Results for
METAL IN LTD
Bulgaria
The company is subcontractor of metal details and components of furniture industry, as some of the main products are: metal construction for tables Folding mechanism for beds, sofas and stools Medical beds with adjustable height А device for lifting patients Feet for tables, sofas and stools Feet for tables, sofas and stools Bunk beds Beds and desks that fold to the wall Mechanisms for lifting and lowering of the mattress Metal cabinets Metal boxes
Request for a quoteHOMESHOP
Poland
Smart car charger with safe charging function. Automatic voltage division - Regardless of which port we connect the phone to, its energy will be renewed at the maximum possible speed. In the case of charging 2 devices, the voltage will be properly divided and matched to specific devices. Safe charging - In addition, the accessory adjusts the voltage to the device's charge level. Regeneration of energy starts from a slower ceiling, then accelerates to the maximum allowed speed, to slow down again after exceeding 80% and finish the charging process calmly. Thus taking care of the condition and safety of the battery.
Request for a quotePRAXAS B.V.
Netherlands
Meet our high-accuracy Lascar EL-WiFi-TP+ Temperature Logger WiFi with External Probe! With a measuring range of -40 to 125°C (-40 to 257°F), this sensor allows you to remotely monitor any environment. The data is periodically uploaded via a standard WiFi network to the EasyLog Cloud or a single host PC. The sensor comes with a thermistor probe and a handy mounting clip, so you can attach it easily and quickly. With the EasyLog Cloud you always have access to all data collected, from any internet-enabled device. Adjust settings remotely, receive email notifications of the alarm, link sensors from multiple locations to one account, and assign multiple users
Request for a quoteFERPLAST SNC
Italy
Manual stapler, extremely compact and light, suitable for stitching cardboard boxes. Body with a special aluminum alloy and depth/dot shape adjustment. Each model can use two measures of 15 and 19 mm points by simply turning the adjusting device.
Request for a quoteIDG-DICHTUNGSTECHNIK GMBH
Germany
Kaplan turbines are typically used for river power plants on calm waters. The blade angle runner blades (Kaplan blades) is adjustable. The pressure of the water flow, which is controlled by the guide vanes of the upstream wicker gate, can then be efficiently converted into energy. The bidirectional MANOY® system seal WP, type 444, in the form of a continuous ring was developed to protect the hydraulic adjustment device and prevent hydraulic fluid leakage. Type 449 is particularly useful for maintenance work because rather than being continuous in circumference, the seal is open and has a guide blade.
Request for a quoteKULLEN-KOTI GMBH
Germany
For this brush type we use standardised vee-belt profiles, made of polyester elastomers and immune to moisture, oil and grease as well as resistant to numerous chemicals. Therefore an application is possible in a temperature range from -15°C to +80°C. They can be produced in all lenghts requested, open ended or endless closed belt. Mainly natural hairs and bristles, plant fibres and synthetic bristles (PA, PP, etc.) are used, so all kinds of brush surface - from very soft to very hard - can be obtained according to the material quality chosen. For the endless vee-belt brushes you normally have to use a belt pre-tension of 3% of the distance between the pulleys (a). In order to obtain this we recommend that an adjustment device (such as a slot) is used with an adjustment range of 5% of the distance between the pulleys (a). You can use standardised drive pulleys to drive the belt brushes.Please ensure the diameters of the deflection pulleys are correct in order to obtain an...
Request for a quoteKULLEN-KOTI GMBH
Germany
We can produce flat-belt brushes in any length requested, open ended or endless. They are mainly equipped with natural hairs or bristles, plant fibres or synthetic bristles. Depending on the fill material a brush surface from very soft to very hard can be obtained. As belt qualities we supply the multilayered types 5,8 mm or 7,0 mm (belt thickness) with a cover sheet and running surface made of chrome leather and an integrated polyamide insert. They are suitable for temperatures from -15°C to +80°C. When using endless closed belts, belt pre-tension is an important factor.For our types 4,8 mm to 9,5 mm we normally use a belt pre-tension of 1,5 to 2% of the distance between the pulleys (a). In order to obtain this we recommend that an adjustment device (such as a slot) is used with an adjustment range of 5% of the distance between the pulleys (a). Please ensure the diameters of the deflection pulleys (d) are correct in order to obtain an adequate looping of the belt. We advise you...
