Universal joints - Import export

Highperformance polymer iglidur® G, iglidur® J or iglidur® X. Version iglidur® G grey; iglidur® J yellow; iglidur® X black Note Plastic highperformance polymer plain bearings. – maintenancefree – lubricantfree – corrosionresistant – resistant to dirt – high dimensional precision – high pressure resistance – good heat dissipation – very low creep tendencies – high mechanical damping – resistant to UV radiation. Assembly The bearings are designed for press fits in H7 bores. After pressing in, the ID of the bearing will be diameter D with the relative tolerance. The bearings are suitable for shafts with h tolerance (recommended min. h9).

Selflubricating. Hardness 190220 HB. Note The guide bushes are radially and axially applicable. The bearing elements are maintenancefree and wearresistant. The graphite inserts provide lifelong lubrication. Preferably for travel speeds < 0.5 m/s. (Additional lubrication is recommended for extreme loading with a higher travel speeds). Temperature range Temporary temperature peaks up to ca. 200°C. Tolerances The bore for the bearings should correspond to ISO tolerance H7. The tolerance h6 to h7 is recommended for the shaft.

Exceptionally wearresistant Dimensionally stable even at high temperatures Electrically insulating Frequency neutral

Housing igumid® G. Swivel ball iglidur® W300 Note The ability to pivot allows pillow block bearings to compensate for misalignment and possible shaft deflection. They are easy to install and suitable for the accomodation of rotating, oscillating and linear movements. igubal® pillow block bearings are maintenance free and conceived for dry running condition. Assembly These pillow block bearings are designed for mounting with 2 screws. The ID tolerance is E10. The matching shaft should have a tolerance of h6 to h9.

Universal joints with plain bearing can be swivelled by 45°. Max. transferable torque (Nm) at 150 rpm, operation angle α < 5°. * Bore depth is less than by DIN 808.

Product Descriptions 1) TOTAL 12 Types : BUSHING, CAP, ELBOW, NIPPLE, PLUG, REDUCING NIPPLE, REDUCING, SOCKET, REDUCING TEE, SOCKET, TEE, THREADED UNION, WELDING, UNION 2) TOTAL 2 SIZE Types <SIZE 1 : CAP, ELBOW, NIPPLE, PLUG, SOCKET, TEE, THREADED UNION, WELDING UNION - 1/2", 3/4", 1", 1-1/4", 1-1/2", 2"> <SIZE 2 : BUSHING, REDUCING NIPPLE, REDUCING SOCKET, REDUCING TEE - 3/4"x1/2", 1"x1/2", 1"x3/4", 1-1/4"x1/2", 1-1/4"x3/4", 1-1/4"x1", 1-1/2"x1/2", 1-1/2"x3/4", 1-1/2"x1", 1-1/2"x1-1/4", 2"x1/2", 2"x3/4", 2"x1", 2"x1-1/4", 2"x1-1/2"> 3) Applications - All stainless steel pipes, Hot and Cold water pipeline for industry - Fire water lines and waterworks, Oil pipelines 4) Materials : Stainless steel CF8 & CF8M 5) Working Pressure : 10bar (Maximum operation pressue : 20bar) Features -Twice higher corrosion resistance applied by the solution heat treatment - Uniquely designed to avoid damages by slip of tools

Product Descriptions 1) Total 8 Types : ELBOW, TEE, SOCKET, END CAP, VALVE SOCKET, REDUCING SOCKET, REDUCING TEE, SADDLE SOCKET 2) Total 4 Size Types SIZE 1 : ELBOW, TEE, SOCKET, END CAP - 15, 20, 25, 32, 40, 50 SIZE 2 : REDUCING SOCKET, REDUCING TEE - : 20x15, 25x15, 25x20, 32x15, 32x20, 32x25, 40x15, 40x20, 40x25, 40x32, 50x15, 50x20, 50x25, 50x32, 50x40 SIZE 3 : SADDLE SOCKET - 15xPF3/4, 20xPF1, 25xPF11/4, 32xPF11/2, 40xPF2, 50xPF21/2 SIZE 4 : VALVE SOCKET - 15xPT1/2, 20xPT3/4, 25xPT1, 32xPT11/4, 40xPT11/2, 50xPT2 3) Applications - Stainless steel pipe (ASTM A269) - PVC-U, PFP, PSP and Spool pipes - Hot and Cold water for industries and waterworks 4) Materials : Stainless steel CF8 & CF8M 5) Working Pressure : 20 bar Features - Twice higher corrosion resistance applied by the solution heat treatment - Perfect leakage protection by applying uniquely designed cone packing - No pipe breakaway and leakage under condition of ground sink and quake

These precision slideways with roller bearings are used in machine and fixture construction, metrology, optical instruments and precision mechanics. The scale division on the micrometer dial is 0.02 mm. The stated permissible load values (F) are designed for a service life of 1 million travel cycles. The torque values apply only to centred slides. An additional centring hole is located at holes D2 and D3 on the top of the slide. Other connecting elements can be precisely mounted on the slide in combination with our centring rings 20240. F = permissible loading for dynamic and static loads. TI E/E1 = number of fastening holes E/E1/M inside. TA E/E1 = number of fastening holes E/E1/M outside. TI E4 = number of fastening holes E4/D1 inside. TA E2 = number of fastening holes E2/D1 outside.

