Air duct - Import export

The air duct is made of sheet metal construction. It is possible to make the desired air setting with air valves. Thanks to the mica glass, the cleaning process of the product can be clearly seen. The air duct is used to separate foreign substances that are lighter than the product with the help of air. It is mounted in front of the garbage separator and at the outlet of the peeler. The feeding table located at the product entrance ensures homogeneous goods flow throughout the channel. The rear curtain, which is moved throughout, allows the duct cross-section to be adjusted as desired by means of adjustment bolts. This precise adjustment of the air speed in the duct ensures that the light substances in the grain passing through the duct are separated in the desired amount.

DETAILS General Features: We provide ventilation with our own production snail fans using polypropylene material . Technical Specifications: Areas of Use:

Company produce flat ventilation system that is easy to mount and hide in wall as well in ceilings. The flat ventilation ducts are made of galvanized sheet metal, heat and damp resistant.

A J Services manufacture a range of access doors which has been designed in order to gain safe access to to ducting for the inspection of elements and routine cleaning. The access doors are manufactured in galvanised steel but can also be made in 304 & 316 stainless steel as well as aluminium ranging in size from 50mm to 2000mm and produced in a variety of styles: tabbed, flat oval, spiral/circular and pressed access doors. All with a depth of either 25 or 50mm depth and can include additional safety features such as chains.

AJS supply the highest quality fittings and fixtures needed to complete a full heating, ventilation and air conditioning system. All products are supplied are manufactured by reputable companies who we have built a solid working relationship with and are safe in the knowledge that all products supplied by AJS will be safe and meet all specifications set by regulations such as HVAC DW144. Duct fixtures and fittings stocked include spiral tubing T & Y pieces, bends, branch saddles, cap ends, flanges and couplers to manage the air flow through the ducting and connecting elements of ducting systems.

Material: Galvanized, Stainless and Aluminum Diameter: 0.50-1.20mm l:1200/1500mm Insulation: Rubber sheet (inside/outside) Coating: In desired paint codes Production : Full sealing with mastic in fully automatic machines Joining : 20/25/30 mm with self-flange and drive-in flange

Material: Galvanized, Stainless and Aluminum Diameter: 0.50-1.20mm l:3000/6000mm Insulation: Rubber sheet (inside/outside) Coating: In desired paint codes Production: In automatic machines Joining : Flanged 30/40/50 mm

Multiple shapes and forums, insulated or painted.

Electrostatic powder coating is a solvent-free surface coating method. The coating material is very fine powder paint particles that make up the top coat layer. Powder paint is thrown in the paint booth by means of special spray guns. Electrostatically charged powder paint particles while passing through the gun adhere to the material to be painted in the cabinet and the coating process is realized. The result is a very durable, economical, environmentally friendly, wide color range and glossy surface coating. Solvent-free, surface quality, durability, paint recovery system, economy and environmental sensitivity make electrostatic powder coating a more attractive alternative to traditional painting processes. Dyeing can be done according to the desired Ral code.

Technical Information and Dimensions: Material: Steel, Coating: Electrogalvanized Code: KGJN061000 Rod Size: M.6 x 1.000 mm Design Load: 1,10 kN Code: KGJN062000 Rod Size: M.6 x 2.000 mm Design Load: 1,10 kN Code: KGJN081000 Rod Size: M.8 x 1.000 mm Design Load: 2.25 kN Code: KGJN082000 Rod Size: M.8 x 2.000 mm Design Load: 2.25 kN Code: KGJN101000 Rod Size: M.10 x 1.000 mm Design Load: 3.29 kN Code: KGJN102000 Rod Size: M.10 x 2.000 mm Design Load: 3.29 kN Code: KGJN121000 Rod Size: M.12 x 1.000 mm Design Load: 4.81 kN Code: KGJN122000 Rod Size: M.12 x 2.000 mm Design Load: 4.81 kN Code: KGJN141000 Rod Size: M.14 x 1.000 mm Design Load: 6.84 kN Code: KGJN142000 Rod Size: M.14 x 2.000 mm Design Load: 6.84 kN Code: KGJN161000 Rod Size: M.16 x 1.000 mm Design Load: 9.18 kN Code: KGJN162000 Rod Size: M.16 x 2.000 mm Design Load: 9.18 kN Code: KGJN181000 Rod Size: M.18 x 1.000 mm Design Load: 11.52 kN Code: KGJN182000 Rod Size: M.18 x 2.000 mm Design Load: 11.52 kN

