Results for
France
Do you want to validate a concept, or industrialise the production for a new process, new material or new technology? Do you want to minimise the industrial and financial risk involved? Are you concerned about your project’s feasibility? Does the implementation of this project require the involvement of several external contractors at each phase of the process whose specific processes require common pre-validation
Request for a quoteSouth Korea
Our company creates and seeks a healthy company culture, and is making efforts to promote the atmosphere that allows our employees to develop themselves in a pleasant environment under the conviction that “workplace should be a living place for their personal development and the realization of their dreams as members of society. Then, nowadays faced with a urgent issue, the reconsideration of company’s technological competitiveness through the advancement of semiconductor industrial structure, our company is moving towards its technological innovations according to rapid changes in technologies and the circulation of product cycles based on this conviction.4M Electro-Optics Co., Ltd. promises our customers that it will be a company of good ideas, wonderful memories, and excellent products at all times.
Request for a quotePoland
Characteristics: 190 g/m² 100% Melange Recycled Cotton 4 CM Loop to hold / hang the pouch Internal overlock seams Dimensions: 26 x 17 cm Maximum print area: 15 x 8 cm Suitable for embroidery, Screen, and transfer printing
Request for a quoteSouth Korea
Made of fully Eco-friendly materials Contain no hormone-disrupting chemicals, environmental hazards such as Bisphenol A, Phthalate, Dioxin Non-P.V.C material: None of following chemicals are included (formaldehyde, TVOC, heavy metal, benzene, toluene) Available back types: paper, woven, non-woven Use: stationary product, premium package width : 1050mm (generally, paper+film), 1070mm (color printed film only) length : 100m/roll stationery (note, diary, file) surface materials premium package surface materials [More Information] www.artsandverdant.com www.youilanl.com
Request for a quoteFrance
Injection moulded, straight teeth. Engagement angle 20°. Machined bore. Polyacetal, white. Polyketone, ivorytone. Note Polyacetal Standard material with high hardness grade and low coefficient of friction. Polyketone Material with significantly longer service life, higher power transmission and greater security against tooth breakage due to the extraordinarily high wear resistance and very good tribological properties. Can be used under water and other media. Injection moulded gear wheels may have internal manufacturerelated cavities. These may become visible during drilling or broaching. They do not impair the function. The torques specified in the tables relate exclusively to the toothing.
Request for a quoteFrance
Carriage body zinc. Plastic bearing material iglidur® J. Rails anodised aluminium. Version Body chromed. Guide rail natural colour anodised. Note Miniature slide guides are maintenancefree and corrosion resistant. Very high speeds and accelerations are possible due to the low weight. Applicable temperature max. 80 °C. Miniature slide guides are insensitive to dust and are ideal for dry running. ** length L2 = 30 mm and * L = 1000 mm included L2 and L only available in full mm.
Request for a quoteGermany
Metric: Screws from M2 x 10 – M30 x 1000 with thread (up to 100 mm long). Compliant with DIN, EN, ISO, or according to drawings and samples. Plates: From ST 2.9 x 19 – ST 6.3 x 160 / 80 mm with thread (up to 80 mm long). Compliant with DIN, EN, ISO, or according to drawings and samples. KTG screws for plastics: 30-degree thread (OEB Kunst). KTG 3 x 10 mm – KTG 8 x 160 mm with thread (up to 60 mm long). DIN 7500 thread grooving screws: For die casting, zinc or aluminium. M3 x 20 – M10 x 160 mm with thread (up to 50-60 mm long) (OEB Furch). DIN 7513 – DIN 7516 thread cutting screws: For die casting, zinc or aluminium. M3 x 20 – M10 x 160 mm with thread (up to 50-60 mm long) (OEB Schneid). Other thread types: With-Worth, HiLo, UNC/UNF, double-start, triple-start.