These precise slideways are used in e.g. machine, fixture and metrology equipment construction as well as in the optical and precision engineering industries. The central set screw M1 can be replaced by a clamping lever 06460. The stated permissible load values (F) are designed for dynamic loads with a service life of 1 million travel cycles. For static loads, 10 times the table value F is permitted. The torque values apply only to centred slides. An additional centring hole is located at holes D2 and D3 on the top of the slide. Other connecting elements can be precisely mounted on the slide in combination with our centring rings 20240. TI E = number of fastening holes E/M inside. TA E = number of fastening holes E/M outside. TI E1 = number of fastening holes E1/D1 inside. TA E1 = number of fastening holes E1/D1 outside.

These precision dovetail slides find use in e.g. machine and fixture construction, metrology, optical instruments and fine mechanics. The stated permissible load rating (F) is for static loads. The torque values only apply for centred carriages. TI = number of fastening holes E1/E2/MI inside. TA = number of fastening holes E/E1/MA outside. TM = number of centring holes D1 inside. TN = number of centring holes D1 outside. Advantages An additional centring hole is located at all tapped holes. Other connecting elements can be precisely mounted on the slide in combination with our centring rings 20240. Quick and retrofit combination in the X, Y and Z axes.

Elastomer spider polyurethane Shore 98A. Coupling housing and clamping hub, aluminium. Expanding mandrel steel. Screws steel. Centring rings 1.4301 stainless steel. Version Coupling housing black anodised. Note The motor adapter set with elastomer dog coupling system (elastomer coupling with expanding mandrel) provides a simple and costeffective solution for connecting electric motors. Advantages of the elastomer dog coupling Hub with expanding mandrel can be mounted axially Playfree with vibration absorption Excellent retaining force Excellent concentric accuracy Short design Easy to assemble Can be mounted axially on spigot side Electrical insulation Nominal torque up to 30 Nm On request Larger hub bore D. Higher nominal torque.

Body, extruded aluminium section. Bearing housing and slide, aluminium. Profile guide rail and guide carriage, steel. Toothed belt, polyurethane with steel cord reinforcement. Version Body natural colour anodised Bearing housing and slide, black anodised. Tracks of the profile guide rail, inductively hardened and ground. Note Compact and flexible linear actuators with toothed belt drive. The body consists of a selfsupporting aluminium extruded section with integrated profile guide rail. This rail system is able to absorb highest forces from all directions, is lowwear, and is optimised for moving large masses. Slots are located on the outer sides of the aluminium profile, ensuring easy, reliable assembly and enabling accessories mounted. Proximity switches can be positioned and fastened in the upper Tslot. The aluminium profile is fully compatible with our standard I series profiles.

Body and flange plate EN AW5754. Guide shafts steel Version Body, hardcoated Flange plates, anodised. Guide shaft, hardened. Note Maintenancefree pneumatic linear modules with two precision steel shafts and ball guide bushing with wipers. Double acting cylinder drive. All fastening threads have threaded inserts. The as accessory available shock absorbers and proximity switches can be integrated (no protruding edges). Positive fit construction for hundred per cent reproducibility. Combinations in all sizes and stroke variants are feasible without adapter plates. Repeat accuracies of ±0.01 mm are possible. Specified loads apply by centred carriages. On request Available with locking cartridge as stroke deviation safeguard. Accessory See table for shock absorber, proximitiy switch and plug connector.

Cotrec CorrLube™ VpCI Lithium EP Grease is a top-tier, multi-use lubricant providing unmatched corrosion protection and lubrication. Its lithium complex thickener and advanced Vapor phase Corrosion Inhibitor (VpCI) technology shield metal surfaces from rust, corrosion, and wear.VpCI molecules create a molecular barrier against moisture, salt, and corrosive agents, making it perfect for harsh conditions.Beyond corrosion prevention, this grease excels in lubrication. Its lithium complex thickener ensures strong adhesion and high viscosity, delivering reliable lubrication under heavy loads and extreme pressures.Enhanced by extreme pressure (EP) additives, it handles demanding applications with ease.Designed for versatility, it thrives from -40°F to 350°F, making it suitable for various climates.Ideal for bearings, gears, universal joints, chassis, farm, construction, automotive, industrial, marine, and HVAC equipment.

REFERENCE NUMBER 1351400030, 3819769071, 1451400190, 1451435110, 1756011520, 3819769081, 14415B1210, 11415B1210, 38510178571, 262778, 70275222, 73111401, 73134821, 76002601, 79011402, 1S9670, 7K3526, 2T0095, 2Y6471, 3H0301, 3H7364, 7G9555, 8K8002, 8K6970, 9H2477, 9H2478