3d images - Import export

Medecom offers 3 modules that can be installed on the diagnostic workstations: - Tomosynthesis Module + It allows the visualization of BTO images acquired from equipment of any tomosynthesis mammography manufacturers + Images of interest can be selected and exported to PACS or the Med Archive. This allows an optimized management of the quantity of images saved. - The CAD Module + 2D or 3D from any CAD manufacturer + Very useful for diagnostic assistance - The MIP/MPR Module + is a useful module for CT and MRI images + Tool for dental images

Let virtual and mixed reality transform your preoperative training in surgical planning and skills. PRE-OPERATIONAL PLANNING: Get the complete image before entering the operating room. SURGICAL SKILLS TRAINING: Enhanced learning through virtual and mixed reality.

In addition to the Sam3D software, the following equipment will be used to carry out the postural assessment assisted by 3D imaging Sam3D TOWER image acquisition device 24" All In One computer Sam3D TOWER software Sam3D reference ground plate Marking pen Sam3D Roll-Up or Sam3D Wall Adhesive

The terrestrial 3D laser scanner Z+F IMAGER® 5016 combines compact and lightweight design with state-of-the-art 3D laser scanning surveyor technology - allowing the user to reach new levels. It's equipped with an integrated HDR camera, internal lighting and positioning system. All components of the terrestrial 3D laser scanner have been further developed and adjusted to the new design, resulting in even better scanning results and a more efficient workflow. Dimensions Usable in smallest spaces Carry-on luggage size Weight Laser scanner without battery: ≤ 6,5 kg (14.3 lbs) Laser scanner with 2 batteries: ≤ 7,5 kg (16.5 lbs) Ideal weight for stable setup Makes field work easier

The terrestrial 3D laser scanner Z+F IMAGER® 5016A combines compact and lightweight design with state-of-the-art 3D laser scanning surveyor technology - allowing the user to reach new levels. It's equipped with an integrated HDR camera, internal lighting and positioning system. All components of the terrestrial 3D laser scanner have been further developed and adjusted to the new design, resulting in even better scanning results and a more efficient workflow. With feature A, which stands for Advanced, the 5016 receives twice as high scan rate of up to 2.187 million pixels/second and more options for leveling the scanner. If the dynamic compensator is deactivated or the tilt is outside the defined range, the tilt is detected by the IMU of the Z+F IMAGER® 5016A.

Based on the high quality laser scanner Z+F IMAGER®, Zoller + Fröhlich GmbH and DMT GmbH & Co. KG have developed an explosion proof 3D laser scanner. The Z+F IMAGER® 5006EX pioneers surveying in underground mining and industries where explosive atmospheres occur. The Z+F IMAGER® 5006EX is the world´s first ATEX approved 3D laser scanner for use in mining and industrial applications under explosive conditions.The Z+F IMAGER® 5006EX is class I and class II approved according to ATEX directive 94 / 9 / EG. The ATEX directive 94 /9 / EG "Equipment and protective systems intended for use in potentially explosive atmospheres" is a European standard. The ATEX approval for this equipment is widely accepted outside the European community as well.

THE POWERFUL PROCESSING SOFTWARE FOR LIDAR DATA Import, process and manage your LiDAR data from terrestrial, handheld, mobile, airborne laser scanners and easily integrate UAV and 3D imaging data in a single platform. Thanks to the LineUp® Pro technology, automatically align your 3D scans, even without targets! Import point clouds, meshes, CAD models Automatic alignment also without targets Post-processing, analysis and output export

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The YXLON Cougar EVO series was designed to provide the "best-in-class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market. - Optimized design and new ultrasharp monitor - Simplified, enhanced, and reliable X-ray inspections - Exceptional 2D/3D image quality in the shortest time - User-friendly FGUI interface - Minimal system footprint for limited space

Best-in-class scalable X-ray inspection systems for assembly and laboratory applications. The YXLON Cheetah EVO series was designed to provide the "best-in-class" inspection solution for SMT, semiconductor, and laboratory assembly applications. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market. - Exceptional 2D/3D image quality in the shortest time - User-friendly operation for high-tech inspections - One-click solutions for advanced manipulation- Best-in-class DR technology

The Leica M-Series comprises high-performance Stereo Microscopes for reliable applications in industry and materials science. Due to the large zoom and magnification range, various different task can be executed without changing the objective. The unique FusionOptics technology combines depth of field with high resolution and visualizes remarkably more details of the sample in an especially vivid 3D image. Coded components enable a reliable reproduction of the results. Comprehensive range of accessories for individual demands: LED-illumination, ergonomic modules, digital cameras and software modules. Zoom and magnification range: Leica M125: 12.5:1 / 8x – 100x Leica M165 C: 16.5:1 / 7.3x – 120x Leica M205 A / C: 20.5:1 / 7.8x – 160x

