiconductor material that not only improves the efficiency of the charging process, but also requires much less energy and takes up minimal space. Thanks to this, it is ideal for mobile use, which affects more extensive designs of high-power chargers and a large number of charging ports. Acefast A37 supports a large number of fast charging protocols: PPS, PD3.0, PD2.0, QC4+, QC3.0, QC2.0, AFC, FCP, SCP, DCP 1.5A, iPhone 2.4A, Samsung 2A. The charger is compatible with 100 to 240 volts.