Results for
SIMA DIS TICARET ALUMINYUM SAN. A.S.
Turkey
Aluminium rods produced in 2000 - 6000 - 7000 alloys under standards below: Chemical Composition: EN 573-3 ASTM B221 AMS-QQ-A-200 Mechanical Properties EN 755-1/2 ASTM B221 AMS-QQ-A-200 Tolerances+Geometry EN 755-3/4/5/7 ASTM B221 AMS-QQ-A-200
Request for a quoteSIMA DIS TICARET ALUMINYUM SAN. A.S.
Turkey
Production of customized profiles in desired dimensions
Request for a quoteEMTA KABLO SAN. VE TIC. AS
Turkey
EMTA Conductor & Cable has worldwide experience in rod manufacturing for different standarts and countries. EMTA has produced in excess of 60,000 metric tons of Continuous Cast Aluminum Rod in its own plants in Kadirli. EMTA Aluminum Continuous Casting and Rolling lines are designed to produce pure electrical conductor grade aluminum rod by using A7E (purity of 99,7%) and A8 (purity of 99,8%) and alloy conductor grade aluminum rod coils directly from pure molten metal on a continuous basis. EMTA can produce heat-treatable alloys rod with tempers supplied which from F (as Fabricated) to T4 (Thermally Treated). EMTA manufacturing lines are designed to produce from 9.5 to 15 mm diameter rods in level wound coils and packed in both "Eye to Side" and "Eye to Sky" coils of 2 tons covered with paperboard and plastic shrinkage to be delivered on wooden pallets.
Request for a quoteEMTA KABLO SAN. VE TIC. AS
Turkey
Aluminium Compacted Conductors from 16mm2 to 800mm2 for cable manufacturers.
Request for a quoteXIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
Polished Aluminum Nitride (ALN) Ceramic Rod: The aluminum nitride (AlN) ceramic has high thermal conductivity(5-10 times as the alumina ceramic), low dielectric constant and dissipation factor, good insulation and excellent mechanical properties, non-toxic, high thermal resistance, chemical resistance ,and the linear expansion coefficient is similar with Si,which is widely used in communication components, high power led, power electronic devices and other fields.Special spec products can be produced upon requests. Product Features 1.Uniform microstructure 2.High thermal conductivity* (70-180 Wm-1K-1), tailored via processing conditions and additives 3.High electrical resistivity 4.Thermal expansion coefficient close to that of Silicon 5.Resistance to corrosion and erosion 6.Excellent thermal shock resistance 7.Chemically stable up to 980°C in H2 and CO2 atmospheres, and in air up to 1380°C (surface oxidation occurs around 780°C; the surface layer protects the bulk
Request for a quoteSHENZHEN PROMOSTAR HARDWARE CO.,LTD
Germany
These are the accssories made by aluminum,which is used in many fileds, such as building industry,door locks, door handles and so on .
Request for a quoteXIAMEN NINESUN IMP. & EXP. CO., LTD
China
Aluminum alloy with copper as the main trace element.High strength hard aluminum, can be strengthened by heat treatment, the strength is only second to 7 series.Generally used in structural materials, but also for forging.Used for structural parts of aircraft, structure parts of building and transportation tools, mould, mechanical parts requiring high strength, cabinet shell,etc. Place of Origin: China Application: Industrial Surface Treatment: Anodizing Shape: Round Technique: Extruded Hardness: 99-200 Alloy Or Not: Is Alloy Al (Min): 90% Yield (≥ MPa): 275 Temper: T3 - T8 Ultimate Strength (≥ MPa): 425 Supply Ability: 1000000 Ton/Tons per Week Packaging Details: standard export package or as your requirement Payment term: T/T,L/C etc. Port of shipment: Xiamen ,China
Request for a quoteCARL FRIEDRICH USBECK KG
Germany
aluminium alloy*powdercoated*for rods up to 13 mm Ø*nickel plated brass screws
Request for a quoteCARL FRIEDRICH USBECK KG
Germany
aluminium alloy*powdercoated*for rods up to 13 mm Ø*nickel plated brass screws
Request for a quoteCARL FRIEDRICH USBECK KG
Germany
aluminium alloy*powdercoated*for rods and*for square rods up to 26 mm Ø*for benches up to 55 mm
Request for a quoteCARL FRIEDRICH USBECK KG
Germany
aluminium alloy*powdercoated*for rods up to 13 mm Ø*for benches up to 60 mm*hinged screws
Request for a quoteALUMINIUMWERK UNNA AG
Germany
On request, we can supply aluminium alloys in the form of rod or bar. These are available in most of the commercially available aluminium alloys. The tolerances of extruded aluminium rods and bars can also be further improved by subsequent drawing. In recent years, ALUnna has specialised in the production of rod and bar meeting the highest quality standards. If you require a specific delivery option for rod or bar such as special testing then we will definitely find a solution for you.
