Air treatment - Import export

The air handling unit (AHU) is a small piece of equipment for the simple treatment of air in small environments. It is usually composed of a single chilled water and hot water heat exchange coil, both for cooling and heating, or of a direct expansion coil in which the refrigerant gas circulates. Evaporation takes place in the coil itself within the rooms of use by an air filter and a low head suction/delivery fan. For this sector, our company deals with the production and sale of copper and iron pipes which can be semi-finished or assembled suitable for different purposes, including: Air exchange, Air purification, Humidity control

"What Mikropor offers you with MKE SERIES: - Low pressure drop saves compressor power - Quick start and reaction time provides additional production time - Every dryer is specially designed with the right components to consume the lowest energy - Highly energy efficient and environmentally friendly R134a refrigerant across all models. - R513a refrigerant is optional. - A state-of-the-art heat exchanger design provides the highest cost saving in the industry - Best in class refrigerant compressors consume less energy against competition dryers - Pressure switches control the condenser’s fan motor for saving energy and letting the system operate at desired conditions - This is not only a dryer, but an air treatment package that delivers an air quality of class 1.4.1 as per ISO 8573:2010 due to integrated filtration"

The energy costs of a compressed-air system are decisively influenced by the pressure drop occurring during compressed-air filtration. To maintain the required operating pressure, this pressure drop needs to be compensated by correspondingly higher compressor performance. The consequence: increased energy demand, premature wear of the compressor ... and therefore higher costs. The better solution: CLEARPOINT compressed-air filters by BEKO TECHNOLOGIES.

Dampers play a crucial role in the functionality of industrial ductwork as they are designed to control the flow of air or flue-gas within the ducts. The primary purpose of most dampers is to act as shut-off dampers. This means they are either fully open or fully closed depending on the operational requirements. However, some dampers are specifically installed to modulate the gas flow, allowing them to function in various partially open positions. The variability in damper functionality caters to different operating scenarios and provides flexibility in managing the flow of air or flue-gas through the duct system.

Pressure gauges for maintenance units, pressure regulators and control panel installation, Fastening elements, linking accessories and brackets, containers, drainage valves, control magnets, Spare parts for compressed air treatment equipment

A double head mitre saw with disappearing blades specifically studied for the tubular steel shapes. Automatic positioning of the movable unit. Electronic positioning of the cutting units on any angle within 45° and 135°. It is equipped with the system TS 690. Frontal and straight blade feed with speed adjustments. Hydro-pneumatic blade feed. Speed of rotation of the blades, variable by means of a frequency converter (inverter). Automatic shifting of the support plates of the profile once over the cutting cycle. Dynamic protection guards for a total covering of the cutting area. Blade lubrication cooling system with electric pump. Coolant liquid vat with extractable pump for vat cleaning. Cutting deepth stop device. Intermediate workpiece support automatically operating Mobile roller conveyor with pneumatic clamp for section support Compressed air treatment unit (filter/reducer/lubricator)

The search for solutions in the field of process engineering systems and methods presents us with new challenges every day. Electric heaters for the direct thermal treatment of incoming air in air conditioning systems or as preheater or afterburner for intake air in industrial equipment using intelligent processadapted control systems are gaining an increasing acceptance

WIWOX® 340 is a weakly alkaline cleaning agent for grease, oil and oil carbon soiling. Very suitable for pre-cleaning or basic cleaning of soiled steel, cast iron and non-ferrous metal or plastic parts in an ultrasonic bath or in a spray cleaning system. After cleaning and without water rinsing, the parts are temporarily protected against corrosion. The final drying can be accelerated by blowing off with compressed air, a warm air flow or treatment in a drying cabinet. WIWOX® 340 can be used in a concentration of 5 – 7 %. Dilution with water depends on the degree of contamination and the intended exposure time. The bath should have a temperature of approx. 60° C. The bath should be kept at a constant temperature. In the field of precision mechanics, longer exposure times are possible depending on the degree of contamination.

