Air bed - Import export

Mitadaf is an innovative dissolved air flotation system. Its exceptional solid/liquid separation and/or sludge thickening efficiency is the result of the combined systemof uniform hydrodynamics and filtration with a bed of micro air-bubbles: an equipment of new concept developed by MITA. The heart of the mitadaf system is the multifunctional central column, by means of which the raw sewage is introduced into the tank, the clarified effluent water is recovered and the sludge exits. The raw influent water, suitably saturated with air, is introduced into the flotation tank via a series of holes located in the lower part of the central column. The entering mix, propelled by the micro-bubbles of air, immediately reaches the surface, homogeneously distributed across the whole flotation area (uniform hydrodynamic system).

FRESC MANN PREMIUM portable industrial evaporative air cooolers from 5,760 to 13,511 m3/h The FRESC MANN portable industrial evaporative air cooler are ideal for cooling naturally and with low energy consumption in all kinds of work areas, event tents, heat sources, etc ... Its basic operating principle is to suck in the outside air and pass it through some panels moistened with water. Once the air passes through this panel, it cools and increases its humidity. By carrying out this process, the air is propelled inside the premises to be air-conditioned, reaching pleasant comfort temperatures and adequate indoor air quality for people. FRESC MANN PREMIUM portable evaporative air coolers develop an air bed from 5,760 m3/h to 13,511 m3/h with an available pressure at a maximum flow rate of 100 Pa.

High pressure activated carbon towers TAC HP have been developed for separating oil vapours from compressed air (dry type separation). TAC HP series is made from high quality carbon steel. Flow distributors ensure uniform distribution of air flow through activated carbon bed. Oil vapours as well as some other hydrocarbons are separated due to adsorption process. Super fine coalescing filter is required ustream TAC HP and 1μm dust filter is recommended downstream to intercept activated carbon dust.

TAC activated carbon towers have been developed for separating oil vapours from compressed air (dry type separation). TAC series is made from high quality carbon steel. Flow distributors ensure uniform distribution of air flow through activated carbon bed. Oil vapours as well as some other hydrocarbons are separated due to adsorption process. Super fine coalescing filter is required upstream TAC and 1μm dust filter is recommended downstream to intercept activated carbon dust. Stainless steel version available on request. High pressure version available on request.

A fluidised bed incinerator is the technology of choice for the combustion of many sludge streams or solid waste streams with a high moisture content. In a fluidised bed reactor, an inert material, typically calibrated quartz sand, is fluidised by blowing air through the bed. The sand bed expands and provides an ideal medium for the mixing of waste with combustion air. Because the fluidised bed is maintained at an elevated temperature, typically between 650°C and 800°C the water evaporates and volatile organic compounds mix with combustion air whilst escaping from the fluidised bed. EUROPEM fluidised bed reactors are bubbling fluidised beds with high turbulence. Different feeding systems can be supplied ranging from feeding screws and over spreader stokers to injection lances. Key Features Turbulent bubbling fluidized bed of inert material Different feeding systems for solid waste, waste liquids and waste gases Can be operated in a reducing or oxidising environment Key Advantages - Robust and flexible design to burn sludge or solid waste with high moisture content – Stable combustion process of waste with varying moisture content over time – Proven technology – Destruction efficiency over 99.99% and less than 1% carbon in the ashes – Low NOx and CO emissions possible – Flue gas treatment train needed to meet acid, heavy metal, dust and PCDD/F emission levels

Our bases have very precise technical and design characteristics, without which it is impossible to implement a correct and highly efficient rest system, which provides perfect anatomical support and air circulation. Bed - Kitas, slats for self-assembly, is supplied for mounting in a box of 18x36x205 cm, to facilitate access in the room. Its height is 33 cm, the height of the legs is 15 cm, the legs can be transparent lacquered wood or metal. Solid wood structure for stability. Furniture fabric, standard or flame retardant. Express assembly in 20 minutes, from 1 person!

Data sheet Product The “Maxi-Carbo” activated carbon filter is designed for treating effluents with high levels of Volatile Organic Compounds (VOCs). The filtering unit is characterised by a completely welded steel structure equipped with one or two vertical beds of active carbon. Carbon is loaded from above through a door, while the depleted carbon is unloaded from below through a slide gate. The particular geometrical shape permits easier and faster operation of charging and discharging of the active carbon. Operating principle The “Maxi-Carbo” activated carbon filter is suited with one or two vertical carbon beds. The air flow mixed to VOC passes through the vertical carbon bed located inside the “diamond-shape” structure. Thanks to the optimized contact time the vertical carbon bed absorbs the VOC released from the air flow. The filter is not equipped with pre-filtration and therefore any possible solid particles in the air must be treated beforehand with other filtration...