Acrylic glass - Import export

With fako® Polishing paste No.9311 a care product is available, which is specially developed for the properties of Plexiglas, other acrylic glass and plastics. Polishes deep scratches and scrapes. Matt surfaces become clear again, scratches and scrapes are removed. Unsightly panes become flawless again! The treatment process is quite simple. Clean dirty surfaces with clear lukewarm water and a clean, soft viscose sponge until adhering dirt is removed. Put some fako® Polishing paste No. 9311 with lint-free fako® special polishing cloth on the moistened surface and polish under pressure in circular movements until the surface is dry. Polish to a gloss with another dry fako® special polishing cloth until the residues are removed and the surface is dry and clear. When removing deep scratches, the polishing process may cause matt spots. In this case we recommend an after-treatment with fako® Polishing milk No.9322.

Our care products specially developed for Plexiglas help you to maintain the beauty and value of the material for years and decades. In comparison to silicate glass, two properties must be taken into particular consideration when caring for and cleaning acrylic glass. On the one hand the lower surface hardness and therefore higher susceptibility to scratches of acrylic glass, on the other hand the susceptibility of acrylic glass to solvents, especially organic ones. The use of incompatible polishing materials can cause stress cracks and matt surfaces. With fakopol® a care product is available, which is specially developed for the properties of Plexiglas, other acrylic glass and plastics. It has both cleaning and polishing action, removes wipe scratches and marks and is ideal for finishing of industrially manufactured parts. Gives long-lasting protection and glossy deep shine. The treatment process is quite simple.

fako® cleaning and polishing milk no. 9322 is a maintenance agent at your disposal that especially meets the demands of Plexiglass and other acrylic glasses, plastics as well as gel coat finish and fiberglass. It is used for regular care, removal of marks, dirt and minor scratches, oxidation, yellowing and chalking, gives plastics optimum protection with dust-repellent properties and preserves their natural brilliance. Matt panes become radiantly clear again. Maintenance is simple and straight forward with excellent results. The use of fako® Polishing milk does not lead to stress-corrosion cracking.

 2-3-4-5-6-8-10-15-20mm THICKNESSES AND 1350x200 – 1500x300 - 2050x3050 Sizes The light transmittance is 92% compared to glass. Its resistance to impacts is 6 times higher than glass. It is not sharp-edged. It does not cause injury when broken. Its heat transmittance is 20% less than half thickness glass. • (Cast) Plexiglas is resistant to climatic conditions. It is produced in opaque, transparent and fluorescent colors and is more resistant to climatic conditions than plastics. Does not fade, does not break. It can be used easily indoors and outdoors. • (Cast) Plexiglas is heat resistant. Casting Plexiglas softens from 75°C according to its thickness and becomes ready to shape. • (Cast) Plexiglas is of copper hardness. • The desired form can be easily given to (Cast) Plexiglas. 120°-150° C is sufficient for Alglas Plexi to take the desired form. After cooling, the form you give remains stable. made in TURKEY

have a transparent structure made of acrylic glass in aluminum joinery. It adds a different beauty to your facility in terms of showing the indoor environment or benefiting from the external light and aesthetically. It has spring break safety system, rope break safety systems and lower safety systems in panel type sectional door systems. It perfectly meets all kinds of industrial needs.

Use our industrial manufacturing expertise for your products too ,Manufacture of silicone or aluminium moulds ,Gas internal pressure procedure (GIP) Processing of sheet plastic (cutting, milling, bending) More information available at https//www.geck.de

Design CNS 18/10. With IRK-halogen infrared-quarz radiator. Substructure: hot plate with retaining lip, thermostatically adjustable from 30-100°C. With hygienic protection made of acrylic glass.

A classic name badge with a curved surface. Our name badge "Balance" is available in different colours and heights. Depending on the place of use, you decide on one of the fastening options. This can be magnetic or with needle. Your inlay can be changed at any time and is protected by an acrylic glass window.

