GTH 2448/1 – NiCr-Ni
GTH 2448/2 – Pt100, 1 °C
GTH 2448/3 – Pt100, 0.1 °C
GTH 2448/4 – Pt1000, 1 °C
GTH 2448/5 – Pt1000, 0.1 °C
Measurement range, resolution:GTH 2448/1: -50 to +1,150 °C (NiCr-Ni)
GTH 2448/2: -200 to + 650 °C (Pt100, 2-conductor)
Precision: (at nominal temperature = 25 °C):NiCr-Ni: ±1% ±1 digit (from -20 to +550 °C or 920 to 1,150 °C)
NiCr-Ni: ±1.5% ±1 digit
Offset adjustment:The sensors zero offset can be adjusted with the aid of the offset trimmer on the rear of the device
Display:3½-digit, red, 10 mm high LED display.
Sampling frequency:approx. 3 measurements / sec.
Operating temperature:0 to 50 °C (permissible ambient temperature)
Relative humidity:5 to 95% r.h. (non-condensing)
Storage temperature:-20 to 70 °C
Power supply:8–20 V DC or 18–29 V DC (standard) (can be set with a solder joint)
Current consumption:max. 20 mA
Housing:Glass-fibre reinforced Noryl, front panel PC.
Dimensions:24 x 48 mm (H x W) (front frame dimension)
Installation depth:approx. 65 mm (incl. screw/plug terminals)
Panel attachment:with VA spring clip.
Possible panel thicknesses:from 1 to approx. 10 mm
Panel cut-out:21.7+0.5 x 45+0.5 mm (H x W).
Connection terminals:4-pin screw/plug terminal
Protection class:front IP54 (with optional O-rings, IP65).
Sheathing resistance thermometer Ni120 without wire with flexible sheathing design
Measurement range:-50 °C to +550 °C
Electrical resistance:Ni120
Ci...
The compression-type fittings are the link between the thermocouple and the test area and facilitate precise adaptation. After installing the compress...
Use:
Multiple Jack for thermocouple and RTD circuits. Suitable for connecting up to 6 standard circuits simultaneously.
Mechanical design:
• Strong s...
Use:
Connectors for thermocouples and resistance thermometer measurement circuits. Suitable for measurement with small wires and mineral-insulated met...
This inline thermocouple can be individually installed. For measurements in the wiring harness, on difficult to access points or on the smallest compo...
Sheathing thermocouples can be used anywhere due to their ruggedness and small design. Whether in industry, development or in the lab. The measurement...
Use:
Connectors for thermocouples and resistance thermometer measurement circuits. Suitable for measurement with small wires and mineral-insulated me...
Sheathing resistance thermometer Pt1000 with wire and flexible sheathing design
Measurement range:-50 °C to +550 °C
Electrical resistance:Pt1000
Tole...
Sheathing resistance thermometer Pt1000 with wire and flexible sheathing design
Measurement range:-50 °C to +550 °C
Electrical resistance:Pt1000
Tole...
This sensor for measuring exhaust gases was developed together with a Formula 1 team. The goal was to achieve the greatest possible reliability during...
Application:
Grommet can be fitted in the entrance hole of the connector to prevent moisture and dirt from entering the connector. Has limited strain ...
Sheathing resistance thermometer Ni120 without wire with flexible sheathing design
Measurement range:-50 °C to +550 °C
Electrical resistance:Ni120
Ci...
The compression-type fittings are the link between the thermocouple and the test area and facilitate precise adaptation. After installing the compress...
Use:
Multiple Jack for thermocouple and RTD circuits. Suitable for connecting up to 6 standard circuits simultaneously.
Mechanical design:
• Strong s...
Use:
Connectors for thermocouples and resistance thermometer measurement circuits. Suitable for measurement with small wires and mineral-insulated met...
This inline thermocouple can be individually installed. For measurements in the wiring harness, on difficult to access points or on the smallest compo...
Sheathing thermocouples can be used anywhere due to their ruggedness and small design. Whether in industry, development or in the lab. The measurement...
Use:
Connectors for thermocouples and resistance thermometer measurement circuits. Suitable for measurement with small wires and mineral-insulated me...
Sheathing resistance thermometer Pt1000 with wire and flexible sheathing design
Measurement range:-50 °C to +550 °C
Electrical resistance:Pt1000
Tole...
Sheathing resistance thermometer Pt1000 with wire and flexible sheathing design
Measurement range:-50 °C to +550 °C
Electrical resistance:Pt1000
Tole...
This sensor for measuring exhaust gases was developed together with a Formula 1 team. The goal was to achieve the greatest possible reliability during...
Application:
Grommet can be fitted in the entrance hole of the connector to prevent moisture and dirt from entering the connector. Has limited strain ...