Request for a quoteBÜRKLE GMBH
Germany
Sterilisable pendulum beaker made of stainless steel V2A (1.4301) for industry and water treatment. Beaker with scraping edge, capacity 1000 ml. Ideal for powders, granulates, pastes and slurries. Particularly suitable for sampling from basins, tanks, shafts, open water etc. Sample depths of up to 6 m can be reached with the length-adjustable aluminium telescopic rods. The TeleSchöpfer telescopic rod with tools is a versatile sampling system. The interchangeable tools (angle cup, pendulum cup, bottle holder, stainless steel cup and landing net) are suitable for a wide range of applications. The tools are firmly connected to the telescopic rod by a practical snap connection.
Request for a quoteBÜRKLE GMBH
Germany
Different tools can be attached to the telescopic rod (snap-in joint). The individual rods have been provided with an end stop. This means that one rod cannot accidentally slip out of another rod. The telescopic rods cannot be rotated radially, which means even better handling! Telescopic rod 5355-0280, extremely short model – yet extendable up to 280 cm. Fits into every car boot! TeleScoop is a versatile sampling system with exchangeable tools for a wide range of applications. The tools (angular beaker, pendulum beaker, bottle holder, stainless steel beaker and dip net) are attached to the telescopic rod by a practical snap-in joint. Ideal for sampling from baths, tanks, shafts, open water courses etc. Sampling depths down to 6 m can be reached with the adjustable telescopic aluminium rod.
Request for a quoteBÜRKLE GMBH
Germany
The surface net with flat net is ideal for sampling and collecting solids and organisms from the water surface. The sampler is particularly suitable for taking samples from basins, tanks, shafts, open waters, etc. Sample depths of up to 6 m can be reached with the length-adjustable aluminium telescopic rods. The TeleSchöpfer telescopic rod with tools is a versatile sampling system. The interchangeable tools (angle cup, pendulum cup, bottle holder, stainless steel cup and landing net) are suitable for a wide range of applications. The tools are firmly connected to the telescopic rod by a practical snap connection.
Request for a quoteBÜRKLE GMBH
Germany
The depth catch net with large net is ideal for sampling solids and organisms below the water surface. The sampler is particularly suitable for sampling from basins, tanks, shafts, open waters, etc. Sample depths of up to 6 m can be reached with the length-adjustable aluminium telescopic rods. The TeleSchöpfer telescopic rod with tools is a versatile sampling system. The interchangeable tools (angle cup, pendulum cup, bottle holder, stainless steel cup and landing net) are suitable for a wide range of applications. The tools are firmly connected to the telescopic rod by a practical snap connection.
Request for a quoteBÜRKLE GMBH
Germany
Pendulum beaker made of polypropylene with graduation and spout available in three sizes. The beaker automatically swings into the horizontal position. This prevents spillages. Also suitable for deep and narrow shafts (Ø 150 mm). Particularly suitable for sampling from basins, tanks, shafts, open water etc. Sampling depths of up to 6 m can be achieved with the length-adjustable aluminium telescopic rods. The TeleSchöpfer telescopic rod with tools is a versatile sampling system. The interchangeable tools (angle cup, pendulum cup, bottle holder, stainless steel cup and landing net) are suitable for a wide range of applications. The tools are firmly connected to the telescopic rod by a practical snap connection.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
BÜRKLE GMBH
Germany
Robust pendulum cup made of stainless steel V2A (1.4301) for industry and water treatment. The cup automatically swings into the horizontal position. This means that nothing can spill. The small diameter (Ø 130 mm) also makes it suitable for deep and narrow shafts. Particularly suitable for sampling from basins, tanks, shafts, open water etc. Sampling depths of up to 6 m can be achieved with the length-adjustable aluminium telescopic rods. The TeleSchöpfer telescopic rod with tools is a versatile sampling system. The interchangeable tools (angle cup, pendulum cup, bottle holder, stainless steel cup and landing net) are suitable for a wide range of applications. The tools are firmly connected to the telescopic rod by a practical snap connection.