Request for a quoteFrance
The nominal diameter of the pin is the same as the receiving hole diameter. The recommended hole tolerance is ISO H12. Due to the chamfered end, the pins can be inserted easily into the hole with a hammer or using automatic placement. After insertion, the plus tolerance of the pins results in a vibration-proof seating. The pins can be easily removed using a mandrel and reused several times. The pins can transmit high shear forces and are resistant to shocks and impacts due to their spring properties. The values specified for the shear force only apply to spring steel.
Request for a quoteFrance
Grid hole pitch 25 ±0.01 mm or 50 ±0.01 mm. Grid hole plugs and ring bolts for lifting are supplied. These subplates conform to subplates for machine tools according to DIN 55201 and JIS 6337-1980. The subplates are also available without grid holes. See plates without a value for “A” (xxx/-). Other dimensions on request.
Request for a quoteSouth Korea
Description A dental material for bite registration(=occlusal impression) having a shorter setting time. A bite registration material. Features Shore A 89 hardness minimizes negative deformation Easy to apply Patient does not feel any irritation so it’s easy to acquire precise bite registration at once Easy to be processed with mess or bur during trimming Similar quality to top brand products but moderate price
Request for a quoteSouth Korea
Description A light bodied dental impression material having a shorter setting time, can provide more detailed impression. A wash material. Type 3 (ISO4823) Low consistency. Features Appropriate thixotropy. Smooth but does not flow down being applied on upper tooth. Because of high hydrophilicity and ideal flow, able to realize details for precise impression. High elasticity and resistance for tearing guarantees safety from negative deformation High affinity with plaster enables detailed modeling. Compatibility with products of other manufacturers is excellent.
Request for a quoteSouth Korea
Description Dental putty product having a regular setting time. A tray material. A dental impression material to be mixed with bare hands. Type 0 (ISO4823) Very high consistency. Features Not sticky. Its viscosity is suitable for mixing it with bare hands. Patient does not feel any repulsion because it has no taste and odor. After hardened, very hard to minimize negative deformation during impression. High affinity with plaster enables detailed modeling. Oil does not ooze during mixing with bare hands Dissimilar to putties of other manufacturers.
Request for a quoteSouth Korea
This is a horizontal drain resolving problems of existing drainage methods. It is constructed by directly inserting PVD to water channels of WHD so it prevents the loss of pore water and improves the water collection rate by more than three-fold. Since water channels with over 50% of a contact area has an excellent load dispersion effect, it maintains excellent drainage performance of a minimum of 3,500cm3 under 500kPa overburden load. Therefore, it has excellent water collection and drainage capability for pore water delivered from many PVDs. - A new horizontal drainage method maximizing water collection and drainage efficiency by directly inserting and connecting PVD to a water channel of a horizontal drain - Excellent economic feasibility that can reduce the cost of construction more than 30% compared to sand/aggregate drainage layers - Core structure with an outstanding load dispersion effect with over 50% of a contact area
Request for a quoteSouth Korea
Bio Verti-Drain® is an eco-friendly biodegradable Prefabricated Vertical Drain (PVD) for soft ground improvement, which well reproduces physical advantages of Verti-Drain®. Bio Verti-Drain® is biologically degraded after installation and ground consolidation in natural soil conditions without leaving any residual plastic behind. Bio Verti-Drain® is the first prefabricated vertical drain which obtained “Eco-Label” from Ministry of Environment of Korea. 1) Bio Verti-Drain® is a biodegradable product which degrades into H2O and CO2 in natural conditions after completing soil consolidation and it is different from bio-disintegrable product which leaves behind plastics after its partial degradation.After installation, Bio Verti-Drain® maintains its performance for 3 years and degrades into water and carbon dioxide via microbiological degradation and hydrolysis after completing soil consolidation.
