Results for
OTTO EICHHOFF GMBH & CO. KG
Germany
Simply headed articles (screws and bolts) with diameters ranging from 1.5 to 6 mm and a length of up to 650 mm. Possible materials: Regular steel, stainless steel, brass, copper, light metals. Available with all standard surfaces.
Request for a quoteOTTO EICHHOFF GMBH & CO. KG
Germany
Bolt with head (according to EN 22340) Bolt without head (according to EN 22341) Stud bolts (stress bolts) (according to DIN 2510) Blocking pins Fox bolts (according to DIN 1434 etc.) Spacer bolts Threaded bolts, threaded pins, stud bolts, threaded rods (according to DIN 913-916, 939, 976, 2510) Double-threaded bolts with rolled-on thread on one or both sides
Request for a quoteNORELEM FRANCE
France
Compact and light design, full loading on all sides. 4x safety factor against breakage in all loading axis. Rotatable 360°. Link swivel range max. 180°. The ball bearing allows the ring to rotate even under load. Lifting or securing loads, swivel rings have many uses. For the loading capacity to be valid it must be ensured that the ring is in line with the load. The swivel face must lie flat on the support beam and the screw must always be screwed in fully.
Request for a quoteNORELEM FRANCE
France
For high demand hoisting and carrying tasks in safety-relevant areas (machine construction, load handling equipment, lifting tackle). The CE mark is impressed into the ring bolt. F2 permissible load under max. 45° per ring bolt. On request: Certificate of conformity.
Request for a quoteNORELEM FRANCE
France
The Hygienic DESIGN fastening system was specially developed for use in food processing facilities. Special attention was paid to the cleaning-optimised geometry and a surface finish of Ra ≤ 0.8 µm. The quick and easy installation due to a pre-installed sealing washer rounds off the overall package.
Request for a quoteEC PLAZA
South Korea
Combining leading-edge tech. & PUNGKANG Co., Ltd’s unique know-how, an Enterprise that creates the future of Automotive parts industry. PUNGKANG Co., Ltd was established in 1974 as an enterprise which professionally manufactures Nuts for Automotive industry. Together with the continuous development of the Korean automotive industry over the past 48 years, PUNGKANG Co., Ltd has taken root deeply thru. unceasing efforts as an enterprise specializing in automotive parts that produces Nuts & Forged products and supplies to domestic / overseas automotive companies which satisfy high technology and quality level of the automobile industry.
Request for a quoteSOOCHOW ADVANCE INDUSTRIES CO., LTD.
China
Steel Bolt manufatured by CNC turning, Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.
Request for a quoteSOOCHOW ADVANCE INDUSTRIES CO., LTD.
China
Wireway Fastener material: aluminum alloy 6061-T4 thread grade: rolled/cut 3/8-18 NPSM thread x 0.39 +/-0.04 inch size: cap outer diameter 0.995-0.997 inch, height 2.50±0.03 inch cap slot - width 0.062±0.010 inch, depth 0.093±0.010 inch Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.
Request for a quoteSOOCHOW ADVANCE INDUSTRIES CO., LTD.
China
wireway fastener material: brass round cap, groove width 0.062±0.010 inch, depth 0.093±0.010 inch externally threaded, NPSM 1/8 inch, 0.38±0.03 inch diameter: 0.593±0.010 inch, 0.318±0.010 inch through hole diameter 0.218±0.010 inch, for wireway length: 1.31±0.03 inch chamfer 45°±30′ Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.
Request for a quoteSOOCHOW ADVANCE INDUSTRIES CO., LTD.
China
Lens Frame Fastener material: stainless steel 303 chamfer - both ends 0.09±0.03 inch thread grade: rolled 3/8-18 NPSM thread x 0.82±0.03 inch size: cap outer diameter 1.00±0.03 inch, height 1.38±0.03 inch cap groove - width 0.062±0.015 inch, depth 0.093±0.015 inch through hole diameter 0.39±0.03 inch, for wireway Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.