Request for a quoteFERPLAST SNC
Italy
Solid and professional battery stapler, available in 2 models for staples 35 mm wide and 19-22 mm long. Equipped with stitching depth adjustment device. The tool comes complete with lithium-ion battery with life up to 800 points for charging, enough for a continuous work throughout the day. A second replacement battery is included. Sewing machines for cardboard completely portable Quick charge in 45 minutes Up to 800 points per charge No need for compressors or airlines Application effortless compared to hand tools 2 models to clamp staples from 15 mm to 22 mm Penetration of the staple and type of rewriting adjustable
Request for a quoteFERPLAST SNC
Italy
Manual stapler light and handy for closing cardboard boxes with points made of metal, provided with a device for adjusting the depth of stitching. It uses staples in finger width mm. 35 and length mm. 15/19/22.
Request for a quoteFERPLAST SNC
Italy
The strapping machine with side head is recommended in all sectors in which, with traditional machines, processing residues such as grease, liquids, etc., cause operating problems. The SP92-E is suitable for products with minimum dimensions of 10x50x100 mm; uses strap with a width of 12 mm and a maximum thickness of 0.65 mm. Equipped with worktop with adjustable height and device for automatic shutdown, after 60 sec. of inactivity.
Request for a quoteFERPLAST SNC
Italy
AIR BOXER pneumatic stapler for fast and efficient stitching. Used mainly for the closure of the upper part of the boxes. Pneumatic stapler models available in 5/8 - 3/4 - 7/8, for staples auburn mm. 35/15 - 35/19 - 35/22 in the finger. Equipped with a device for adjusting the depth of the stitching.
Request for a quoteFERPLAST SNC
Italy
Manual stapler particularly robust, suitable for the top closure of cardboard boxes. Available in 3 models for staples with width mm. 35 and depth mm. 15-19-22 and is provided with a device for adjusting the depth of stitching.
Request for a quoteWEBER FOOD TECHNOLOGY GMBH
Germany
Flexible and powerful: the conveyor derinder ASB 600 for artisanal and medium-sized companies with a wide range of applications. The combination machine can be used open with a carriage table or closed with a height-adjustable pressure device and infeed belt. In conveyor operation, all cuts, such as cheek, belly and loin of pork, as well as fat on shoulder and ham are derinded automatically. In open operation, suitable for derinding all round cuts, such as ham, shoulder or knuckle. Advantages Optimal results: clean removal of the rind without residues Infinite adjustment of the rind/cutting thickness Equipped with two operating speeds as standard Compact, movable via fixed and guide rollers Option: Pressure rollers in various hardnesses and air pressing roller Discharge belt Special voltage
Request for a quoteTROTEC GMBH
Germany
The oil heaters of the IDE-series are good valued solutions with solid technology for typical standard heating jobs with direct warmth. The fuel supply of the oil fired direct IDE devices take place with help of a compressor. For a desired temperature adjustment all IDE devices have an integrated thermostat. If the temperature should be measured and controlled at a place with a distance of 25 meters away from the heater you can use the optionally available extern thermostat. The fuel level of the integrated fuel tank can be read on the fuel level display. Convincing practical advantages: Very economical solution for standard oil heaters Integrated fuel tank with fuel level display Electronic flame safeguard Overheating protection Stainless steel fire combustion chamber Integrated thermostat Connection for external thermostat Chassis for easier movement
Request for a quoteTROTEC GMBH
Germany
The Oil Heater of the IDE series are budget saving solutions with solid technology for typical standard heating tasks with direct warmth on site. For heating applications outdoors the Oil Heater of the IDE series are best prepared thanks to the sturdy housing made of double painted material. The large air outlet guarantees a maximum warm air expansion with high efficiency, which is 100 % at the direct fired models. For a desired temperature adjustment all IDE devices have an integrated thermostat. If the temperature should be measured and controlled at a place with a distance of 25 meters away from the heater, you can use the optionally available extern thermostat. The fuel level of the integrated fuel tank can be read off on the fuel level display. Benefits in practise: Very economical solution for standard oil heaters Integrated fuel tank with fuel level display Electronic flame safeguard Overheating protection Stainless steel fire combustion chamber
Request for a quoteSIKO GMBH
Germany
Easy Touch Control ETC5000 is the plug + play basis for a complete format adjustment system. The intuitively operated control systems of ETC5000 is designed to control up to 31 bus-compatible position indicators or actuators. Whether monitored format adjustment via digital position indicators or fully automated format adjustment via actuators –The system provides you with the flexibility you need. Control system for position indicators and actuators. Intuitive touchscreen control concept for format adjustment. Up to 31 devices can be actuated. Single or set positioning. RS485 and USB interfaces.