Applications: - Real-time A-scan & A-scan Capture - B-scan & SLICE - Threshold Mapping (post-processing) - Frequency Domain Imaging (FFT) - C-scan with Multi-gate SALI & SALI Groups - Cluster Analysis (post processing) - Advanced Time-of-Flight & Thickness Measurements - Scan Math Before and After Reflow Characterization - 3D Imaging - Void Gating (real-time) Available modes: - A-Scan - Patch Scan - Top Scan - Counterfeit Detection - B-Scan - Focus B - Sub B - Cross B - C-Scan - Dual Gate - SALI - SALI Groups - TX-Scan - Concurrent PE/TX - D-Scan - 3D

The Texel Portal BX is a fullcolor 3D scanner for scanning people. Fill in the registration form, start the scan and in just 30 seconds you will get a fulllength accurate 3D image of yourself. Portal BX is more than a 3D scanner. It is a complete complex which consists of a hightech scanner and software from Texel. While the scanner analyzes the person standing on the platform, special algorithms prepare to take over. In just 1 minute in the Texel Cloud the results of the scan turn into a realistic 3D model. Portal BX requires minimal human input and only requires registration with your name and email in order to receive the link to the model. You can share the link with your friends on social media right from our cloud. We have automated and simplified everything that was possible scanning, processing data, building 3D models and preparing them for production.

SHINING3D developed the Transcan C as a professionalgrade 3D scanner capturing exceptionally high resolution and accurate scans of objects from small to medium size for a great variety of industries. In addition, the 12 MP cameras produce rich and detailed textured 3D model, giving an intuitionistic image of the physical object. Adjustable scanning range to meet various object scanning needs. Smoothly shift between 3 levels of resolution in one project to create great etail with high efficiency. 12 MP professional color cameras provide rich and detailed color textured 3D model.The sliderail design enables an easy switch of the scanning range between 150 mm x 96 mm and 300 mm x 190 mm meeting the needs of scanning objects of different sizes effectively.The MultiResolution Fusion Algorithm allows a mixture of 3 levels of resolution of high, medium or low in one project for complex scanning tasks, which highly improves efficiency without duplication of work.

Dedicated image enhancement, 3D reconstruction and metrology software for scanning electron microscopes (SEM) SEM image colorization made easy - Go from black and white to color effortlessly in just a few clicks. Superfast 3D reconstruction of surface topography in a matter of seconds - from SEM anaglyphs, two successive SEM scans at different tilt angles or four SEM images obtained by a 4 quadrant detector. 3D enhancement for single SEM images. Real-time 3D visualization at any zoom level or angle – SEM image overlays on 3D topography for enhanced rendering. SEM image enhancement and correction – automatic bi-colorization, colored 3D intensity maps, enhanced 3D rendering, configurable lighting and height amplification, gray level drift correction and denoising. Topography measurements - distances, step heights, areas, volumes, dimensioning of profile contours and cross-sections extracted from surfaces. Characterization of surface roughness and texture – advanced roughness/waviness filtering techniques – 2D and 3D parameters from Ra to ISO 25178. Advanced surface analysis of small objects, structures and features – morphology, grains and particle sizes and more. Correlative SEM studies – combine SEM images from different detectors (SE + BSE) – colocalize SEM images and 3D surface data from AFM/SPMs and overlay SEM images on 3D topography.

Dedicated imaging, analysis and metrology software for scanning 3D surface profilometers using contact or non-contact techniques - including stylus profilers, laser triangulation profilers, confocal point sensor profilers, auto-focus profilers and white light interferometers Compatible with all scanning 3D surface profilometers used for surface analysis and metrology. Real time 3D imaging of surface topography - at any zoom level, angle and height amplification. Correct measurement artifacts - spikes, anomalous scan lines, missing data points, tip impact. Analyze surface geometry - distances, angles, areas, volumes, step heights, coplanarity. Apply advanced roughness/waviness filtering techniques - defined in ISO 16610. Analyze surface texture - in accordance with the latest ISO and national standards, including ISO 25178 and ISO 4287. Extract and analyze sub-surfaces - study them just like full measured surfaces. Increase profilometer vertical range virtually in software - combine measurements made at different heights. Easy integration into lab and production environments - export of all numerical results. Add optional modules for advanced surface texture and form analysis, contour analysis, grains and particles analysis, FFT-based analysis and more.

Dedicated surface imaging, analysis and metrology software for 3D optical microscopes and profilers measuring topography - confocal microscopes, interferometric microscopes, digital holographic microscopes, focus variation microscopes & structured light systems Compatible with all 3D optical profilers and microscopes used for surface analysis and metrology. Real time imaging of 3D surface topography with near-perfect lighting. 3D surface overlays for fast feature location - overlay color and intensity images on 3D topography. Remove data acquisition artifacts - outliers, local defects. Increase field of view virtually - assemble measurements using surface topography stitching. Analyze roughness and surface texture - in accordance with the latest ISO and national standards. Analyze surface geometry - including volume of surface structures (bumps, holes), step heights. Extract and analyze regions of interest - study them in the same way as full measured surfaces. 3D reconstruction of multi-focus images - reconstruct 3D topography from multi-focus image stacks. Easy integration into lab and production environments - export of all numerical results. Easy publication - export analysis documents, pages and individual images up to 1200 dpi. Add optional modules for advanced surface texture analysis, contour analysis, grains and particles analysis, 3D Fourier analysis, image co-localization, statistics and more.