Channels are available in C L and U shapes in different dimensions

Adapts to high load and is a robust.product. Standard galvanized coating. Code: GMAXK Dimensions: 37x19x27 mm Sheet Thickness: 2 mm Ø: 7 mm Weight: 24.5 gr Package: 500 Pieces Code: GMINK Dimensions: 31x16x25 mm Sheet Thickness: 2 mm Ø: 7 mm Weight: 19.5 gr Package: 500 Pieces

Dimensions: Material Type (HRP, DKP), Coating Type: Electro Galvanized, Material Thickness: 2 mm Code: KRSK20 Type: 1 WxW1: 66 mm H: 15 mm Ø: RxR1xR2: 9x6x6 mm Code: KRSK25 Type: 2 WxW1: 85 mm H: 20 mm Ø: RxR1xR2: 9x6x6 mm Code: KRSK30 Type: 3 WxW1: 105 mm H: 24 mm Ø: RxR1xR2: 9x6x6 mm Code: KRSK35 Type: 4 WxW1: 106 mm H: 29 mm Ø: RxR1xR2: 10x6x7 mm

Material: Galvanized Sheet, Length: Standard 4 meters, Packing Type: 1 Tie (100 meters) Code: KPRF20 Type: 1 Dimensions (HxWxH): 20x28x0,65 mm Code: KPRF25 Type: 2 Dimensions (HxWxH): 25x28x0,65 mm Code: KPRF30 Type: 3 Dimensions (HxWxH): 30x28x0.75 mm Code: KPRF35 Type: 4 Dimensions (HxWxH): 35x28x0.75 mm Leakage Limits: Leakage in liters per second per square meter channel surface area. Low Pressure Class: A Leakage Limit: 0.027 x p0.65 Medium Pressure Class: B Leakage Limit: 0.009 x p0.65 High Pressure Class: C Leakage Limit: 0.003 x p0.65 High Pressure Class: D Leakage Limit: 0.001 x p0.65

CA 400 P - Universal portable electric lift suitable for any vertical lifting for safe work. For the installation of cassette, air conditioning, duct or other load Load capacity 150 kg - Lift height 4 m Lightweight portable device Immediate use on site Put into action without any tools Only 2 elements: the mast and the plate With 4 individually adjustable feet Use on stairs or sloping ground Special foot kinematics for working close to the wall (UPTER system) 230 V mono electric motor Variable speed at will Integrated torque limiter Manual use possible in the event of a power failure using the crank provided

"CM 340 universal portable electric lift suitable for any vertical lifting for safe work. For the installation of cassette, air conditioning, duct, awning, pergolas or other load Lightweight portable device Immediate use on site Put into action without any tools Only 2 elements: the mast and the plate With 4 individually adjustable feet Use on stairs or sloping ground Special foot kinematics for working close to the wall (UPTER system) 230 V mono electric motor Variable speed at will Integrated torque limiter Manual use possible in the event of a power failure using the crank provided.

It is used for cleaning and classifying semolina in flour and semolina factories. The product, whose flow rate can be adjusted, is distributed evenly over the entire sieve surface thanks to a curtain. The elimination process is carried out with 2 or 3 layers of telora. With the aerodynamic air duct and air adjustment valves, equal vacuum is created on all sieve surfaces, and products with extended adhesion surfaces, such as bran and bran, are suspended by vacuum, separated from the product and pushed into the outlet channel. The bran-free product (semolina) is classified according to grain size by means of sieves.