Request for a quoteLALK GMBH &CO. KG
Germany
The MR-21 measuring wheel has a quality counter that accurately records distances in the running direction and in the opposite direction. The run rubber is ground at exactly 318.5 mm diameter with a convenient zero-setting lever next to the counter.The MR-21has a maximum accuracy of 0.02 percentand is certified with a test label. The frame of the measuring wheel is welded by robot to ensure consistent quality over time, and the device also includes an auxiliary arm and an integrated brake. In addition, the quality indicator is "made in Germany" and is conveniently located over the running wheel for easy reading. The folding guide rod is aluminum and the device is equipped with a spoke wheel.
Request for a quoteVKF RENZEL GMBH
Germany
The Rollbanner "Stick" is a classic Roll Up Banner, doubling up as a sneeze guard. A PET banner is concealed in the aluminium casing and can be pulled out, which can be pulled out. We can print this banner for you so that the protective item also serves as advertising or information space. The display combines the features of a high-quality roll up and a transparent sneeze guard. The roll up banner can be set up very easily. First, the article is taken out of the supplied transport bag. Then pull up the PET banner from the stand and attach it in place with the rod. The aluminium pole just has to be slotted together to do this. In this way the roll up display is perfectly tensioned within a very short time. When assembled, the article can still be moved and repositioned. However, the banner should be rolled up again for longer distance transport.
Request for a quoteBÜRKLE GMBH
Germany
The angular beaker, available in three different sizes, is particularly flexible and enables precise sampling. The position of the beaker can be set at different angles so that samples can be taken from different depths and surface conditions, even from areas that are difficult to access. The sampler is particularly suitable for taking samples from basins, tanks, shafts, open water etc. Sample depths of up to 6 m can be reached with the length-adjustable aluminium telescopic rods. The TeleSchöpfer telescopic rod with tools is a versatile sampling system. The interchangeable tools (angular beaker, pendulum beaker, bottle holder, stainless steel beaker and landing net) are suitable for a wide range of applications. The tools are firmly connected to the telescopic rod by a practical snap connection.
Request for a quoteBÜRKLE GMBH
Germany
With the bottle holder, the sample can be taken directly into the sample bottle. An easy-to-use clamping strap holds all bottles or other containers up to 88 mm Ø. Plastic, glass or metal bottles can be filled easily and safely without having to decant the sample for transport or storage. The position of the bottle holder can be set at different angles so that samples can be taken from different depths and surface textures, even from areas that are difficult to access. The sampler is particularly suitable for taking samples from basins, tanks, shafts, open bodies of water, etc. Sample depths of up to 6 m can be reached with the length-adjustable aluminium telescopic rods.
Request for a quoteEDER GMBH
Germany
Deutsch: 1) Gängigste Geometrie: Rechteckig 2) Dicke [mm], Breite [mm], Länge [mm]: Dicke 2-50 mm, Breite 10-200 mm, Länge 1000-6000 mm 3) Materialien: Aluminiumlegierungen (z.B. 6061, 6082) 4) Verwendungen: Bauwesen, Maschinenbau, Möbelbau Die genauen Spezifikationen hängen von den spezifischen Anforderungen und strukturellen Bedingungen ab. English: 1) Most common geometry: Rectangular 2) Thickness [mm], width [mm], length [mm]: Thickness 2-50 mm, width 10-200 mm, length 1000-6000 mm 3) Materials: Aluminum alloys (e.g., 6061, 6082) 4) Uses: Construction, mechanical engineering, furniture making The exact specifications depend on the specific requirements and structural conditions.
Request for a quoteXIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
The aluminum nitride (AlN) ceramic has high thermal conductivity(5-10 times as the alumina ceramic), low dielectric constant and dissipation factor, good insulation and excellent mechanical properties, non-toxic, high thermal resistance, chemical resistance ,and the linear expansion coefficient is similar with Si,which is widely used in communication components, high power led, power electronic devices and other fields.Special spec products can be produced upon requests. Product Features: 1.Uniform microstructure 2.High thermal conductivity* (70-180 Wm-1K-1), tailored via processing conditions and additives 3.High electrical resistivity 4.Thermal expansion coefficient close to that of Silicon 5.Resistance to corrosion and erosion 6.Excellent thermal shock resistance 7.Chemically stable up to 980°C in H2 and CO2 atmospheres, and in air up to 1380°C (surface oxidation occurs around 780°C; the surface layer protects the bulk up to 1380°C).