Request for a quoteNetherlands
Tprofiles are specially made to seal gaps or crevices, of doors, hatches, windows or with sheet material. High elasticity protects against tearing EPDM and TPE UV and ozone resistant Widely used in ship and bodywork construction
Request for a quoteNetherlands
Corner profiles are elastic and provide good sealing at different angles, and are widely applicable in construction and industry. Available in both EPDM, TPE and other materials. Due to elasticity, sealing is possible at different angles EPDM and TPE UV and ozone resistant, can be used both indoors and outdoors Long lifespan
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Kazakhstan
High quality construction material. Plywood has high strength and an attractive surface appearance. Thickness, mm - 3 - 30 Our manufacturing capabilities encompass plywood thicknesses ranging from 3 millimeters to 30 millimeters, offering our customers a comprehensive selection to meet their specific needs Grade B/BВ, BB/CP, BB/C, CP/CP, CP/C, C/C Material - 100% birch This material contributes to the exceptional quality, durability, and versatility of our plywood Glue category - exterior By incorporating Glue category - exterior adhesives into our manufacturing process, we prioritize delivering high-quality plywood that meets the demands of outdoor environments, providing our customers with a reliable and resilient material for their projects. Format, mm 4x8 1220 / 1250 х 2440 / 2500 8x4 2500 / 2440 x 1250 / 1220 Formaldehyde emission class - E1
Request for a quoteArmenia
We present Certified moisture-resistant FSF plywood, which is made from natural wood veneer. Phenol-formaldehyde resin glue is used for gluing, which allows achieving high environmental parameters. The material is safe for health when used in any temperature conditions: even in the case of strong heating, it does not emit toxic substances.Advantages: Versatility of use High strength and wear resistance Easy to process High level moisture resistance
Request for a quoteArmenia
We present an environmentally friendly, easy to process, durable and aesthetic material. FC plywood is indispensable for the construction of floors, the production of furniture, decorative interior elements, and wooden packaging. It is valued for a whole range of advantages that are not typical for any other types of plywood products.
Request for a quoteArmenia
We present an environmentally friendly, easy-to-process, durable and aesthetic material. FC plywood is indispensable for the construction of floors, the production of furniture, decorative interior elements, and wooden packaging. It is valued for a whole range of advantages that are not typical for any other types of plywood products.
Request for a quoteKazakhstan
Hexagon socket bolt, DIN-EN-ISO 4762 (old DIN 912 standard) Galvanized, strength class 8.8 Material: C1035 steel Coating: electroplating Thread: metric, normal, accuracy class - medium (6g) A bolt with a cylindrical head and a turnkey internal hexagon, complete and incomplete metric: thread.
Request for a quoteKazakhstan
The main purpose is to attach heavy equipment to concrete, natural stone, and brick. End-to-end installation. The anchor is hammered into a pre-drilled hole in the attached material and concrete, and then tightened with a nut.
Request for a quoteBelgium
Antifinger print is a treatment based on the combination of oleophobic and hydrophobic materials. It means that it is repellent to water and grease/ Its special feature allows the glass to be easily cleaned without changing the appearance of its surface while giving a uniform aspect. This also provides better optical properties and a real softness in touch feeling.
Request for a quoteBelgium
Glass is a material widely used in the medical field for many of its properties. Some specific tools or accessories require a madetomeasure shape, and our laser cutting technology is here to deliver to those special requirements.
Request for a quoteBelgium
We offer highquality prototypes for industrial product development. Our inhouse design team will work along with you to define the best material and integration.
Request for a quoteBelgium
Our printing capabilities are able to mimic any desired other material. You can make glass into wood, concrete, marble... And print any sort of pattern and colors. Our dedicated design team is here to help and even create your desired design for you.
Request for a quoteBelgium
Printing on glass is a technique offering endless decorative possibilities for many fields of applications, including home interior, automotive, electronic devices, etc... We pay close attention to colors and make sure they meet your expectations in hue and opacity. Many colors are available, and different level of opacity can be obtained. We can recreate materials like wood, marble... The printing resists to the bonding techniques that are typical in the manufacturing industry, such as optical bonding.
Request for a quoteResults for
Material - Import exportNumber of results
36 ProductsCountries
Company type
Category