Request for a quoteTROTEC GMBH
Germany
The oil heaters of the IDE-series are good valued solutions with solid technology for typical standard heating jobs with direct warmth. The fuel supply of the oil fired direct IDE devices take place with help of a compressor, whose pressure is displayed on a manometer. For a desired temperature adjustment all IDE devices have an integrated thermostat with a dual display for set value and actual value. If the temperature should be measured and controlled at a place with a distance of 25 meters away from the heater you can use the optionally available extern thermostat. The fuel level of the integrated fuel tank can be read on the fuel level display. Convincing practical advantages: Very economical solution for standard oil heaters Integrated fuel tank with fuel level display Electronic flame safeguard Overheating protection Stainless steel fire combustion chamber Integrated thermostat with a dual display for set value and actual value
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
AVOLA MASCHINENFABRIK A. VOLKENBORN GMBH & CO. KG
Germany
Avola GAMA 80 V carpenter’s circular saw bench for professional applications Equipment / scope of supply- Motor rating 22 kW (P1) / 400 Vac-50 Hz star delta start gear drive - Motor speed rpm 3.000 / sawblade speed rpm 2.200 - Cutting height 90° / 310 mm – 45° / 217 mm – 30° / 149 mm - Electrical sawblade inclination 90 – 30° - Revolving table 0-270° - Machine table with lateral movement 650 mm - Automatic vertical pneumatic clamping cylinders right / left - Laser light for cross cutting - TCT-sawblade, 800 x 30 x T90 - Dust extraction spigots 160 / 160 / 80 / 80 mm - Sawblade height adjustment via mechanical stop system, with measuring scale, easy to adjust - DUO infeed / outfeed devices
Request for a quoteSFS GROUP GERMANY GMBH
Germany
The FireBird® Pro S Gold Edition with mechanical setting stroke adjustment. When setting a blind rivet nut size of the same length in consistent material thicknesses constant setting stroke should be used. The setting stroke corresponds to the distance the mandrel is drawn into the nose piece during the setting process and thus how far the blind rivet nut is upset. With the setting stroke adjustment this path can be set mechanically on the setting tool. Customer benefits of setting stroke adjustment: • Device control via setting stroke adjustment guarantees a constant height of the blind rivet nut after setting • Stepless setting of the setting stroke • Setting stroke adjustment is preferred above all by experienced users and for large production runs Technical data, working range and advantages are analogous to FireBird® Pro Gold Edition More details on delivery limits will be answered in a specific enquiry (details are only exemplary)!
Request for a quoteKUZEY GLOBAL
Turkey
Synchronized forming and cutting by tilting movable lower platen to 80 degrees Sheet pitched by double toothed chains and move on abrasion resistant slide plates; Lengthened pan design allows to reach optimum forming heat without using pre-heater machine Upper and lower Mold ; heats control by indivudial Thermoregulation device Fine adjustment for mold by electric drive. Traversing and tilting moving system of mould PLC for control the line operation and supervise working parameters Opportunity to set one or more forming cycles without cutting by pneumatic drive High production capacity with resistant to high speed Strong and vibration free main body Double inlet- outlet system for fast cooling by increasing water discharge. Energy analyzer which gives amount of the electric consumption Cutting adjustment possible by digital meter ,controlled by PLC. Plug asist motor
Request for a quoteKUZEY GLOBAL
Turkey
Synchronized forming and cutting by tilting movable lower platen to 85 degrees Sheet ; pitched by double toothed chains and move on abrasion resistant slide plates; Precise heater control for upper and lower pan. Upper and lower Mold ; heats control by indivudial Thermoregulation device Fine adjustment for mold by electric drive. PLC for control the line operation and to supervise working parameters Non-stop working capacity with easy maintain mechanical system. Safety system ensured by sensors such as sheet sagging , pressure drop,door ajar situations Water and Heat balance measure sensors for mold which can be control by PLC system Energy analyzer which gives amount of the electric consumption Cutting adjustment possible by digital meter ,controlled by PLC. Plug asist motor and plug speeds all controlling by PLC suitable to put variotions of movement to plugs to plugs,start slow go fast end slow etc
Request for a quoteWALTER UHL TECHNISCHE MIKROSKOPIE GMBH & CO. KG
Germany
stable iron cast stand with manual z-adjustment and coarse dovetail drive video system with high resolution camera, integrated incidend- and transmitted illumination X/Y micro-manipulators for the prism fixture and the vacuum tip
Request for a quoteMSY INVEST BV
Belgium
Your four-legged friend just won't stop barking when someone approaches the front door? If the constant barking disturbs not only the neighbors and the mailman but also yourself, then it is truly time for the bark to stop! This flexibly places able box ultrasonic sounds that are inaudible to humans but extremely unpleasant for dogs. This is a completely painless way for the animal to finally stop barking! This waterproof device can be adjusted to two different intensities and immediately emits an ultrasonic sound as soon as the barking starts. Effective up to 6 meters. Delivery includes a wall mount. Material: ABS. Operates with one Battery type 9V (not included).
