Air point - Import export

Introducing our exquisite Pinky Diamond Signet Ring, a timeless masterpiece that seamlessly marries traditional craftsmanship with contemporary design. Expertly fashioned in your choice of premium gold or sterling silver, this ring is the epitome of elegance and sophistication, tailor-made for business-to-business clientele seeking unique, high-quality jewelry. The face of the ring boasts a flawless, round-cut diamond at its center, handpicked for its brilliance and luster. Surrounded by intricately engraved patterns, the gemstone serves as a radiant focal point, imparting an air of refined luxury. The ring's robust signet design makes a bold statement while maintaining a classic appeal, thanks to its polished finish and meticulous detailing. Built for longevity, each ring undergoes rigorous quality control measures to ensure durability, making it a perfect heirloom piece.

This Hygrostick 8703 is a robust, portable hygrometer for temperature, air humidity and dew point measurement. LESS THAN HALF PRICE !!

This Hygrostick 8703 is a robust, portable hygrometer for temperature, air humidity and dew point measurement. LESS THAN HALF PRICE !!

This Hygrostick 8703 is a robust, portable hygrometer for temperature, air humidity and dew point measurement. LESS THAN HALF PRICE !!

This Hygrostick 8703 is a robust, portable hygrometer for temperature, air humidity and dew point measurement. LESS THAN HALF PRICE !!

The Trotec PC200 Particle Counter features 6 measuring channels (0.3, 0.5, 1.0, 2.5, 5.0 and 10.0 μm) with three counting modes (concentration, cumulative and differential) and counting efficiency of 50% at 0.3 μm and 100% for particles beyond 0.45 μm. The internal pump allows flow rate of 2.83 l/min (0.1 ft³/min) and the zero count is < 1 particles / 5 min with a coincidence loss of 5%, 2 million particles per ft³ (28.3 liters). The Laser class 3B with wave length of 780 nm and 90 mW is used as a light source while isokinetic probes serve as sample inlet. The device can be used to easily acquire readings on air temperature, humidity, dew point temperature and wet-bulb temperature.

Stainless steel refrigerated 40 bar air dryer with the plate heat exchanger, moisture separator, interconnecting piping and flanges, all made from stainless steel to prevent corrosion. Refrigerant gas is ozone friendly R134a or R404a. Dust pre-filter providing 1 micron filtration and integrated in the air dryer. Dew Point Alarm -option- displayed on compressor control panel and on dryer unit to help maintain the quality and security of the air supplied for blow moulding. Condenser is air cooled, but water-cooling is available on request for hot areas over 40°C. Coolant compressor is fully hermetically sealed with current and thermal overload protection. Pressure dew point is 3°C with 35°C compressed air inlet temperature. See our certifications

B-AIR™ point of use filter set is designed for high efficient preparation of top quality breathing air. On request B-AIR™ filter set can be supplied with wall mounting brackets, pressure regulator and quick couplings. WARNING! Breathing air filter set B-AIR is not declared as CO₂ and CO removal filter. Despite that B-AIR comprises filter element which can reduce CO content.

COM-Dry dryers have been designed for continuous separation of water vapour from compressed air thus reducing dew point. Drying consist of two steps. Refrigerant dryer first eliminates large majority of water and reduces dew point down to PDP +3°C. Further reduction of dew point is carried out by adsorption dryer. Operation of dryer is more simple compared to conventional heat regenerated adsorption dryer while average compressed air losses present only up to 4,6 %.

X-DRY 300-1050 modular adsorption dryers are designed for continuous separation of water vapour from compressed air thus reducing dew point. Operation of dryer requires two columns operated alternately. Adsorption takes place under pressure in first column while second column regenerates with a portion of already dried compressed air at ambient pressure. A dryer consists of two columns, filled with desiccant beads, controller with LCD display, valves, manometers, support construction and suitable filter housings with the required filter element. Proven robust design enables efficient and reliable operation, fast installation and simple maintenance.

Desiccant adsorption compressed air dryer A-DRY has been designed to separate water moisture from compressed air thus reducing the dew point in the system. A-DRY is a range of products offering our customers a wide array of dried air solutions with volumetric flow rates ranging from 6 Nm³/h to 200 Nm³/h. An innovative new design of desiccant adsorption dryer A-DRY, developed with consideration of our customers, enables fast and reliable installation, use and servicing. Installation is simple with our ready to use controller while minimising the number of parts and motions required for assembly and disassembly makes servicing fast and reliable.

