• europages
  • >
  • COMPANIES - SUPPLIERS - SERVICE PROVIDERS
  • >
  • air bearings

Results for

Air bearings - Import export

Germany

Verified by Europages

Hydrostatic bearings are characterized by practically frictionless movement. The corresponding linear guides are free from stick-slip effects and there is practically no wear on the guides. Gases (mostly air) or liquids (mostly oil) can be used as the carrying medium. Air-bearing guides are ideal, for example, for clean room applications or at high sliding speeds. If oil is used as the carrying medium, higher carrying forces can be achieved with the same size and better damping properties. Various designs are available, which can be customized at any time to meet special requirements in terms of installation space, load capacity, guide length / table diameter, drive type, position measuring system, etc.

Request for a quote

Germany

Verified by Europages

Hydrostatic bearings are characterized by practically frictionless movement. The corresponding linear guides are free from stick-slip effects and there is practically no wear on the guides. Gases (mostly air) or liquids (mostly oil) can be used as the carrying medium. Air-bearing guides are ideal, for example, for clean room applications or at high sliding speeds. If oil is used as the carrying medium, higher carrying forces can be achieved with the same size and better damping properties. Various designs are available, which can be customized at any time to meet special requirements in terms of installation space, load capacity, guide length / table diameter, drive type, position measuring system, etc.

Request for a quote

Germany

Verified by Europages

Rotoguide: Micro-jet technology with air bearings from ROTOGUIDE stands for ultimate accuracy, load-bearing capacity and robustness. Shafts and bearing parts are machined to ultra-high precision for a positioning accuracy within µm range. ROTOGUIDE units are especially suitable for highly accurate linear and rotational motion under ultra-high vacuum and for all processes with ultimate demands in terms of cleanliness and accuracy

Request for a quote

Germany

Verified by Europages

Rotospray: The air bearing rotary atomizers have been specifically designed for the paint atomization in automated paint streets. The sprayer’s micro-jets ensure finest and consistent spraying at speeds up to 70,000 rpm. Thanks to its high-performance turbine that has been aerodynamically optimized for low air consumption, ROTOSPRAY achieves an enormous performance boost. The air bearing rotary atomizer can handle high loads, making the ROTOSPRAY system especially suitable for use in robotized applications. To cater for individual requirements, the rotary atomizer is available with specific connection layouts and housing variants.

Request for a quote

Germany

Verified by Europages

In the basic version the MMC 5000 consists of a main X-axis featuring a linear air bearing (feed axis), a linear roller bearing Z-axis (infeed axis) and the milling spindle (air bearing) mounted on top of the Z-axis. The main application is face milling of optical and mechanical precision components. A Y-axis is available as an option. Another useful accessory is a second milling spindle, used perpendicular to the first one, thus allowing for the machining of two sides of a workpiece to perpendicularity in one setup. Accessories, like vacuum chucks, different milling spindles, touch probes for part thickness measurement, machine interferometers and other sensors for insitu measurement of workpiece shape and roughness, make the MMC 5000 machines an effective tool. In addition, various sensors are available for measuring of the workpiece geometry and surface quality during the manufacturing process.

Request for a quote

Germany

Verified by Europages

The MMC 600/900 is the basis for a series of machines that, via several accessories and options, can be fully customized to individual needs. In the basic version the machine consists of a main X-axis featuring a linear air bearing (feed axis), a linear roller bearing Z-axis (infeed axis) and the milling spindle (air bearing) mounted on top of the Z-axis. The main application is face milling of optical and mechanical precision components. Several accessories like a Y-axis, an A-axis and/or C-axis are available, thus expanding the range of machinable parts to
microstructures, lenticular structures, spheres, polygons and so on. Accessories, like vacuum chucks, different milling spindles, touch probes for part thickness measurement and even machine interferometers for insitu measurement of workpiece shape, make the MMC 600 and 900 machines an effective tool. Besides further accessories, there is the possibility to make customized solutions, to adapt the machine to your needs.

Request for a quote

Germany

Verified by Europages

We manufacture a large number of standard products as well as customer-specific special parts with optical surface qualities as contract manufacturing. You are welcome to get an overview in the category metal optics.You can also download all metal optics directly from our general overview or find them in our download area .In addition to such components with an optical function, we also manufacture precision parts for which a high geometric accuracy is in the foreground, such as air bearing components or micro-milled parts. With an extensive inventory of ultra-precision machines and the corresponding measuring technology, we manufacture with accuracies down to the sub-micrometer range and with roughness up to approx. 1 nm [Ra]. LT Ultra serves both single and series production. We look forward to your inquiry.