Design: Frame structure made of anodized special light metal-profiles, side walls and separating walls made of melamin resin laminated panels, completely surrounded by U-profile.Rear- and front side open. Tray supports made of chromium plated tubular material. Mounted on 4 corrosion protected, ball bearing castors with distance holding bumpers, 2 of them lockable. With acrylic glass doors (completely faced with melamine panels).

Removes strongly adherent organic residues as well as coverings of nicotine, fat, silicone and rubber wear Suitable for in- and outdoor application Cleans aluminium and stainless steel parts, plastics, glass, chrome and rubber For the manifold application in the section of gastronomy, office and automotive, for hobby and sport equipment like e.g. kitchen furnishing, bars, mirrors, window glasses and frames, glass surfaces, tiles, china, screens, machine housings, boats, caravans, surfboards, bikes, polycarbonate screens and acryl glass, visor of helmets, windscreens, lights, a.s.o. Advantages and benefits Easy application and through the active cleaning foam ideal suitable for vertical areas, no expiration Cleans material-gentle and without leaving stripes or streaks behind Does not attack paints, rubber or plastic and acts colour-refreshing Pleasant, citric like odour, eudermic Free from toxic substances like chlorine, CFC, PCB Silicone free Suitable for acryl-glasses

Discover a wide range of high-quality spacers for signs and panels made of acrylic glass, Plexiglas or glass. Whether made of robust stainless steel, lightweight aluminium or elegant brass - you'll find the ideal wall spacer for securely mounting signs, posters and paintings. Also suitable for mounting glass table tops. For larger requirements made to measure or according to drawings, we will also be happy to provide you with a customised quote for spacers.

KIRSCH Kunststofftechnik has specialised in lasering transparent or coloured plastics like acrylic glass, up to a maximum thickness of 20 mm. The advantage when cutting is a shiny edge which does not need to be polished afterwards. We are offering a variable processing size up to 2000 x 1500 mm. Following individual arrangements we are also able to process other plastics. Our laser can be programmed using common files, making your ideas and wishes nearly limitless.

Elegant acrylic glass doorplate with plastic insert. Screws on, assembly set included. • CRYSTAL SIGN doorplate range made from acrylic in 7 formats • Easy to exchange the foils by separating the two acrylic panels • Suitable for use in offices, conference rooms, lobbies and many other prestigious premises • Screws on, assembly set with drilling template and instructions included • For inserts 105 x 105 mm • Suitable printable insert labels: Article number 483019

Suitable for pre-cleaning and degreasing a wide variety of components and surfaces. Nitro combo paints and many adhesives can be thinned with the acetone. Acrylic glass and plastics can be bonded very well with acetone. Other sizes available on request

HODA, UAB performs additional processing of plastic parts – industrial silk screen printing services. Instrument panels, molded parts, cases, control panels and bezels can be screen printed. Acrylic, aluminum, glass, stainless steel, steel and plastics can be screen printed. Screen printing can be done on curved surfaces, recessed surfaces, textured surfaces, flanges and inside boxes. Markets served include medical, consumer products, military, automotive, electronics, electrical & telecommunications.

The large format laser machine Wattsan 1610 LT is designed for cutting and mass production of products from non-metallic materials. The device provides high-precision machining with a positioning accuracy of up to 0.01mm, and is easy to use and durable. Engraving : wood, plywood, cardboard, plastics, rubber, leather, fabric, fur, plexiglass (acrylic), PET, MDF, glass, stone etc. Cutting: wood, plywood, cardboard, paper, plastics, plexiglass (acrylic), leather, fabric, fur, PET, MDF, rubber, paronite, foam rubber. Through table The most important advantage of our machine is its ability to work with unlimited lengths of material. Three Phase Stepper Motors They are characterized by increased accuracy and reliability, as well as provide a smaller step when engraving.

