Machine%20construction - Import export

This is a horizontal drain resolving problems of existing drainage methods. It is constructed by directly inserting PVD to water channels of WHD so it prevents the loss of pore water and improves the water collection rate by more than three-fold. Since water channels with over 50% of a contact area has an excellent load dispersion effect, it maintains excellent drainage performance of a minimum of 3,500cm3 under 500kPa overburden load. Therefore, it has excellent water collection and drainage capability for pore water delivered from many PVDs. - A new horizontal drainage method maximizing water collection and drainage efficiency by directly inserting and connecting PVD to a water channel of a horizontal drain - Excellent economic feasibility that can reduce the cost of construction more than 30% compared to sand/aggregate drainage layers - Core structure with an outstanding load dispersion effect with over 50% of a contact area

Bio Verti-Drain® is an eco-friendly biodegradable Prefabricated Vertical Drain (PVD) for soft ground improvement, which well reproduces physical advantages of Verti-Drain®. Bio Verti-Drain® is biologically degraded after installation and ground consolidation in natural soil conditions without leaving any residual plastic behind. Bio Verti-Drain® is the first prefabricated vertical drain which obtained “Eco-Label” from Ministry of Environment of Korea. 1) Bio Verti-Drain® is a biodegradable product which degrades into H2O and CO2 in natural conditions after completing soil consolidation and it is different from bio-disintegrable product which leaves behind plastics after its partial degradation.After installation, Bio Verti-Drain® maintains its performance for 3 years and degrades into water and carbon dioxide via microbiological degradation and hydrolysis after completing soil consolidation.

* Lightly weighted (23kg) & easy to carry * Rapid cutting speed: 4 seconds per cut * All 4 edges of the cutting blades are usable * Electrically driven hydraulic system * Compatible with power supply at home * Dimension: 500 * 157 * 250 (mm) * Motor: AC2.5kw * Weight : 23kg * Power: Single phase 115v or 220v / 50,60hz * Oil : SHELL Tellus #46 * Product Usage : Construction site for on-site fabrication. We, Taeyeon Machinery Co.,Ltd was established in 1992 and grown to become a professional manufacturer of rebar cutting and bending machines (Brand name:BNC). We are being a leading company in South Korea in this field beyond constant technical development and challenging. http://taeyeon.co.kr/en/

It is a mechanical joint system that connects rebars to rebars in general construction works and civil engineering works. D13 ~ D32 (See catalog) The existing method could only be connected by threading the rebar, but it is a device that can be connected smartly without the need for machining the rebar of our company. Construction site, civil engineering site, basic construction site, bridge construction site, etc.;

These spring plungers are chiefly used as ejectors and spring stops in machine construction. The thrust pin is actuated in the axial direction. Drawing reference: 1) grub screw glued in

For high demand hoisting and carrying tasks in safety-relevant areas (machine construction, load handling equipment, lifting tackle). The CE mark is impressed into the ring bolt. F2 permissible load under max. 45° per ring bolt. On request: Certificate of conformity.

Frame brass. Tubular bubble vial glass. Version Nickelplated and highgloss polished. Form B black anodised. Note Bubble levels are used as a type of zero indicator instrument for checking horizontal inclination in e.g. spirit levels, inclinometers, metrology instruments and machine constructions. The tubular levels can be fastened using the two holes. Form A one sight window Form B three sight windows Sensitivity in angular minutes for 2 mm bubble travel Green filling

Bullseye level body stainless steel up to Ø14 mm, then aluminium. Sight window glass. Version Aluminium black anodised. Note Bubble levels are used as a type of zero indicator instrument for checking horizontal inclination in e.g. spirit levels, inclinometers, metrology instruments and machine constructions. Excellent bubble contour, with internal bubble ring to eliminate planar parallaxes. Sensitivity in angular minutes for 2 mm bubble travel Clear filling