Dedicated Scanning Probe Microscope imaging, analysis and metrology software (SPM, AFM, STM, CSAFM, KPFM, MFM, NSOM, etc.) Compatible with all scanning probe microscope techniques for nano surface imaging and analysis. Real time 3D multi-channel imaging of SPM topography, phase, defection, current, auxiliary and other layers including overlays. High quality SPM imaging with powerful image optimization and enhancement tools. Intelligent SPM image artifact correction, scan line by line leveling, noise filtering. Comprehensive nano surface analysis including nano-geometry and roughness. Numerous optional modules including AFM force curve analysis and colocalization of SPM images with SEM and other images. Smart user interface for maximum ease of use combined with powerful automation features - including multiple topography image stitching - to accelerate analysis. Easy integration into research and lab environments including export of numerical data and images for easy post-processing and publication.

A 3D scanning is like a digital 3D photography of the real world – but where each pixel in a digital photo only contains information about colour, each pixel in our “3D images” further contains information about it's position in XYZ coordinates in space. We can scan everything – from cars, airplanes, ships, factories to processing plants, bridges, tunnels, buildings you name it. We have several different scanners – among others a FARO FOCUS X330 that can scan from 0,6 mm up to 330 meters with a length-precision of +/- 2 mm! A laser scanning produces a so-called point cloud, which can be imported in all common CAD programs: #AutoCAD #Inventor #Revit #Navisworks

The In-Sight 3D-L4000 is a breakthrough in three-dimensional (3D) vision technology. This unique vision system combines 3D laser displacement technology with a smart camera allowing factory engineers to quickly, accurately, and cost effectively solve a wide variety of inspections. The patented speckle-free blue laser optics, an industry first, acquires high quality 3D images and on-board high-performance processing powers a comprehensive set of true 3D vision tools, without the need for external processing. 3D vision tools are set up as easily as 2D vision tools thanks to the familiar and robust In-Sight spreadsheet environment. The intuitive In-Sight spreadsheet interface quickly and easily sets up and runs 3D applications without the need for programming. The In-Sight 3D-L4000 provides the capability to combine 2D and 3D vision tools in a single job to solve a wider variety of applications.

The 3D-A5000 offers a variety of fields of view and measurement ranges to accommodate applications in the automotive, consumer goods, and logistics industries. Other features and benefits include: — Patent-pending 3D LightBurst technology enables rapid image acquisition — More than 1.5 million 3D data points detect fine features on parts — High Dynamic Range (HDR) mode captures scenes with high contrast — Powerful 3D tools in VisionPro solve challenging 3D applications — Factory-calibration delivers results in real-world units — Rugged IP65-rated housing provides protection in harsh factory environments

Mantis is an award-winning ergonomic 3D stereo microscopes which offer exceptional operator comfort and superb 3D imaging. No awkward eyepieces and no hunched posture, operators can increase productivity through a stress-free viewing experience, seeing more and doing more than is possible with conventional microscopes. Mantis provides superb 3D imaging, but also allows freedom of head movement which means that operators can view around the subject, instead of being restricted to a 2D, top-down, view. Use it for inspection, preparation, manipulation tasks, and is ideal for quality inspection of assemblies, repairs and reworks, sample preparation, dissection and more. Mantis Elite-Cam HD features an integrated HD camera, with versatile image and video capture software, plus the ability to add annotations. A range of powerful software packages provide on-screen dimensioning, enhancement and documentation and analysis tools. Magnification range 2-20x

Our design team use the very latest Computer Aided Design software which can illustrate both 2D and 3D images of the fabrics. This reduces the time taken to show designs to customers as well as reducing the cost of sampling. Having designed fabrics we can illustrate how they would look on furniture or in a garment. Complicated weaves can be seen in cross-section. We have access to ranges of coloured yarns from around the world and keep many colours in stock. Custom colours can be dyed to match customers own colours on a wide selection of different yarn counts and fibre blends. ** Click for more **

The IdentPro Warehouse Execution System increases inventory visibility and productivity in the traditional warehouse with lift trucks to an unmatched level. The AI-based software, complemented by LIDAR and IoT sensor technology, takes the burden off forklift drivers to scan barcodes or remember storage locations. All goods movement are automatically tracked. A real time 3D image of your warehouse is permanently synchronized with your management systems such as WMS and ERP. All transport orders are processed fully digital and are monitored for correct execution. Your lift truck drivers only do what they do best: moving goods. You benefit from a productivity increase of up to 25%. Learn more on www.identpro.de/en