Epoxy resins - Import export

DELO-DUOPOX are two part epoxy resin adhesives for bonding, casting and sealing of joints. Providing excellent adhesion to many materials, these two part epoxies are ideal in stressed or extreme conditions, including automotive and engineering applications. Two part epoxies are cold-cured, high-strength materials, which can be used where curing with heat is not an option. They cure when the two components are mixed together in the correct ratio. Product dependant, most versions are available in DELO-AUTOMIX cartridges, which present the two epoxy components (resin and hardener) in the correct ratio via a dispensing / mixing cannula. A wide range of curing properties are available, with rapid cure versions that are firm to touch in less than 10 minutes, to versions that are firm to touch in 8 hours. They offer high chemical resistance and are available in a wide range of viscosities. ** Click for more **

DELOMONOPOX epoxies are one part, heat cured epoxy resin adhesives for bonding, casting and sealing of joints. The epoxy resin adhesives are high strength materials that can be used as alternatives to riveting, welding and brazing in high stress applications. Epoxies exhibit excellent adhesion to metals, ferrites and ceramics. Special advantages of epoxies include their resistance to temperature, chemicals and low water absorption. They will also protect against corrosion. The epoxy resin is supplied ready to use with no mixing required. Curing occurs in 15-75 minutes @ 130-180 degrees C. Versions are available with good flow properties or with high run-off resistance. ** Click for more **

DELO-KATIOBOND UV curing (320-400nm) and light activated (400-550nm) epoxy adhesives are one part solvent free epoxies suitable for bonding, sealing and potting applications. DELO-KATIOBOND light activated adhesives can be used in opaque applications, as once the adhesive has been initiated via visible light, curing starts due to the decomposition of the photo-initiator and continues to completion. The curing is by cationic polymerisation, hence the product name Katiobond. Information on UV Curing Lamps can be found here. The range has good temperature resistance, up to 180 degrees C and excellent chemical resistance, making them ideal for automotive and harsh environment use. The epoxies are dry to touch after cure (no oxygen inhibition occurs). Cured products exhibit low shrinkage, resulting in low stress on delicate devices. Low water absorption and very low ionic content make them ideal for electronic applications. ** Click for more **

GRP FRP Pipes are widely used in various applications from drainage to sewerage and potable water. Typically available in a Vinylester or Epoxy resin, GRP FRP tubes are favoured for a number of reasons. Lightweight pipes make it easier (and cheaper!) to transport, handle and install. The pipes also have a high level of corrosion resistance from both the external environment and the internal flow. They also have a lower density, lower thermal expansion factor and a high strength to weight ratio. Elemy can supply various types of composite pipes DN 25 – DN 400 mm with Vinylester or Epoxy matrix and various pressure ratings and jointing configurations. • All pipes are plain end. • Pipes are supplied with an inner corrosion barrier 0.5mm – 2.5mm. • Large diameters available on request.

GRP FRP Flanges form a rim that protrudes from the end of a pipe. They have several holes that allow two pipe flanges to be bolted together, with a connection formed between the two pipes. A gasket may be fitted between two flanges to improve the seal. Flanges available: DN 25 – DN 2500 in GRV and GRE Cylindrical or Conical Inner configuration Pressure ratings 3, 6, 10, 16, 20, 25 and 32 bar Stub Flanges by Resin Transfer Moulding offer an excellent competitive solution with very high and constant quality. The dimensions comply with the specified standards for each particular diameter and pressure class. Various internal diameters are available to match all types of pipe. Diameters are available from DN 25 mm to DN 2500 mm. Pressure ratings from 3 up to 40 bar. SMC Stub Flanges Standard resin is Vinylester Derakane 411 or equivalent. RTM Stub Flanges Epoxy resin, Derakane 470 or other resin on request.