"It is highly crucial to have clean and dry air in the system to have profitable and efficient manufacturing worldwide. Mikropor MMD-VP Series Modular Vacuum Purge Heatless Desiccant Air Dryers remove water vapor from compressed air, stop corrosion, and inhibit the growth of micro-organisms in critical applications. Mikropor MMD-VP Series Modular Vacuum Purge Heatless Desiccant Air Dryers supply high-quality dry air which has -40 °C dew point or optionally -70 °C dew point to the system with affordable prices and reliable way. In that way, the production machine has a longer life, minimum maintenance costs, and processed product is produced in a healthy and safe way. The new vacuum purge technology decreased air loss during the regeneration process and make the production more cost-efficient way."

"This design achieves a hyper-efficient 100% contact between the air and refrigerant circuits, delivering state-of-the-art performance and great cooling efficiency. The state-of-the-art 3-in-1 design features very low differential pressure delivering significant energy savings. The 3-in-1 Heat-Exchanger is compact and allows the dryer to be smaller and reduces the space required for the dryer. Mikropor offers a variety of 3-in-1 dryers equipped with the 3-in-1 Heat-Exchanger to meet a full range of capacity and power requirements."

"Mikropor is proud to announce that the new MK-DS series explicitly prevails over any other type of refrigerated air dryer by achieving everyone’s goal to lower energy costs. The MK-DS Series, with a specially designed heat exchanger and digital scroll compressor, provides unrivalled energy efficiency in a refrigerated air dryer. The challenge of maintaining a stable dewpoint and saving energy can be overcome with this latest technological development. Combining Mikropor’s expertly designed heat exchanger, leading filtration technology and digital scroll compression in Mikropor’s MK-DS dryers provides the ultimate energy efficiency solution for compressed air systems with varying levels of air demand."

"Most compressor manufacturers do not use an aftercooler on their piston type compressors. Therefore compressed air exits the compressor at about 100°C temperature. Mikropor's High Temperature Dryer has an aftercooler to reduce the inlet temperature."

Mikropor MDA Heatless Desiccant Air Dryers provide constant -40⁰C (-70⁰C Optional) pressure dew point.These dryers are designed to supply clean and very dry compressed air for critical applications. Pre-filters and after-filters are standard on all Mikropor Heatless Air Dryers to keep the air stream clean and maintain the integrity of the desiccant medium. A very reliable electronic controller is utilised so the dryer operates perfectly through its service life. MDA Heatless Desiccant Dryers are equipped with special valves and high quality desiccants in order to assure performance and provide the lowest pressure drops available in the market.

Cycling refrigerated dryer design helps you achieve optimal performance at a lower cost compared to a Digital Cycling design.To reduce energy consumption, the dryer refrigeration system automatically deactivates during periods of low load and features a patented heat exchanger and thermal mass circuit.MCY Series Air Dryers are highly reliable, efficient, have small space requirements and offer low cost ownership. Integration of pre / post filtration within the dryer cabinet saves labour time, installation cost and valued production space. The compact size also offers flexibility and economy during transportation.

With over 30 years of experience Mikropor manufactures the best performing replacement elements in the industry. Mikropor offers four layers of Superior Protection-from 1 micron to 0.01 micron. Durable element construction and an efficient drain layer ensure continued performance with optimal element change periods.Additionally, High efficiency Micro-Glass nanofiber media (80 times finer than Cellulose Fiber) delivers higher targeted efficiencies, longer service life, wide chemical and synthetic lubricant compatibility even at extreme working temperatures.Mikropor assures that the replacement elements perform equal to or better than the original elements. Replacement elements have been designed and tested in ourstate-of-the-art test laboratories.

A centrifugal blower and high efficiency heater eliminate the use of valuable compressed air for desiccant regeneration.The completely automatic drying system uses blower to pull ambient air and pass it through the heater. This hot air stream flows opposite to drying flow direction. Hot air above 200⁰C regenerates the moisture inside desiccant bed and strips it completely of all moisture. The advanced control system monitors the dew point and adjusts the heating/regeneration accordingly thereby providing valuable energy savings.