Request for a quote

Germany

Verified by Europages

To create ideal conditions in terms of rigidity and damping for multi-axis machining, the series was equipped with hydrostatic (oil) bearings. By using diamond tools, optical surface quality can be achieved on a wide range of materials like crystals, nonferrous metals and plastics, even with complex geometries. Similar to the MMC 600/900 air bearing machines, the basic setup can be equipped with various accessories. The basic setup consists of 3 linear axes and can be upgraded by additional rotary, tilt or spindle axes to 4, 5 or 6 axes. Accessories, like different spindles, vacuum chucks, palleting systems, 3D touch probes for workpiece measurement, tool changer and automated tool setting, allow an effective use of the machine. Besides further accessories, there is the possibility to develop customized solutions, to adapt the machine to your needs.Please do not hesitate to contact us.

Request for a quote

Germany

Verified by Europages

To create ideal conditions in terms of rigidity and damping for multi-axis machining, the series was equipped with hydrostatic (oil) bearings. By using diamond tools, optical surface quality can be achieved on a wide range of materials like crystals, nonferrous metals and plastics, even with complex geometries. Similar to the MMC 600/900 air bearing machines, the basic setup can be equipped with various accessories. The basic setup consists of 3 linear axes and can be upgraded by additional rotary, tilt or spindle axes to 4, 5 or 6 axes. Accessories, like different spindles, vacuum chucks, palleting systems, 3D touch probes for workpiece measurement, tool changer and automated tool setting, allow an effective use of the machine. Besides further accessories, there is the possibility to develop customized solutions, to adapt the machine to your needs. Please do not hesitate to contact us.

Request for a quote

Germany

Verified by Europages

The ultraprecision turning machine (UP-Turning machine) MTC 650 is currently our largest series machine. Our customers can machine workpieces up to 200 kg in UP quality. The travelling distances are 400 mm in the Z-axis and 650 mm in the X-axis. Workpieces with a diameter of up to 800 mm in diameter (optionally 1000 mm) can be machined. The extended X travel offers more space for additional accessories, further tool holders or special bodies/ constructions. The MTC 6500 is based on a T-shaped natural granite bed. X- and Z-axis slides, as well as the housing of the main spindle are made of granite too. Both slides and the optional B-axis use hydrostatic (oil) bearings. The main spindle features an air bearing and is mounted to the X-slide. Different vacuum chucks for workpieces of up to 800 mm (31.5’’) in diameter are available.

Request for a quote

Germany

Verified by Europages

The ultraprecision turning machine (UP-Turning machine) MTC 400 (Micro Turning Center) is designed to hold heavy weight workpieces up to 100 kg. The travelling distances of the X- and Z-axis are 400 mm and provide the machining of workpieces up to 800 mm in diameter. The MTC 400 is based on a T-shaped natural granite bed. X- and Z-axis slides, as well as the housing of the main spindle are made of granite too. Both slides and the optional B-axis use hydrostatic (oil) bearings. The main spindle features an air bearing and is mounted to the X-slide. Different vacuum chucks for workpieces of up to 800 mm (31.5’’) in diameter are available. Besides many other accessories, that make the MTC 250 an all-purpose tool, there is the possibility to make customized solutions, to adapt the machine to your needs. Please do not hesitate to contact us.

Request for a quote

Germany

Verified by Europages

The ultraprecision turning machine (UP-Turning machine) MTC 350 (Micro Turning Center) combines dynamic use with an increased work space, thus resulting in a wide range of products to be manufactured. The travelling distances of the X- and Z-axis are 350 mm and provide the machining of workpieces up to 700 mm in diameter. The MTC 350 is based on a T-shaped natural granite bed. X- and Z-axis slides, as well as the housing of the main spindle are made of granite too. Both slides and the optional B-axis use hydrostatic (oil) bearings. The main spindle features an air bearing and is mounted to the X-slide. In addition to the X- and Z-axis there is the option to have an additional linear axis. This A-axis allows to do micro milling or raster flycutting operations on the machine. Besides many other accessories, that make the MTC 350 an all-purpose tool, there is the possibility to make customized solutions, to adapt the machine to your needs. Please do not hesitate to contact us.