LITAN - ESTANTES METÁLICAS, LDA
Portugal
The Multi-Position telescopic ladders allow an easy adjustment in order to facilitate reaching the desired height Auto lock safety system Height adjustment through an auto lock device Extremely versatile Easy transportation Fast assembly Easy storage Slip-resistant feet Light weight Available on the versions from 3 to 5 steps for flight TECHNICAL SPECIFICATIONS: Lateral profile with Interior 66x25mm Exterior 75x31mm Steps with 30x30mm with slip-resistant reliefs WARRANTY: 2 Years USE: DIY and Professional
Request for a quoteLITAN - ESTANTES METÁLICAS, LDA
Portugal
The Multi-Position telescopic ladders allow an easy adjustment, which facilitates reaching the desired height Height adjustment through an auto lock device Extremely versatile Easy transportation Easy handling Ideal to use in uneven surfaces Easy storage Available on the version of 4 steps for flight TECHNICAL SPECIFICATIONS: Lateral profile with Interior – 40x20mm Exterior – 45x25mm Steps with 30x20mm WARRANTY: 2 Years USE: DIY
Request for a quoteLITAN - ESTANTES METÁLICAS, LDA
Portugal
The Multi-Position telescopic ladders allow an easy adjustment in order to facilitate reaching the desired height Auto lock safety system Height adjustment through an auto lock device Extremely versatile Easy transportation Fast assembly Easy storage Slip-resistant feet Light weight Available on the versions from 3 to 6 steps for flight TECHNICAL SPECIFICATIONS: Lateral profile with Interior 66x25mm Exterior 75x31mm Steps with 30x30mm with slip-resistant reliefs WARRANTY: 2 Years USE: DIY and Professional
Request for a quoteLITAN - ESTANTES METÁLICAS, LDA
Portugal
CHARACTERISTICS: The Multi-Position telescopic ladders allow an easy adjustment, which facilitates reaching the desired height Height adjustment through an auto lock device Extremely versatile Easy transportation Easy handling Ideal to use in uneven surfaces Easy storage Available on the version of 4 steps for flight TECHNICAL SPECIFICATIONS: Lateral profile with Interior – 40x20mm Exterior – 45x25mm Steps with 30x20mm WARRANTY: 2 Years USE: DIY
Request for a quoteLITAN - ESTANTES METÁLICAS, LDA
Portugal
CHARACTERISTICS: The Multi-Position telescopic ladders allow an easy adjustment in order to facilitate reaching the desired height Auto lock safety system Height adjustment through an auto lock device Extremely versatile Easy transportation Fast assembly Easy storage Slip-resistant feet Light weight Available on the versions from 3 to 5 steps for flight TECHNICAL SPECIFICATIONS: Lateral profile with Interior 66x25mm Exterior 75x31mm Steps with 30x30mm with slip-resistant reliefs WARRANTY: 2 Years USE: DIY and Professional
Request for a quoteLITAN - ESTANTES METÁLICAS, LDA
Portugal
CHARACTERISTICS: The Multi-Position telescopic ladders allow an easy adjustment in order to facilitate reaching the desired height Auto lock safety system Height adjustment through an auto lock device Extremely versatile Easy transportation Fast assembly Easy storage Slip-resistant feet Light weight Available on the versions from 3 to 6 steps for flight TECHNICAL SPECIFICATIONS: Lateral profile with Interior 66x25mm Exterior 75x31mm Steps with 30x30mm with slip-resistant reliefs WARRANTY: 2 Years USE: DIY and Professional
Request for a quoteResults for
Adjustment devices - Import exportNumber of results
70 ProductsCountries
Category