Results for
TOK EUROPE GMBH
Germany
Partial Rotation Angle Damping torque 1.96 to 3.43 N ・ m TD69 damper can be used in up to 80°C temperature ambient thanks to the robust ULTEM™ material.
Request for a quoteTOK EUROPE GMBH
Germany
Partial Rotation Angle Damping torque 0.98 to 1.96 N ・ m TD60 has advantage on responsibility of damping thanks to the low backlash.
Request for a quoteTOK EUROPE GMBH
Germany
Partial Rotation Angle Damping torque 1.47 to 2.94 N・m TD56 damper is a low-backlash damper thanks to the inner structure.
Request for a quoteTOK EUROPE GMBH
Germany
Partial Rotation Angle Damping torque 0.15 to 0.59 N・m The lifetime of TD38 can be ensured up to 300,000 cycles. The damping torque typically fluctuates from high to low. If necessary, we can customize and adjust the damping behavior to your requirement.
Request for a quoteTOK EUROPE GMBH
Germany
Partial Rotation Angle Damping torque 0.49 to 1.96 N・m TD27/28 is torque-adjustable damper and ready-to-mount design. And, the torque typically fluctuates from low to high. If necessary, we can customize and adjust the damping behavior to your requirement.
Request for a quoteTOK EUROPE GMBH
Germany
Partial Rotation Angle Damping torque 2.45 to 3.92 N・m The lifetime of TD22 can be ensured up to 100,000 cycles thanks to the zinc die-cast outer body. TD22 torque typically fluctuates from low to high. If necessary, we can customize and adjust the damping behavior to your requirement.
Request for a quoteTOK EUROPE GMBH
Germany
Partial Rotation Angle Damping torque 0.10 to 0.29 N ・ m TD75 is the most compact body Ø11mm in TOK partial rotation dampers.
Request for a quoteTOK EUROPE GMBH
Germany
Continuous Rotation Angle Damping torque 10 to 40 mN ・ m
Request for a quoteTOK EUROPE GMBH
Germany
Partial Rotation Angle Damping torque 0.8 to 1.1 N ・ m SR3 damper is the state-of-the-art product which has two main features: ✔ Long lifetime: 300,000 cycles ✔ Automatic variable speed control
Request for a quoteTOK EUROPE GMBH
Germany
Rotation angle max. 120° Damping torque 3.0 to 10.0 N・m
Request for a quoteTOK EUROPE GMBH
Germany
Continuous Rotation Angle Damping torque 2.45 to 3.92 N・m
Request for a quoteTOK EUROPE GMBH
Germany
Partial Rotation Angle Damping torque 3.5 to 4.0 N ・ m TD129 damper can cover up to 4.0 N・m torque with the compact outer body Ø16 mm.
Request for a quoteTOK EUROPE GMBH
Germany
Partial Rotation Angle Damping torque 1.5 to 3.5 N ・ m TD118 damper can cover up to 3.5N・m torque even though all of the material plastic used.
Request for a quoteTOK EUROPE GMBH
Germany
Partial Rotation Angle Damping torque 0.45 to 2.94 N ・ m
Request for a quoteTOK EUROPE GMBH
Germany
Partial Rotation Angle Damping torque 0.98 to 2.94 N ・ m TD100 damper can cover up to 2.94 N ・ m toque with the compact body Ø16 mm.
Request for a quoteTOK EUROPE GMBH
Germany
Partial Rotation Angle Damping torque 0.98 to 1.96 N ・ m TD99 damper has chemical resistance thanks to being made of all PBT material. And, it can be used for both horizontal and vertical use application.
Request for a quoteTOK EUROPE GMBH
Germany
Partial Rotation Angle Damping torque 0.10 to 0.29 N ・ m TD73 damper is the most compact body Ø11mm in TOK partial rotation dampers.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
NORELEM FRANCE
France
Aluminium 6060 T5. Cover plug PA 6.6. Version: Black anodised. Colourless anodised. Note: These hinges have stainless steel tension springs which enables doors and hatches to open or close automatically. Opening angle 270°. Spring torque opening: M(0°): 0.7 Nm / M(90°): 0.5 Nm / M(180°): 0.3 Nm Fastened with DIN 7991 countersunk screws.
Request for a quoteNORELEM FRANCE
France
Stainless steel 1.4404. Version: Satin finished. Note: The hinges are made of weldable profile steel. The pin is fixed into the lower part of the hinge. The differing steel qualities of the weld and the beam onto which the hinge is welded must be at least equal to or better than: Stainless steel 1.4404
Request for a quoteNORELEM FRANCE
France
Steel, pins and connecting elements 1.4016 stainless steel. Stainless steel, all components 1.4404 stainless steel. Version: Electro zinc-plated. Bright. Assembly: - For recessed or surface mounting. - Can be mounted on right or left side. - For horizontal or vertical applications. Drawing reference: 1) recessed mounting 2) surface mounting
Request for a quoteNORELEM FRANCE
France
Hinge and caps fibreglass reinforced PA thermoplastic. Hinge pin stainless steel. Version: Hinge and caps black. Pin bright. Note: These hinges have a detent mechanism. This mechanism holds a door or lid open at three different angles or tightly closed. The hinges are available with or without guide tabs for aluminium profile slots. The loading values given for the hinges are non-binding reference values without consideration of safety factors and exclude any liability. The values given are for information purposes only and do not constitute a legally binding assurance of properties.
Request for a quoteNORELEM FRANCE
France
Fibreglass reinforced thermoplastic. Hinge pin stainless steel. Version: Hinge black. Pin bright. Note: All hinges can be supplied on request with guide tabs for the slots of aluminium profiles (slots 6, 8 and 10). They facilitate assembly, secure the hinge against rotation and make it harder wearing. The loading values given for the hinges are non-binding reference values without consideration of safety factors and exclude any liability. The values given are for information purposes only and do not constitute a legally binding assurance of properties. The load values have been determined under laboratory conditions. Each user must determine individually whether the hinge is suitable for the respective application. Different materials onto which the hinges are installed and the type of mounting, weather conditions and wear can influence the determined values.
Request for a quoteNORELEM FRANCE
France
Steel. Stainless steel 1.4305. Stainless steel A4 1.4401. Version: Steel electro zinc-plated. Stainless steel bright. Note: Block hinges with fastening nuts and extended middle section for inset doors. Mounted with nuts (M6 or M8) from inside. The hinge can be mounted left or right. The opening angle is 180°. Supplied unassembled. Fastening nuts and washers are supplied.
Request for a quotePANEL SELL GMBH
Germany
We can manufacture doors for chiller coldrooms and freezer storage areas (both hinged and sliding varieties). Delivery time for standard products is 2 - 3 weeks.
Request for a quotePANEL SELL GMBH
Germany
We can manufacture doors for chiller coldrooms and freezer storage areas (both hinged and sliding varieties). Delivery time for standard products is 2 - 3 weeks.
Request for a quoteDEMAREIS GMBH
Germany
In a wide variety of variations and sizes. A variety of openings and designs are available. For bottles and tubes.
Request for a quoteResults for
Hinges - Import exportNumber of results
29 ProductsCountries
Company type