Refrigeration dryers RDT have been designed to effectively separate water from the compressed air thus lower pressure dew point all the way down to +3 °C. The main difference between RDP and RDT series is that RDT has timer controlled drain instead of an automatic drain. Drying is achieved on the principle of cooling which takes place inside a highly efficient and ultra-compact 3 stage heat exchanger. In the first stage (air-air heat exchanger) hot and humid inlet air is being pre-cooled by the cold outgoing air. In the second stage (air-refrigerant heat exchanger) intensive water condensation takes place due to the cooling of the air. All condensed water is separated from the main compressed air stream in the third stage by the integrated demister. A proven and robust design enables efficient and reliable operation, fast installation and simple maintenance.

Refrigeration dryers have been designed to effectively separate water from the compressed air thus lower pressure dew point all the way down to +3°C. Drying is achieved on the principle of cooling which takes place inside highly efficient and ultra-compact 3 stage heat exchanger. In the first stage (air-air heat exchanger) hot and humid inlet air is being precooled by the cold outgoing air. In the second stage (air-refrigerant heat exchanger) intensive water condensation takes place due to cooling the air. All condensed water is separated from the main compressed air stream in the third stage by the integrated demister. A proven and robust design of refrigeration dryers enables efficient and reliable operation, fast installation and simple maintenance.

R-DRY heat regeneration adsorption dryers are designed for continuous separation of water vapour from compressed air thus lowering the dew point. R-Dry dryers have two columns that operate alternately. Adsorption takes place under pressure in the first column while the second column regenerates. A proven and robust design enables efficient and reliable operation, fast installation and simple maintenance.

Air cooled aftercoolers series ACA are designed to reduce compressed air temperature and water vapour dew point in compressed air system. High efficiency axial fan forces ambient air over the heat exchangers copper tubes supported by aluminium fins, which provides the necessary cooling effect. The compressed air is cooled down to approximately 10°C above ambient temperature. ACA aftercoolers ensures the maximum performance and protection of all equipment, such refrigeration dryers, adsorption dryers and filters, positioned downstream of this unit.

PICO-DRY adsorption dryers are intended for separation of water vapour from compressed air thus reducing dew point. Those dryers were specifically designed for piston compressors with relatively small duty load (frequent start and stop). Adsorption takes place under pressure in the lower column. When the compressor stops the adsorption column is depressurised and the dry air from the buffer vessel is slowly expanded and used for regeneration. Dryer is equipped with aftercooler as well as with filter making sure that liquid water, oil and other large contaminants will not enter adsorption vessel. Springs in the columns make sure that the desiccant beads will not move during operation. Proven robust design enables efficient and reliable operation, fast installation and simple maintenance.

HP-DRY high pressure adsorption dryers have been designed for continuous separation of water vapour from compressed air thus reducing dew point. Operation of the dryer requires two columns operated alternately. Adsorption takes place under pressure in the first column while the second column regenerates with a portion of already dried compressed air at ambient pressure. High pressure adsorption compressed air dryer consists from control valves, controller with LED display and two columns filled with desiccant. Springs in the columns make surethat the desiccant beads will not move during operation. Proven robust design enables efficient and reliable operation, fast installation and simple maintenance.

The high voltage at both emitter points is current limited. Being installed outside the air flow, the high-voltage points are hardly subject to fouling, if at all. The nozzle blowoff force is high at a relatively low air consumption. Features - Working distance: 250 mm max. - Air consumption: 3,5 Nm3/h using 1 bar - Max. pressure: 7 bar - Shockless touchable emitters - Being installed outside the air flow, the emitter pins are hardly subject to fouling, if at all - Can be fitted on a standard air header - Click system for easy assembly

The waveguide dehydrator is a crucial element of any communications waveguide system, be it a microwave, radar, TV satellite terrestrial or antenna system. This high-capacity waveguide dehydrator for location in both ETSI and standard 19” racks, has reversible mounting brackets allowing the same unit to fit within either enclosure without any further need for mounting brackets or plates. Whether you choose the 230vAC or the 48vDC variant, the 12446 boasts an impressive output of over 220 litres per hour at an excellent dewpoint of -40ºC. The unit comes with 2 fixed output pressure options of either 15 or 40 mbar, and 6 off ¼” pneumatic outlets as standard. Despite its physical dimensions, the 12446 houses a high capacity, high pressure air storage vessel which allows the unit to remain inactive for extended periods of time, keeping maintenance requirements to an absolute minimum. Dry air delivery: 8 ft3/hr Dry air dew point -40c Output pressure 0.2 – 6 psi

Our bespoke global shipping solutions enables the shipper to provide comprehensive, planning, control and monitoring of the entire supply chain to ensure the smooth flow of goods. This includes the movement and storage of raw materials and finished goods from point of origin to marketing points by air, sea and road. Port Centric Logistics As part of a UK warehousing network, we have access to warehouses situated near ports is to offer customers port centric logistics solutions to deal with any storage needs required within the supply chain process. Transportation With our transport operation knowhow BECO & ASSOCIATES GLOBAL, offer container and trailer trucking services within the logistics sector to a range of customers and end-to-end services that operate through Europe with an up to date compliant fleet across borders. Our fleet of trailers adhere to legal weight limits and consist of sliding skeletal capable of carrying all container sizes, taut liners as well as flatbeds.

