Damper - Import export

Suitable for emergency stop and continual use. Energy reduction: 25% to 45%. Dynamic force absorption: 218 N to 3730 N Impact velocity: max. 5 m/s. The profile dampers are maintenance-free and are supplied ready to install with a special fastening screw. Environment: Resistant to microbes, sea water, chemicals and with very good UV and ozone resistance. No water absorption or maceration. Application: Linear slides and linear guides, pneumatic cylinders, furniture industry, machines and plants.

Suitable for emergency stop and continuous use Energy reduction: 58% to 73% Dynamic force absorption: 870 N to 35190 N Impact velocity: max. 5 m/s. The profile dampers are maintenance-free and are supplied ready to install with a special fastening screw. Environment: Resistant to microbes, sea water, chemicals and with very good UV and ozone resistance. No water absorption or maceration. Fastening screws: Special cap screws with hex sockets, material 44SMn28 (free-cutting steel SAE 1144) electro zinc-plated: M6x9, M6x10, M8x14, M12x18, M16x26 ISO 4762 cap screws with hex sockets - 8.8 steel, black: M3x6, M4x8**, M5x10** ** With DIN 125 washer, electro zinc-plated steel. Application: Linear slides and linear guides, pneumatic cylinders, handling equipment, machines and plants

Outer body steel. Mounting bush plastic. Version: Steel electro zinc-plated. Note: Rotation dampers are maintenance-free, ready-to-install elements for the controlled braking and damping of rotational or linear movements. These rotation dampers enable the smooth opening and closing of small covers, compartments and drawers. They protect sensitive components and can also raise the quality and value of products. The rotation dampers brake right or left rotations or in both directions. One cycle rate corresponds to one 360° right rotation and one 360° left rotation. Attention: The rotation damper bush should not be used as a support, but rather as an external guide or bearing.

Partial Rotation Angle Damping torque 0.15 to 0.59 N･m The lifetime of TD38 can be ensured up to 300,000 cycles. The damping torque typically fluctuates from high to low. If necessary, we can customize and adjust the damping behavior to your requirement.

Partial Rotation Angle Damping torque 0.49 to 1.96 N･m TD27/28 is torque-adjustable damper and ready-to-mount design. And, the torque typically fluctuates from low to high. If necessary, we can customize and adjust the damping behavior to your requirement.

Continuous Rotation Angle Damping torque 2.45 to 3.92 N･m

Rotation angle max. 120° Damping torque 3.0 to 10.0 N･m

Partial Rotation Angle Damping torque 3.5 to 4.0 N ･ m TD129 damper can cover up to 4.0 N･m torque with the compact outer body Ø16 mm.

Partial Rotation Angle Damping torque 1.5 to 3.5 N ･ m TD118 damper can cover up to 3.5N･m torque even though all of the material plastic used.

Partial Rotation Angle Damping torque 0.45 to 2.94 N ･ m

Partial Rotation Angle Damping torque 0.98 to 2.94 N ･ m TD100 damper can cover up to 2.94 N ･ m toque with the compact body Ø16 mm.

Partial Rotation Angle Damping torque 0.98 to 1.96 N ･ m TD99 damper has chemical resistance thanks to being made of all PBT material. And, it can be used for both horizontal and vertical use application.

Continuous Rotation Angle Damping torque 10 to 40 mN ･ m

Partial Rotation Angle Damping torque 0.10 to 0.29 N ･ m TD75 is the most compact body Ø11mm in TOK partial rotation dampers.

Partial Rotation Angle Damping torque 0.10 to 0.29 N ･ m TD73 damper is the most compact body Ø11mm in TOK partial rotation dampers.

Partial Rotation Angle Damping torque 0.8 to 1.1 N ･ m SR3 damper is the state-of-the-art product which has two main features: ✔ Long lifetime: 300,000 cycles ✔ Automatic variable speed control

Partial Rotation Angle Damping torque 1.96 to 3.43 N ･ m TD69 damper can be used in up to 80°C temperature ambient thanks to the robust ULTEM™ material.

Partial Rotation Angle Damping torque 0.98 to 1.96 N ･ m TD60 has advantage on responsibility of damping thanks to the low backlash.

Continuous Rotation Angle Damping torque 300 to 800 mN･m The lifetime of TD58 can be ensured up to 200,000 cycles. And, the max. damping torque 800 mN･m is the largest in TOK continuous rotation dampers.

Partial Rotation Angle Damping torque 2.45 to 3.92 N･m The lifetime of TD22 can be ensured up to 100,000 cycles thanks to the zinc die-cast outer body. TD22 torque typically fluctuates from low to high. If necessary, we can customize and adjust the damping behavior to your requirement.

Partial Rotation Angle Damping torque 1.47 to 2.94 N･m TD56 damper is a low-backlash damper thanks to the inner structure.

Partial Rotation Angle Damping torque 4.90 to 8.83 N･m TD42 damper has a function which can reduce the backlash. And, this is ready-to-mount design with screws.