Request for a quote

Germany

Verified by Europages

The ultraprecision turning machine (UP-Turning machine) MTC 250 (Micro Turning Center) has a lightweight construction of the moving parts and thus enables the machine axes to be used in a dynamic mode (Slow Tool). This machine is our standard machine with the smallest footprint. The travelling distances of the X- and Z-axis are 250 mm and provide the machining of workpieces up to 500 mm in diameter. The MTC 250 is based on a T-shaped natural granite bed. X- and Z-axis slides, as well as the housing of the main spindle are made of granite too. Both slides and the optional B-axis use hydrostatic (oil) bearings. The main spindle features an air bearing and is mounted to the X-slide. Besides many other accessories, that make the MTC 250 an all-purpose tool, there is the possibility to make customized solutions, to adapt the machine to your needs. Please do not hesitate to contact us.

Request for a quote

Germany

Verified by Europages

Pneumatic cylinders according to the norm, standard or special design, completely configured ready for installation and pre-assembled with add-on parts, bearing elements, compressed air connections, position sensors or control valves according to customer specifications.

Request for a quote

Germany

Verified by Europages

In 2015 the product name was changed. The old product name was Castrol Viscotemp 2. Fully synthetic high-temperature lubricating grease Description Castrol Molub-Alloy 100-2 HT (previous product name Castrol Viscotemp 2) is a fully synthetic high-temperature lubricating grease for use at high continuous temperatures. It enables long-term lubrication of plain and rolling bearings and other grease lubrication points at high operating temperatures, high bearing pressures and aggressive environmental conditions. Application Castrol Molub-Alloy 100-2 HT is a high-temperature grease for the lubrication of rolling and plain bearings and is used in fan bearings in hot air flow, calender bearings, baking systems and continuous drying chambers as well as for overhead conveyors of painting lines that are exposed to chemical influences, as well as in cold or influence of hot water and steam. Instructions for use Temperature range: -20 °C to +220 °C

Request for a quote

Germany

Verified by Europages

In 2015 the product name was changed. The old product name was Castrol Viscotemp 2. Fully synthetic high-temperature lubricating grease Description Castrol Molub-Alloy 100-2 HT (previous product name Castrol Viscotemp 2) is a fully synthetic high-temperature lubricating grease for use at high continuous temperatures. It enables long-term lubrication of plain and rolling bearings and other grease lubrication points at high operating temperatures, high bearing pressures and aggressive environmental conditions. Application Castrol Molub-Alloy 100-2 HT is a high-temperature grease for the lubrication of rolling and plain bearings and is used in fan bearings in hot air flow, calender bearings, baking systems and continuous drying chambers as well as for overhead conveyors of painting lines that are exposed to chemical influences, as well as in cold or influence of hot water and steam. Instructions for use Temperature range: -20 °C to +220 °C

Request for a quote

Belgium

Verified by Europages

The Red Ball is a cleaning gun with Ball Technology. Meaning it has a ball where there usually is a plastic or metal tube. This allows you to use the gun with a working pressure as low as 4 bar instead of the 6-7 bar for classic cleaning guns. Furthermore, only the ball spins, and not the internal tube of the Red Ball. This keeps the internal hose free of wear and doubles its lifespan. The high-tech motor guarantees troublefree operation. Features - Ultra reliable, high-tech motor bearings assembly - Adjustable air pressure - Multidirectional compressed air inlet 360° - Operates at 4 bar instead of the minimum required 6.5 bar by other cleaning guns - An additional seal prevents dirt from being sucked into the motor - Less noisy than traditional cleaning guns - With additional thread in the lid (patented) to which our 600 and 1,000 ml bottles, can be attached - Easily removable brush

Request for a quote

Do you sell or make similar products?

Sign up to europages and have your products listed

Add my business

Belgium

Verified by Europages

Reducing your energy costs is a difficult challenge faced by many industries in today’s economy. But, it doesn’t have to be. Undetected air or steam leaks, bearing failures and electrical panel faults cost you real money. There’s a way to cut these extra expenses from your energy bill. Preserve the health of your assets with the SDT200 ultrasound detector. Hear air leaks, trend and monitor the condition of your bearings, safely inspect electrical panels and schedule repairs on your own terms, long before they shut you down – all with ultrasound technology.