Request for a quoteXIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
Hexagonal Boron Nitride has a microstructure similar to that of Graphite. In both materials this structure, made up of layers of tiny platelets, is responsible for excellent machinability and low-friction properties. we called hexagonal boron nitride (HBN) or white graphite. Boron nitride can be long-term used at 1800 degrees under vacuum atmosphere. With gas protection, Boron Nitride can be used at 2100°. Boron Nitride is with high thermal shock resistance, no cracks under extreme cold & high temperature. If you take out Boron Nitride from 1000 degree furnace and colding it within short minutes. It still won't break even repeat this test with 100 times. Material Properties: * High thermal conductivity * Excellent thermal shock resistance * Low thermal expansion * Exceptional heat resistance * Good Chemical Inertness * High electrical resistance * Low dielectric constant and loss tangent * High volume resistivity * Excellent machinability
Request for a quoteXIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
Aluminum Oxide Ceramic is wildely used in many fields including mechanical, electronics, electrical, semiconductor, automotive,textile, etc. For the good propertities, more and more customers choose Alumina ceramic materials for their applications. Alumina Ceramic can be made to Ceramic Nozzles, Ceramic Sprayers Cyclones, Ceramic Linings, Milling Systems, Ceramic Thread guides, etc.Customized designs are very often to be made. Alumina Ceramic Properties: 1. Good electrical insulation 2. Moderate thermal conductivity 3. High corrosion and wear resistance 4. Good gliding properties 5.High mechanical strength 6. High compressive strength 7. High hardness
Request for a quoteGLOBAL GASES GROUP THAI CO LTD
Thailand
MAPP Gas & Hard Torch SetThis series of portable welding gun is suitable for red welding joints Between various non-ferrous metals, and for melting welding between similar non-ferrous metals with low melting point (such as aluminum + aluminum, brass + brass jcintsi; for rod welding between ferrous metals, and welding joints composed of ferrous metals and non-ferrous metals, selecting appropriate rod materials and flux can also obtain good rod welding joints. Commodity characteristics: 1. Safe, convenient, professional and concise. 2.The combustion temperature of.HT MAPP GAS can reach above 1250 C without oxygen and combustion. 3.HT MAPP CAS is a patent formula gas for mixed gas. 4. Diameter 75mm. high 267mm for single hand welding, easy to carry. S.Scientific mixing ratio, good flame characteristics, so as to ensure the welding effect and shorten the working time. 6. Under normal working conditions, it can achieve continuous combustion time of 2 hours and 30 minutes.
Request for a quoteMING XIAO MANUFACTURING CO., LTD
China
Ming Xiao Mfg is a professional machined parts supplier from China,we can produce aluminum machined parts from aluminum bar,aluminum extruded profiles,aluminum tubes,rough parts of die castings, All commonly used aluminum alloy can be processed, if you want the aluminum alloy Number is not routinely supplied, as long as the quantity is enough, we can provide customized services. Aluminum Turned Parts Item: Aluminum turned parts, Aluminum connecting rod Materials: Standard Aluminums,such as AL2024,AL5052,AL6061,AL6063,AL6082,AL7075… Finish:Anodizing,chemical cleaning Technics: Aluminum Forging,CNC Lathe turning,Milling,Knurling,threading China Metal Parts manufacturer custom produce Aluminum turned parts according to customer’s drawing or samples. If you are interest in our CNC Lathe turning services produce your aluminum parts, please don’t hesitate to contact us.
Request for a quoteMING XIAO MANUFACTURING CO., LTD
China
China Aluminum Turned Parts manufacturer custom produce Aluminum parts by CNC turning & milling according to customer’s drawing or samples. Item: Aluminum turned parts, Aluminum connecting rod Materials: Standard Aluminums,such as AL2024,AL5052,AL6061,AL6063,AL6082,AL7075… Finish:Anodizing,chemical cleaning Technics: Aluminum Forging,CNC Lathe turning,Milling,Knurling,threading We provide precision CNC turning & Milling Services for producing Aluminum turned Parts for all industries,as long as you can provide detailed drawings and requirements, we can get back to you within two working days. Producing Aluminum turned parts is our specialty, If you have any Aluminum turned Parts need to be customized in China,Welcome contact us to discuss about your projects.
Request for a quoteResults for
Aluminium rods - Import exportNumber of results
37 ProductsCountries
Company type
Category