Radial scanning machine is used to separate low density substances from high density grain products such as wheat, barley, corn and similar. Separates foreign substances such as dust, sand and small seeds in wheat. Wheat entering the machine from the wheat inlet is filled into the vibro feeder and distributed smoothly across the width of the air duct. Here, in the horizontal aspiration channel, the product is separated from low density materials through its double adjustable wall. The fan of the radial scanning machine is mounted on the main body through bearings. The outer body is made of sheet metal, and the foot part and the outlet nozzle located on the foot part are mounted on the body.

Round fireplace/ventilation grilles Round fireplace grilles are designed for supplying warm air in a gravitational or forced way, as well as for supplying or exhausting ventilation air. They are made of steel elements properly prepared in the technological process. Fireplace grilles are installed in fireplace enclosures or in walls/ceilings as the end of hot air distribution or ventilation ducts

Round fireplace/ventilation grilles Round fireplace grilles are designed for supplying warm air in a gravitational or forced way, as well as for supplying or exhausting ventilation air. They are made of steel elements properly prepared in the technological process. Fireplace grilles are installed in fireplace enclosures or in walls/ceilings as the end of hot air distribution or ventilation ducts

Round fireplace/ventilation grilles Round fireplace grilles are designed for supplying warm air in a gravitational or forced way, as well as for supplying or exhausting ventilation air. They are made of steel elements properly prepared in the technological process. Fireplace grilles are installed in fireplace enclosures or in walls/ceilings as the end of hot air distribution or ventilation ducts

Round fireplace/ventilation grilles Round fireplace grilles are designed for supplying warm air in a gravitational or forced way, as well as for supplying or exhausting ventilation air. They are made of steel elements properly prepared in the technological process. Fireplace grilles are installed in fireplace enclosures or in walls/ceilings as the end of hot air distribution or ventilation ducts

Round fireplace/ventilation grilles Round fireplace grilles are designed for supplying warm air in a gravitational or forced way, as well as for supplying or exhausting ventilation air. They are made of steel elements properly prepared in the technological process. Fireplace grilles are installed in fireplace enclosures or in walls/ceilings as the end of hot air distribution or ventilation ducts

Round fireplace/ventilation grilles Round fireplace grilles are designed for supplying warm air in a gravitational or forced way, as well as for supplying or exhausting ventilation air. They are made of steel elements properly prepared in the technological process. Fireplace grilles are installed in fireplace enclosures or in walls/ceilings as the end of hot air distribution or ventilation ducts

Round fireplace/ventilation grilles Round fireplace grilles are designed for supplying warm air in a gravitational or forced way, as well as for supplying or exhausting ventilation air. They are made of steel elements properly prepared in the technological process. Fireplace grilles are installed in fireplace enclosures or in walls/ceilings as the end of hot air distribution or ventilation ducts

Round fireplace/ventilation grilles Round fireplace grilles are designed for supplying warm air in a gravitational or forced way, as well as for supplying or exhausting ventilation air. They are made of steel elements properly prepared in the technological process. Fireplace grilles are installed in fireplace enclosures or in walls/ceilings as the end of hot air distribution or ventilation ducts

Round fireplace/ventilation grilles Round fireplace grilles are designed for supplying warm air in a gravitational or forced way, as well as for supplying or exhausting ventilation air. They are made of steel elements properly prepared in the technological process. Fireplace grilles are installed in fireplace enclosures or in walls/ceilings as the end of hot air distribution or ventilation ducts

Round fireplace/ventilation grilles Round fireplace grilles are designed for supplying warm air in a gravitational or forced way, as well as for supplying or exhausting ventilation air. They are made of steel elements properly prepared in the technological process. Fireplace grilles are installed in fireplace enclosures or in walls/ceilings as the end of hot air distribution or ventilation ducts

Round fireplace/ventilation grilles Round fireplace grilles are designed for supplying warm air in a gravitational or forced way, as well as for supplying or exhausting ventilation air. They are made of steel elements properly prepared in the technological process. Fireplace grilles are installed in fireplace enclosures or in walls/ceilings as the end of hot air distribution or ventilation ducts