Frame brass. Bullseye level body polyamide. Bubble levels are used as a type of zero indicator instrument for checking horizontal inclination in e.g. spirit levels, inclinometers, metrology instruments and machine constructions. These bullseye levels can either be screwed down using the three holes (Form A) or recessed (Form B). Form A calibrated to the ground bottom face Form B calibrated to the underside of the flange Sensitivity in angular minutes for 2 mm bubble travel Clear filling Black contrast ring White level base

Case-hardened and black oxidised. Note: Positioning feet are used as supports, stops and thrust pads for fixtures and general machine and appliance construction. Drawing reference: Form A: External thread and flat face Form B: External thread and convex face Form C: External thread and serrated face Form K: External thread and carbide serrated face Form L: External thread and POM insert Form D: External thread and flat face Form E: External thread and convex face Form F: External thread and serrated face

These precision slideways with roller bearings are used in machine and fixture construction, metrology, optical instruments and precision mechanics. The scale division on the micrometer dial is 0.02 mm. The stated permissible load values (F) are designed for a service life of 1 million travel cycles. The torque values apply only to centred slides. An additional centring hole is located at holes D2 and D3 on the top of the slide. Other connecting elements can be precisely mounted on the slide in combination with our centring rings 20240. F = permissible loading for dynamic and static loads. TI E/E1 = number of fastening holes E/E1/M inside. TA E/E1 = number of fastening holes E/E1/M outside. TI E4 = number of fastening holes E4/D1 inside. TA E2 = number of fastening holes E2/D1 outside.

These precision dovetail slides find use in e.g. machine and fixture construction, metrology, optical instruments and fine mechanics. The stated permissible load rating (F) is for static loads. The torque values only apply for centred carriages. TI = number of fastening holes E1/E2/MI inside. TA = number of fastening holes E/E1/MA outside. TM = number of centring holes D1 inside. TN = number of centring holes D1 outside. Advantages An additional centring hole is located at all tapped holes. Other connecting elements can be precisely mounted on the slide in combination with our centring rings 20240. Quick and retrofit combination in the X, Y and Z axes.

TIG welding machine that combines robust industrial construction with excellent arc . Excellent arc performance - perfect HF ignition, stable, focused and fast arc (for pulsed and non-pulsed arc). Simple control panel - full control, easy configuration. Energy efficiency - PFC circuit, high efficiency, green mode. Portable - Small, lightweight PFC, 16A protection, 100m input cable, prepared for generator.

The OHB hook curtain is characterized by its simple design. The grab bar is attached to one central or two side hooking pins to attach the roller blind to it. The hookin curtain is often used in side or rear windows and in windows in the roof of cabins of agricultural or construction machines. Optimal pricequality ratio Delivery time only 4 weeks Different screw widths possible

SPECIFICATION PRODUCTIVITY1500 pouches/hour FILLING RANGE200-1000 ml POWER SUPPLY, MAX220 V, 50 Hz COMPRESSED AIR PRESSURE5 kg/cm2 AIR CONSUMPTION~ 0.2 m3/hour @4 bar PACKAGING MATERIAL1/2/3-layered polyethylene film with black internal layer; thickness – 70-90 microns, width – 320 mm FILLING ACCURACY± 0,5-1% [depending upon bulk density of product, constant product availability in the product tank (for liquids), proper maintenance] OVERALL DIMENSIONS , (WxLxH)670 x 790 x 2570 mm WEIGHT, NET~ 450 kg MACHINE CONSTRUCTION All components are mounted on a single frame. All parts in contact with the product are made from stainless steel AISI 304 . The exterior panels are made of stainless steel AISI 202. Mechanical drive. Protective and hygienic front door. Basic Elements: Film unwinding is provided by rubberized shaft with electric drive and operated by inductive sensors Ultra-violet lamp for film sterilization Liquid Filler CIP connector

Our machines produce insulated and high resistant EPS panels for the building market.

We are resellers of the Techneat range of amenity products, petrol powered spray machines upto 150 litres tank and 4 meter spray boom. Also the Acuspray hand pushed spray machines and Aculine -line marking machines. Extensively used on sports pitches. Acurate dosing rates and high quality construction differentiate these machines from other models. Distributor enquiries outside of the Uk are welcome please contact us directly.