Request for a quote

Germany

Verified by Europages

This spindle is designed to be very compact, yet has enough power for light grinding and milling. Also available: splash guard and counterclockwise rotation. Technical Data: Order number: 150412702 Power [W]: 200 Air consumption [l/min]: 400 Vibrations [m/s²]: < 2,5 Revolutions per minute [min¯¹]: 32.000 Engine type: Vane Exhaust air direction: Backwards Front bearing set: Paired Noise level [db (A)]: 75 Weight [g]: 365 Max. tool shank Ø [mm]: 6 Max. carbide tool Ø [mm]: 8 Fitting hose unit: 001366529 (not inclusive)

Request for a quote

United Kingdom

Fully synthetic dental oils for the maintenance and lubrication of high speed journal and ball bearings in the air turbines of dental hand tools.

Request for a quote

Germany

Conversion Super Kit Related Links Online Catalog QuickShip Program Literature Order Center Video Library Related Products DM Advantage Two-Speed Fan Drives PolarForce Two-Speed Conversion Kits DM Advantage Reman Fan Drives DM Advantage Repair Kits WindMaster Fans WM Revolution Fans WindShift Modular Fans Featuring superior components, the DM Advantage Conversion Super Kit converts a standard DriveMaster® On/Off Fan Drive to a DM Advantage On/Off Fan Drive. The kit is easy to install and includes a premium double row angular contact (DRAC) sheave bearing, an improved air cartridge seal that provide 40 percent longer life, and a long-wearing friction liner for added reliability and reduced maintenance. Like all Genuine Horton Super Kits, these kits contain everything needed to completely rebuild your fan drive. Once converted, the DM Advantage On/Off Fan Drive has the latest innovations and a fail-safe design for long-life performance. Benefits - High-performance and efficient engine cooling - Increased reliability in high-horsepower applications - Easy to install and maintain Features - The latest innovations - A premium double row angular contact (DRAC) sheave bearing - Improved air cartridge seal - Long wearing friction liner Applications - Heavy-duty trucks - Medium-duty trucks - Buses - Off-highway equipment Premium Bearing vs. Groove Hub Bearing Related Products - DM Advantage On/Off Fan Drives - DM Advantage Two-Speed Fan Drives - PolarForce Two-Speed Conversion Kits - WindMaster Plastic Fans - WindMaster Revolution High-efficiency, Hybrid-flow Fans - WindShift Modular Fans Links - DM Advantage Training - Order or View Literature - On-line Catalog

Request for a quote

Germany

Air-Engaged Fan Drives The HT/S Advantage is perfect for high run time applications. We started with a technologically advanced hub bearing assembly optimized for durability. We added a PFD (Piston Friction Disc) featuring the System Sentry®. This patented device reacts to heat build up caused by fan drive slippage or fan obstructions. When it senses excessive heat, the System Sentry releases, disengaging the fan drive before extensive damage occurs to the cooling system. Finally, we included a new air cartridge with a long-life carbon tip and double O-ring air seal to reduce the possibility of air leaks. The bearing assembly design, PFD with System Sentry, and air cartridge, combine to provide you with a premium on/off fan drive that will perform consistently under extreme conditions - exactly the sort of performance you've come to expect from Horton! Benefits - Long service life - Ideal for harsh environments - Consistent performance - Better protection against heat damage Features - System Sentry - Long-life air cartridge - Double O-ring air seal Applications - Heavy-duty trucks Related Products - Advantage Reman Fan Drives &amp; Genuine Horton Repair Kits - HT/S PolarExtreme Reman Fan Drives &amp; HT/S or S Repair Kits - WindMaster Fans - HG300 Solenoid Valves Links - Order or View Literature - On-line Catalog - HT/S Advantage Training Manual

Request for a quote

Germany

-Pneumatic tires -steel center rim with ball bearing Air-filled tires made of rubber provide excellent comfort, especially when rolling over uneven floor surfaces. Our pneumatic tires can be customized according to their wheel diameter, profile types, wheel bodies and cover thickness so that they are suitable for a wide range of diff erent applications.

Request for a quote

Poland

CMTTWV2M—an automatic balancer for turbine wheel of a turbocharger, which can be equipped with a manipulator for component loading and unloading. The machine is equipped with the latest, most costeffective milling station technology. The unique feature of the CMTTWV2M is that it can balance a wide range of turbine wheel weights—the weight range of the balancer is wider than similar machines on the market. Air bearing technology is a standard feature on the CMTTWV2M. CMTCWV2M – automatic balancer for compressor wheel of a turbocharger, which can be equipped with a manipulator for component loading and unloading. The machine is equipped with a latest cost effective milling station. The unique feature of this machine is that it can balance the widest range of weight on the market today. Air bearing technology is applied as a standard feature. CMTCWV2—a manual balancer for the compressor wheels of a turbocharger for R&D departments and small scale productions.

