Results for
NORELEM FRANCE
France
Standard ATprofile with metric pitch (trapezoidal toothing). For manufacturing your own toothed wheels
Request for a quoteRHIMEX.COM
Netherlands
Corner profiles are elastic and provide good sealing at different angles, and are widely applicable in construction and industry. Available in both EPDM, TPE and other materials. Due to elasticity, sealing is possible at different angles EPDM and TPE UV and ozone resistant, can be used both indoors and outdoors Long lifespan
Request for a quoteRHIMEX.COM
Netherlands
Uprofiles are suitable as a sealing profile, edge finishing, clamping profile or as a bumper. High elasticity protects against tearing UV and ozone resistant Long lifespan
Request for a quoteRHIMEX.COM
Netherlands
Rectangular profiles are very versatile. As a seal, door profile or finishing profile. Available in different materials. For various indoor and outdoor applications Very versatile for use in ship, bodywork and vehicle construction Possible in EPDM and sponge rubber
Request for a quoteNORELEM FRANCE
France
GJL 250 annealed or EN AW-7075. Drawing reference: machined faces: ±0.25 mm length tolerance: ≤200 mm: +3/+10 >200 mm ≤590 mm: +8/+15 ≥600 mm: +20/+50
Request for a quoteNORELEM FRANCE
France
Profile guide rails can be screwed on from above. The profile guide rails are available in four sizes and one or more carriages can be assembled on them. 4row versions with round arch profile. The tracks of the profile guide rails are set below an angle of 45° and thus can carry loads from all directions. The profile guide rails correspond to the market standard and can replace linear guides of the same design by other manufacturers. On request Lengths up to a max. 3960 mm.
Request for a quoteNORELEM FRANCE
France
Belt back and belt teeth CR. Tension cords Glascord. Tooth covering mesh polyamide. Note Endless toothed belts with an arched profile as per ISO 13050 with metric pitch. The rounded shape of the tooth contour provides a particularly high degree of safety against incorrect tooth interlocking, combined with a very rounded tooth mesh. Operating noise is significantly reduced by the rounded tooth mesh. The toothed belts are robust, economical and versatile. Belt speed vmax perm. 50 m/s Transmissible power up to 8.42 kW Permissible speed up to 14000 rpm Lownoise and lowmaintenance Very good chemical resistance, particularly against oils, greases and fuels Accurate positioning and angles
Request for a quoteNORELEM FRANCE
France
Steel. Toothed pulleys without aluminium rim flanges. Version Steel phosphated. Aluminium bright. Note Standard HTD profile with metric pitch (halfround toothing). At least one belt pulley must have a rim flange. The toothed belt pulleys have a centre bore or a pilot hole (this can vary due to manufacturing methods). For this reason, the dimension D2 max. given in the table is the maximum diameter of the bore with which the toothed belt pulleys are supplied. This pilot/centre bore can be amended by the customer to produce a reamed bore, reamed bore with keyway or a tapped hole. Alternatively, customers can also use bushes to reduce the bore diameter. The pulleys may be recessed on the sides.
Request for a quoteNORELEM FRANCE
France
Body carbon steel. Balls roller bearing steel. Diverters plastic. Standard guide carriage with recirculating ball guidance precision N not preloaded (Z0). With doublesided end seal. 4row versions with round arch profile. The profile guide rail tracks are arranged at 45° and can accept loads from all directions. High dynamic values v = 5 m/s. Applicable temperature in continuous use max. 80 °C. On request Various precision and preload classes. Drawing reference 1) ground ref. edge
Request for a quoteNORELEM FRANCE
France
Body, extruded aluminium section. Bearing housing and slide, aluminium. Profile guide rail and guide carriage, steel. Toothed belt, polyurethane with steel cord reinforcement. Version Body natural colour anodised Bearing housing and slide, black anodised. Tracks of the profile guide rail, inductively hardened and ground. Note Compact and flexible linear actuators with toothed belt drive. The body consists of a selfsupporting aluminium extruded section with integrated profile guide rail. This rail system is able to absorb highest forces from all directions, is lowwear, and is optimised for moving large masses. Slots are located on the outer sides of the aluminium profile, ensuring easy, reliable assembly and enabling accessories mounted. Proximity switches can be positioned and fastened in the upper Tslot. The aluminium profile is fully compatible with our standard I series profiles.
Request for a quoteNORELEM FRANCE
France
Housing glassbead reinforced polyamide. Rollers POM. Screws steel. Version Housing and rollers black. Screws electro zincplated. Note The roller elements are ideal for constructing roller conveyors in any length and width. Suitable for aluminium profiles types B and I. The sprung guide tabs underneath universally match slots sized 8 and 10. Mounting Form A Insert the lower housing part with rollers into the aluminium profile slot. Set the spread pins on the upper housing part into the lower housing part and press down. The spread pins expand the clamps and locks the roller element in the slot. Mounting Form B Insert the lower housing part with rollers into the aluminium profile slot. Set the upper housing part on top and press down. Knocking or screwing the screws in locks and clamps the roller element in the slot.
Request for a quoteNORELEM FRANCE
France
These brackets are used to hang aluminium profiles for roller rails in a round profile. A mounting set is supplied.