LUXOR A series dryers with ETA-process® and ETA plus® energy saving technology are specifically designed for supplying dried plastic granulate for many different plastics processing applications. They have either two or three fully insulated stationary desiccant beds with separate process and regeneration blowers which provide consistently low dew-point air to the process, while reducing energy consumption. The advanced LUXOR A series consists of ten models with drying capacities from 80 to 2400 m3/h. Each advanced system dryer can be flexibly combined with all LUXORBIN A drying bins from 15 to 2400 litres. In addition, motan offers a range of extra-large drying bins with volumes from 3,000 to 13,000 litres. These are also available with gas heating. All motan system drying bins are made of stainless steel, are completely insulated, and have individual heating as well as temperature control.

Both the LUXOR E A and LUXOR EM A dryers with optional ETA plus® energy saving technology are specifically designed to supply consistently low dew-point air to one drying bin, while reducing energy consumption. The LUXOR E A dryer is designed for use with existing conveying systems or hopper loaders. Whereas the LUXOR EM A offers a machine dedicated solution with integrated dry air conveying for up to two processing machines and the drying bin. There are three sizes with drying bin capacities of 60, 100 and 150 litres. The LUXORnet controls utilise modern, flexible BUS-technology. As standard, the colour touch control manages the dry air generator, one drying bin and with the EM version, material conveying to one drying bin and two processing machines. The integration of dry-air conveying and material proportioning provides maximum flexibility and productivity.

The COMBI dryer with hot-air blower dries clothing inside with the help of tubes. Additionally, special nozzles are fixed to the tubes that dry clothing from the outside as well, and consequently the complete drying time is reduced significantly. Thanks to TOP TROCK – air swirling is directly supplied to inner problem areas (shoulders, armpits, back). Through the V-shaped inner hanger clothing is ventilated inside with warm air at all critical points. Additionally, drying is ensured outside by nozzles in frame tubes. Positive side-effect of the intensive drying is a higher confidence of employees. Warm clothing can significantly reduce the level of sickness. Moreover, the lifetime of dried clothes is extended to twice – three times. The hot-air blower can be equipped for 3 – 8 persons. Technical data: TOP TROCK hot air blower GF 900 230 volt ~ 1300 watt Guarantee of 2 years or 5000 operating hours TOP TROCK hot air blower complies with Machine Safety Code CE- and TÜV...

TOP TROCK drying cabinet with hot-air blower is ideal suited for short term drying time. Clothing is dried from the inside and outside. Therefore, additional nozzles are installed to tubular frame, which supply quick and gentle outside drying of clothing. Through the V-shaped inner hanger clothing is ventilated inside with warm air at all critical points. Additionally, drying is ensured outside by nozzles in frame tubes and by air swirling in cabinet. Thanks to TOP TROCK – air swirling is directly supplied to inner problem areas (shoulders, armpits, back) Positive side-effect of the intensive drying is a higher confidence of employees. Warm clothing can significantly reduce the level of sickness. Moreover, the lifetime of dried clothes is extended to twice – three times Drying cabinets are available in sizes for five up to eight persons. Technical data Top Trock hot air blower GF 900, 230 volt ~ 1300 watt 2 years or 5000 operating hours guarantee for hot-air blower Guarantee...

The RH1 air thermo- hygrometer is an easy-to-use device for the rapid determination of the relative and absolute air humidity as the dew point temperature of the surrounding air. In addition, by storing the device at wood or paper, the equilibrium moisture content (EMC) and the water content in the material can be determined. At the same time the current temperature - optionally in °C or °F - is displayed by each measurement. The measuring range of the RH1 thermo- hygrometer is between 0 and 100% relative humidity at a resolution of 0.1%. The calibrated measurement range, in which the measurement is within the defined tolerance limits, ranges from 10% to 90% of the relative humidity, where the accuracy of ±1.5% of relative humidity (at 25 ° C) is reached. The temperature measurement range is from -10 to +60 ° C or 14 to 140 ° F, at a resolution of 0.1 ° C. The accuracy is ± 0.4 ° C.