Request for a quoteZAMKO
Netherlands
Attacht 4 of these U-Bolts 400mm to your wooden pallet very easily , to secure your load. Very interesting for securing loads of round materials, like pipes. Made of heavy duty 8mm galvanized steel.
Request for a quoteZAMKO
Netherlands
Attacht 4 of these U-Bolts 200mm to your wooden pallet very easily , to secure your load. Very interesting for securing loads of round materials, like pipes. Made of heavy duty 8mm galvanized steel.
Request for a quoteNORELEM FRANCE
France
Bearing flanges and fastening pieces PAGF. Bolts steel. Black. Bolts electro zincplated. Two bearing flanges combined with a D50 type I aluminium profile tube (10050) form a feed roller (loadbearing roller). The bearing flanges are simply pressed into the aluminium profile tube. These can be used for many conveyance tasks. The bearing flanges have ball bearings and springloaded fastening spigots which enable transport rollers to be retrofitted into existing structures. A roller conveyor is created when several transport rollers are mounted in series. Two bearing flanges are required for a transport roller.
Request for a quoteNORELEM FRANCE
France
Industrial shock absorbers are maintenance-free, ready to install hydraulic components. They have an integrated fixed stop. The adjustable version enables precise adjustment to the desired dampening level. After installation, operate and adjust the shock absorber a few times until the desired braking level is achieved. Exceeding the max. energy intake per hour is possible if temporarily disconnected or the shock absorber is cooled with cylinder exhaust air. The installation position is arbitrary.
Request for a quoteNORELEM FRANCE
France
Individual filled gas springs are excluded from replacement. Gas springs are maintenance-free, self-contained systems that are filled with nitrogen under high pressure. For end-of-travel damping and lubrication, a defined amount of oil is also contained inside. The gas springs contain a nonreturn valve in a threaded pin on the pressurised pipe, which allows the pushing force to be lowered at a later time. Gas pressure springs in the sizes 04/12 and 06/15 must be stored and installed with the piston rod extending downwards. As of size 08/19, storage and installation in any orientation is possible. Keep in mind, however, that end-of-travel damping is effective only when the piston rod extends downwards. As a consequence of the physical properties when filling a gas spring, a tolerance range of ±5 % results for the rated pushing force. Gas springs are filled with nitrogen under high pressure and under no circumstances should they be opened or overloaded.
Request for a quoteNORELEM FRANCE
France
Suitable for emergency stop and continual use. Energy reduction: 25% to 45%. Dynamic force absorption: 218 N to 3730 N Impact velocity: max. 5 m/s. The profile dampers are maintenance-free and are supplied ready to install with a special fastening screw. Environment: Resistant to microbes, sea water, chemicals and with very good UV and ozone resistance. No water absorption or maceration. Application: Linear slides and linear guides, pneumatic cylinders, furniture industry, machines and plants.
Request for a quoteNORELEM FRANCE
France
Suitable for emergency stop and continuous use Energy reduction: 58% to 73% Dynamic force absorption: 870 N to 35190 N Impact velocity: max. 5 m/s. The profile dampers are maintenance-free and are supplied ready to install with a special fastening screw. Environment: Resistant to microbes, sea water, chemicals and with very good UV and ozone resistance. No water absorption or maceration. Fastening screws: Special cap screws with hex sockets, material 44SMn28 (free-cutting steel SAE 1144) electro zinc-plated: M6x9, M6x10, M8x14, M12x18, M16x26 ISO 4762 cap screws with hex sockets - 8.8 steel, black: M3x6, M4x8**, M5x10** ** With DIN 125 washer, electro zinc-plated steel. Application: Linear slides and linear guides, pneumatic cylinders, handling equipment, machines and plants
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
NORELEM FRANCE
France
Rubber buffers are widely-used construction elements for elastic mounting. They are used, among other things, as mountings for aggregates, motors, compressors, pumps and testing machinery.
Request for a quoteNORELEM FRANCE
France
The rubber buffers are widely-used construction elements for elastic mounting. They are used, among other things, as mountings for aggregates, motors, compressors, pumps and testing machinery.