Request for a quoteNORELEM FRANCE
France
Ball stainless steel. Housing steel. Cage polyamide, carbonfibre reinforced. These ball transfer units are matched to the aluminium profiles for roller rails and can be mounted on them quickly and easily. For flexible movements in two dimensions. With a lowwear and lowfriction ball rollers. No tools required. Suitable for aluminium profiles Type B and I.
Request for a quoteNORELEM FRANCE
France
Bearing flanges and fastening pieces PAGF. Bolts steel. Black. Bolts electro zincplated. Two bearing flanges combined with a D50 type I aluminium profile tube (10050) form a feed roller (loadbearing roller). The bearing flanges are simply pressed into the aluminium profile tube. These can be used for many conveyance tasks. The bearing flanges have ball bearings and springloaded fastening spigots which enable transport rollers to be retrofitted into existing structures. A roller conveyor is created when several transport rollers are mounted in series. Two bearing flanges are required for a transport roller.
Request for a quoteNORELEM FRANCE
France
Type I polypropylene. Type B polypropylene + TPE. The cover and adapter profile made of flexible plastic are used for two different applications. As a cover profile it seals the profile slots against dust and dirt. As an adapter profile with the open side facing out it is used to hold panel elements.
Request for a quoteNORELEM FRANCE
France
Angle diecast zinc. Screws and slot nuts steel. End cap polyamide, fibreglass reinforced. Version Angle painted aluminium tone. Screws and slot nuts electro zincplated. End cap black. Note Suitable for reinforcing profile constructions and for frictional connection of profiles with each other without machining. Can also be used as fastening element (e.g. bracket) for any components. The angles have centring lugs for accurate and twistproof mounting. The centring lugs can be removed if necessary by breaking off i.e. for mounting plates. The open side can be closed off with the end cap.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
NORELEM FRANCE
France
The connecting sets are used for connecting two aluminium profiles at right angles. The connection is nonrotating. For larger profiles several connecting sets can be mounted on the end for greater strength Low workload. Cut a thread in the end face core hole. Drill a through hole for tightening the screw in the opposing profile.
Request for a quoteNORELEM FRANCE
France
The aluminium profile is matched to the roller elements. As a result, roller rails and roller tracks can be realised. The different inserts permit modular and flexible setup.
Request for a quoteNORELEM FRANCE
France
Lightweight aluminium profile for weightoptimised constructions.
Request for a quoteNORELEM FRANCE
France
The aluminium profile is matched to the roller elements. As a result, roller rails and roller tracks can be realised. The different inserts permit modular and flexible setup.
Request for a quoteNORELEM FRANCE
France
Aluminium profile for general structures. The round tube, also referred to as a profile tube forms a feed roller when used in combination with bearing flanges (10400).
Request for a quoteNORELEM FRANCE
France
Aluminium profile for general constructions.
Request for a quoteNORELEM FRANCE
France
Lightweight aluminium profile for weightoptimised constructions.
Request for a quoteNORELEM FRANCE
France
Suitable for emergency stop and continual use. Energy reduction: 25% to 45%. Dynamic force absorption: 218 N to 3730 N Impact velocity: max. 5 m/s. The profile dampers are maintenance-free and are supplied ready to install with a special fastening screw. Environment: Resistant to microbes, sea water, chemicals and with very good UV and ozone resistance. No water absorption or maceration. Application: Linear slides and linear guides, pneumatic cylinders, furniture industry, machines and plants.
Request for a quoteNORELEM FRANCE
France
Suitable for emergency stop and continuous use Energy reduction: 58% to 73% Dynamic force absorption: 870 N to 35190 N Impact velocity: max. 5 m/s. The profile dampers are maintenance-free and are supplied ready to install with a special fastening screw. Environment: Resistant to microbes, sea water, chemicals and with very good UV and ozone resistance. No water absorption or maceration. Fastening screws: Special cap screws with hex sockets, material 44SMn28 (free-cutting steel SAE 1144) electro zinc-plated: M6x9, M6x10, M8x14, M12x18, M16x26 ISO 4762 cap screws with hex sockets - 8.8 steel, black: M3x6, M4x8**, M5x10** ** With DIN 125 washer, electro zinc-plated steel. Application: Linear slides and linear guides, pneumatic cylinders, handling equipment, machines and plants
Request for a quoteSECUM DOORS S.R.O
Czech Rep.
And WDS 6S is the optimal choice for multi-storey buildings, its profile is special, polished and defined in shape. Larger glazing gives the room lightness and visual spaciousness, which is especially important in the case of nurseries and living rooms.
Request for a quoteEUROPONTEX IMPORTAÇÂO & EXPORTAÇÂO
Portugal
arious C & U & Sigma sizes. Sheet thickness for profiling: 0.75mm - 2.5mm Produces 4 profile sizes: 90x50x15mm 140x50x15mm 200x50x15mm 250x50x15mm Works with the Vertex system.
Request for a quoteEUROPONTEX IMPORTAÇÂO & EXPORTAÇÂO
Portugal
Double sheet profiling machine. The machine makes 2 independent profiles tailored to the customer's requirements. For example, it can make a façade profile and a roof profile.
Request for a quoteResults for
Profiling - Import exportNumber of results
78 ProductsCountries
Company type
Category