The Wattsan 1290 Duos ST laser machine is an advanced medium format model for laser cutting and engraving of non-metallic materials. The two heads work synchronously with a minimum distance of 130 mm from each other, thus the machine can simultaneously cut or engrave two identical objects. Engraving : wood, plywood, cardboard, plastics, rubber, leather, fabric, fur, plexiglass (acrylic), PET, MDF, glass, stone etc. Cutting : wood, plywood, cardboard, paper, plastics, plexiglass (acrylic), leather, fabric, fur, PET, MDF, rubber, paronite, foam rubber. Through table The most important advantage of the 1290 DUOS is the ability to work with unlimited material lengths. The fact is that the design of the equipment allows you to remove the front wall and use the freed-up space for through cutting. Work area = 1200 x 900 mm

The Wattsan 6090 LT laser machine is an advanced medium-format model for laser cutting and engraving of non-metallic materials. Due to its convenient working area, of 900x600mm, it is often used in industries, such as souvenirs, advertising, design, light, home decor, outdoor signage, stencils, etc. There are two versions of this model, with a lifting table and without. The lifting table is equipped with a chain that allows modifying the height of the working area. That allows working with heavy products up to 80 kg, for example, stone. Engraving : wood, plywood, cardboard, plastics, rubber, leather, fabric, fur, plexiglass (acrylic), PET, MDF, glass, stone etc. Cutting : wood, plywood, cardboard, paper, plastics, plexiglass (acrylic), leather, fabric, fur, PET, MDF, rubber, paronite, foam rubber. Unique cutting head We design our machines with universal cutting heads with wide and narrow nozzles. The wide nozzle blows away combustion residues and promotes better engraving.

A new and revolutionary generation of adhesive projection films, is a flexible screen that does not use any chemical solvent or glue to stick We developed a dry polymer that sticks on transparent surfaces such as glass, acrylic or PVC. Because there is NO adhesive layer. Can be stuck on and peeled off without any limit. KITAPON The rear projection Kitapon adhesive film allows permanent or temporary installations in indoor conditions. Image sizes from 75 to 2.15 cm wide. 6 different kinds of screen quality available: CONTRAST (rear). DIFFUSION (rear). HOLO-G (rear). 360° (visible on both sides). ULTRA CONTRAST (rear). FRONT (front). Custom made possibilities. STIKI The rear projection Stiki adhesive film allows permanent installations in indoor conditions.Image sizes from 75 to 270 cm wide. Stiki is a new and revolutionary generation of adhesive projection films. STIKI is a flexible adhesive screen, for permanent mounts, that sticks on transparent surfaces such as glass, acrylic...

The eurolaser laser cutting machine M-1200 for acrylic glass is a compact model with a processing area of 1,330 mm x 1,230 mm (52.3" x 48.4"). Just like all eurolaser laser cutting machines the sealed-off laser technology in connection with exchangeable modular assembly groups reduces the lifecycle costs to a minimum. An investment which pays off! The requirement-focused modular design enables eurolaser laser systems to be specially configured to suit every requirement and at the same time provides the necessary flexibility. The system design is focused mainly on requirements that are generated from later use.

The laser cutter M-800 with a processing area of 1330 x 830 mm (52.3" x 32.6") is well-prepared for all applications in the fields of laser cutting and engraving of acrylic glass (Plexiglas ®, Perspex ®). A special feature is the optional shuttle table system, which almost doubles your productivity, enabling you to hold all the aces even with a “smaller“ laser cutter. The requirement-focused modular design enables eurolaser laser systems to be specially configured to suit every requirement and at the same time provides the necessary flexibility. The system design is focused mainly on requirements that are generated from later use.

The laser cutter size XL-1600 is the professional solution for the laser processing of acrylic glass. With its modular concept and the easy handling it offers a future-oriented and efficient investment – just like all other laser cutting systems. With cutting and engraving tests performed on your individual materials we determine in advance the optimal configuration of your laser cutter.