Request for a quoteNORELEM FRANCE
France
Elastomer buffers are characterised by high load capacity, long service life and high economy due to being entirely maintenance-free. They also provide outstanding protection for persons and machines since the buffers do not rupture when overloaded. They are used to insulate and dampen air and structure-borne sound and offer progressive buffering characteristics with sustained excellent performance. They are also resistant to grease and oils and, in terms of performance and quality fulfil the requirements of the standard ISO 10069-1.
Request for a quoteNORELEM FRANCE
France
The receiver bush is for quick and safe insertion of ball operated lifting pins. They offer an easy and reliable installation in a variety of lifting materials. Also for use with thin walled materials and blind holes. They are corrosion resistant with low wearing.
Request for a quoteNORELEM FRANCE
France
Quick and easy lifting device with swing shackle and safety bar against unintended release. The balls are unlocked by pressing the push button. When the push button is released the balls are securely locked. Corrosion and weather resistant. High tensile, hardened pin for extreme loads with the high wear resistance. Temperature range max. 250 °C. CE certified. Values X max, and F1 with 5x safety factor. Accessory: Receiver bushes 07784.
Request for a quoteNORELEM FRANCE
France
Ball lifting pins are quick and simple lifting devices with swing shackles. The balls are unlocked by pressing the push button. After releasing the push button, the ball is securely locked. Protected against corrosion and weather-resistant High-strength, hardened, extremely durable pin. TÜV-tested. Values X min., F1, F2 and F3 with 5x safety factor.
Request for a quoteNORELEM FRANCE
France
Shackles and bolts may vary in colour. Paint may cause the thread to be stiff.
Request for a quoteNORELEM FRANCE
France
Reinforced threaded inserts allow threaded holes which have been damaged, torn out or jammed to be used again or to be repaired. This makes it possible to recover scrap and rejects of expensive products. Reinforced threaded inserts are suitable for use in various materials, including light metals and casting. Inserts with internal threads larger than M6 are supplied with four locking pins instead of two. Permissible deviations: The medium tolerance class applies to the threads listed, i.e. 6H for nut threads and 6g for bolt threads. Other dimensions ±0.25 mm. With reinforced threaded inserts we also offer a version with a stronger cross-section for use in applications with greater stress. Technical information see operating instructions for threaded inserts.
Request for a quoteNORELEM FRANCE
France
Self-tapping threaded inserts for making high-strength, wear-free, vibration resistant screw connections in materials with low shear strength such as aluminium and aluminium alloys, brass, bronze, cast iron, duro and thermoplastics. The threaded inserts are tapered at the bottom and have a cutting slot. By screwing in they cut their own threads inside a receiver hole. This guarantees a completely secure and firm anchoring in the host material. Internal thread D1 acc. to ISO 6H. The threaded inserts with cutting slot spring slightly inwards in the slot region in some materials. This results in a screw locking effect. If this is not desired, we recommend the threaded inserts with a cutting bore.
Request for a quoteNORELEM FRANCE
France
The required torque is set by a set screw and a graduated scale. The set value can be secured using the lateral clamping screw. When the set torque is reached the grip audibly and palpably releases. The loosening torque is higher than the tightening torque so that the torque handle can be released without any problems. The internal thread version has a hole in the set screw so that the torque handle can also be used on threaded rods. Set torque accuracy ± 5%. On request: Other thread lengths.
Request for a quoteNORELEM FRANCE
France
Steel class 45 H, black. Stainless steel A 2-70, bright. Drawing reference: L2 = approx. 2x thread pitch
Request for a quoteNORELEM FRANCE
France
Form A: Ball element case-hardened and black oxidised. Form B: Bright. Form C: Ball element case-hardened and black oxidised. Form D: Ball element bright. Form G: Ball element case hardened and black oxidised, foot with anti-slip plate. Note: The anti-slip plate absorbs vibrations and prevents the swivel foot slipping The loading indicated in the table is a recommendation up to which permanent static load the swivel foot can be used.
Request for a quoteResults for
Bolted - Import exportNumber of results
90 ProductsCountries
Company type
Category