Request for a quote

Ukraine

Air flow 344 cbm​ - Size: 300 mm * 350 mm * 150 mm.  - The noise level – 34 dB - Device weight 1.7 kg - Speed: 3000 per minute - Power 40 W It is incredibly easy to use pedicure dust collector with adjustable stand. Height can be adjust from 320 mm to 600 mm. You can choose another colors of pillow. Dust collector has industrial air fan with antifriction bearing. Working lifespan - 50 000 hours - it is almost 6 years of continuous working! This device is highly-productive and It will suit for all manicurist with all types of volatiles. Air fan has rubber seal which blocks dust in the bag. Warranty - 12 months. For your convenience speed controller is located separately from device body. After using our device you won't see any fleck of dust!

Request for a quote

Ukraine

Air flow 344 cbm​ - Size: 300 mm * 350 mm * 150 mm.  - The noise level – 34 dB - Device weight 1.7 kg - Speed: 3000 per minute - Power 40 W It is incredibly easy to use pedicure dust collector with adjustable stand. Height can be adjust from 320 mm to 600 mm. You can choose another colors of pillow. Dust collector has industrial air fan with antifriction bearing. Working lifespan - 50 000 hours - it is almost 6 years of continuous working! This device is highly-productive and It will suit for all manicurist with all types of volatiles. Air fan has rubber seal which blocks dust in the bag. Warranty - 12 months. For your convenience speed controller is located separately from device body. After using our device you won't see any fleck of dust!

Request for a quote

Ukraine

Air flow 344 cbm​ - Size: 300 mm * 350 mm * 150 mm.  - The noise level – 34 dB - Device weight 1.7 kg - Speed: 3000 per minute - Power 40 W It is incredibly easy to use pedicure dust collector with adjustable stand. Height can be adjust from 320 mm to 600 mm. You can choose another colors of pillow. Dust collector has industrial air fan with antifriction bearing. Working lifespan - 50 000 hours - it is almost 6 years of continuous working! This device is highly-productive and It will suit for all manicurist with all types of volatiles. Air fan has rubber seal which blocks dust in the bag. Warranty - 12 months. For your convenience speed controller is located separately from device body. After using our device you won't see any fleck of dust!

Request for a quote

Ukraine

Air flow 344 cbm​ - Size: 300 mm * 350 mm * 150 mm.  - The noise level – 34 dB - Device weight 1.7 kg - Speed: 3000 per minute - Power 40 W It is incredibly easy to use pedicure dust collector with adjustable stand. Height can be adjust from 320 mm to 600 mm. You can choose another colors of pillow. Dust collector has industrial air fan with antifriction bearing. Working lifespan - 50 000 hours - it is almost 6 years of continuous working! This device is highly-productive and It will suit for all manicurist with all types of volatiles. Air fan has rubber seal which blocks dust in the bag. Warranty - 12 months. For your convenience speed controller is located separately from device body. After using our device you won't see any fleck of dust!

Request for a quote

Ukraine

Air flow 344 cbm​ - Size – 250 mm * 350 mm * 150 mm - The noise level – 34 dB - Device weight 1.7 kg - Speed: 3000 per minute - Power 40 W Manicur hood Х2 soft has not only perfect design but also has soft pillow for your customer's hands. you can find pillow collor that will be suitable for your interior color - we have 18 different variants. The kit has 2 qualitative bags, reusable mask and palette. Device body is made of shockproof plastic. Dust collector has industrial air fan with antifriction bearing and special anti-slip rubber pads on the feet. Working lifespan - 50 000 hours - it is almost 6 years of continuous working! This device is highly-productive and It will suit for all manicurist with all types of volatiles. Air fan has rubber seal which blocks dust in the bag. Warranty - 24 months. For your convenience speed controller is located separately from device body. After using our device you won't see any fleck of dust!

Request for a quote

Request for quotes

Create one request and get multiple quotes form verified suppliers.

  • Only relevant suppliers
  • Data privacy compliant
  • 100% free