"The light weight modular design desiccant dryer series brings a new concept in compressed air technology, offering total installation flexibility to meet specific needs. Mikropor’s Modular Desiccant Dryers are less than half the weight and size of a traditional twin tower design, allowing even the largest models to be easily moved through a standard doorway. Mikropor’s innovative Modular Air Dryers make it easier and more affordable than ever to deliver high-quality compressed air for virtually herever it’s needed. Mikropor Modular Desiccant Dryers have cosmetic beauty and can be located in clean, pleasant environments eyesore. Offered in sizes from 5 m³/h to 400 m³/h with dew point of -40°C to -70°C (optional) these dryers are equipped with everything you need, requiring only air inlet/outlet connections."

Eurovent certified MVX Series, are fully potted filters which make it the ultimate choice for gas turbine applications. These filters combine energy savings with a high surface area. With efficiency options ranging from M6 to F9 & ISO ePM10/ISO ePM1.

Introducing the MVHHT Series: High-temperature filters built to withstand the heat. Crafted with micro glass fiber media and separator, available in stainless steel or galvanized steel frames. Resilient up to 250 degrees, these filters are essential for air conditioning systems and industrial processes. "

MVH Filters are available with galvanized steel, aluminium or stainless steel frame. They are suitable for air conditioning systems in hospitals, laboratories and museums and Industrial processes such as pharmaceutical, food and microelectronics.

Introducing MV4HT, V-Bank type high-temperature filter. Crafted with a galvanized steel frame and microglass fiber media, it offers M6 to F8 efficiency. The high-temperature gasket ensures resilience up to 350 degrees, making MV4HT the optimal choice for demanding applications in the automotive industry

Introducing the MV Series, a V-Bank type filter designed for superior air quality. With a plastic frame and microglass fiber media, it spans from M6 to F9 efficiencies or ISO ePM10 / ISO ePM1. Ideal for HVAC, cleanrooms, and air purification from smokes to pollens. MV Series offer a compact design, high surface area, and energy-saving efficiency. The V product line ensures compliance with VDI 6022, assuring top-notch performance and reliability.

Mikropor V-BANK type carbon series is engineered to effectively eliminate airborne particles and address a broad spectrum of odors under high air flow conditions.

MTF-H SERIES Filters are constructed using Micro Glass Fiber. Simply, there is no better performing filter media available to meet the flow performance requirements and high efficiency filtration needs for turbo machinery.

MSKP Series – a G4 efficiency pre-filter for HVAC systems. Crafted with a galvanized steel or stainless steel frame, it offers flexibility to meet diverse customer needs. These filters are not only light and rigid but also have a low initial pressure drop, ensuring optimal performance in air filtration.

MPS Fine Series – HVAC filtration. With synthetic media and a robust galvanized steel frame, these filters offer efficiency between M5-F8, durability, and low initial pressure drop. Upgrade your HVAC for cleaner, healthier air.

Introducing the MPR Synthetic Media Filter – a high-performance solution for diverse air filtration needs. Crafted with a molded plastic frame and synthetic media, it achieves efficiency levels from G4 to M6. Ideal for automotive, gas turbines, and general ventilation in offices, industrial, food processing, and labs. Boasting a low initial pressure drop, high dust-holding capacity, and a rigid self-supporting design, it ensures durability and energy efficiency. Plus, it's incinerable, aligning with eco-friendly practices. Upgrade to MPR for reliable, efficient filtration in various applications.

MPG Filters are fine filters with glassfiber media and galvanized steel frame. They are available between M5-F8 efficiency (EN 779:2012) / ISO ePM10 - ISO ePM1 (ISO 16890). They are suitable for HVAC and pre-filter of absolute filters applications.

MPF filters are mini pleated filters with metal, plastic or cardboard frame. They are available between M5-F9 (EN 779:2012) efficiencies / ISO ePM10 - ISO Epm1 (ISO 16890). . These filters offer high surface area with low energy use which make them optimal choice for HVAC applications.