Thermo-insulating, anti-condensation, sound absorbing, anti-mould water-based paints for interiors Base of special acrylic resins, hollow glass beads and fungicide additives with wide spectrum of action. super Opaque, thixotropic, breathable, excellent whiteness, resistance to alkali and washing. Thanks to the special composition, which gives the product the mould characteristics and low thermal conductivity, is specified for the definitive resolution of all phenomena related to the failure or bad thermal insulation of walls, ceilings and Particulars of thermal bridges, like phenomena of condensation and phenomena of formation of moulds or mushrooms. Color: white Package: Trunk 4-14 LT Usage: Internal Yield: 2.8/3.2 sqm/lt dry thickness 300 micron Dilution: From 15% to 25% by weight with clean water • Roller ready to use Recommended application thickness: 300 micron dry

The SP2000 Laser Cutter is a CO₂ laser cutter for processing large format materials. — Processing area: 1680 x 2510 mm — Laser power: 60 - 400 W With SP Laser Cutter you can engrave or cut the following materials: Acrylic, glass (engrave), wood, plastic, leather, metal (engrave), paper, stone (engrave), textiles, and many more. Jobcontrol® Laser Software: SP Laser Cutters come with intuitive software that can be learned in no time. SP Laser Cutter Product Benefits: — InPack Technology™: protects laser components for high quality cutting results. — Tandem Assistant: allows virtual division of the work surface into two zones. — Versatile Access: freely accessible work surface from all sides. — Adaptable: Wide range of processing tables and accessories.

Spa base was made by Taiwanese acrylic with pearl pigments. Install glass or engineered stone bowls.

The Speedy 300 laser engraver is a laser device for engraving and cutting different materials. It is available with CO2 or fiber laser. — Processing area: 726 x 432 mm — Laser power: C02 flexx: 30 - 120 W — Laser power fiber flexx: 20 - 50 W With the Speedy laser engraver you can engrave or cut the following materials: acrylic, glass (engraving), wood, plastic, leather, metal (engraving), paper, stone (engraving), textiles and more. Ruby® laser software: The Speedy laser comes with our intuitive laser software Ruby®. Speedy laser product advantages — Flexx technology (optional): a CO2 and fiber laser in one device. — CeramiCore®: a unique laser source for high-quality engravings and a long laser service life. — InPack TechnologyTM: Protects the laser components for high-quality engraving results. — Interchangeable processing tables: a range of different processing tables for perfect engraving and cutting results

The SP2000 Laser Cutter is a CO₂ laser cutter for processing large format materials. — Processing area: 1680 x 2510 mm — Laser power: 60 - 400 W With SP Laser Cutter you can engrave or cut the following materials: Acrylic, glass (engrave), wood, plastic, leather, metal (engrave), paper, stone (engrave), textiles, and many more. Jobcontrol® Laser Software: SP Laser Cutters come with intuitive software that can be learned in no time. SP Laser Cutter Product Benefits: — InPack Technology™: protects laser components for high quality cutting results. — Tandem Assistant: allows virtual division of the work surface into two zones. — Versatile Access: freely accessible work surface from all sides. — Adaptable: Wide range of processing tables and accessories.

The Speedy 100 laser engraver is a laser device for engraving and cutting different materials. It is available with CO2 or fibre laser. — Processing area: 610 x 305mm — Laser power: C02 flexx: 30 - 60 W — Laser power fiber flexx: 20 - 30 W With the Speedy laser engraver you can engrave or cut the following materials: acrylic, glass (engraving), wood, plastic, leather, metal (engraving), paper, stone (engraving), textiles and more. Ruby® laser software: The Speedy laser comes with our intuitive laser software Ruby®. Speedy laser product advantages — Flexx technology (optional): a CO2 and fiber laser in one device. — CeramiCore®: a unique laser source for high-quality engravings and a long laser service life. — InPack TechnologyTM: Protects the laser components for high-quality engraving results. — Interchangeable processing tables: a range of different processing tables for perfect engraving and cutting results