Threaded spherical joint on ball bearing DIN ISO 12240-4 - Spherical joints
Threaded spherical joint on ball bearing DIN ISO 12240-4 - Spherical joints

Threaded spherical joint on ball bearing DIN ISO 12240-4 - Spherical joints

The hardened ball bearing is long-term lubricated and equipped with flanges. The connection dimensions comply with DIN 648, series KA. The spherical ends are perfectly suited for the transmission of movements in the absence of precise alignment. Up to D = 10, the spherical ends are equipped with a DIN 3405/A funnel grease fitting. From D = 12, the grease fitting is conical DIN 71412/A. Reference: 27625 Material: Steel, forged Finish: Zinc-plated Bearing clearance: 15 - 40 µm
Similar products
1/15
Threaded spherical joint on smooth igubal® bearing similar to - Spherical joints
Threaded spherical joint on smooth igubal® bearing similar to - Spherical joints
Ball joints have high rigidity and are resistant to variable loads. They are impervious to dirt, dust, and lint. They offer resistance to corrosion an...
FR-10280 Fontaines Les Gres
Flat Countersunk Head Screw DIN EN ISO 7380 - Fastening Elements
Flat Countersunk Head Screw DIN EN ISO 7380 - Fastening Elements
Steel grade 10.9, polished or electro-galvanized. Stainless steel A2-70, polished. Stainless steel A4-70, polished. Note: DIN EN ISO 7380-1 - Shape A:...
FR-10280 Fontaines Les Gres
Ball Joint - Supports and Positioning Feet
Ball Joint - Supports and Positioning Feet
Ball Joint - Supports and Positioning Feet Reference: 02110 Ball Joint: machining steel, hardened Base: Machining steel Finish: Bruni...
FR-10280 Fontaines Les Gres
Pneumatic round cylinders din iso 6432 double-acting with - Pneumatic cylinder
Pneumatic round cylinders din iso 6432 double-acting with - Pneumatic cylinder
Doubleacting pneumatic cylinder acc. to DIN ISO 6432. Piston rod with external thread, position detection for proximity switch and flexible damping on...
FR-10280 Fontaines Les Gres
Ball-end thrust screws without head with full ball long-lok - Ball-end thrust screws and baseplates
Ball-end thrust screws without head with full ball long-lok - Ball-end thrust screws and baseplates
Ball-end thrust screws with full ball are used when a clean, polished contact surface is required. Reference:07105...
FR-10280 Fontaines Les Gres
Single Acting Ball Stop - Bearings
Single Acting Ball Stop - Bearings
Outer ring, inner ring, and steel ball bearings. Steel cage. Single-acting axial bearings support high axial loads but should not be subjected to radi...
FR-10280 Fontaines Les Gres
Swivel Ball Screw with CHC Head - Swivel Ball Screw and Pin Inserts
Swivel Ball Screw with CHC Head - Swivel Ball Screw and Pin Inserts
Shape A is used for all applications requiring a support point. Shape B is used for machined flat surfaces with an inclination not exceeding 9°. Drawi...
FR-10280 Fontaines Les Gres
Roll dowel heavy duty iso 8752 - Parallel blocks, T-slot nuts, cylindrical pins
Roll dowel heavy duty iso 8752 - Parallel blocks, T-slot nuts, cylindrical pins
The nominal diameter of the pin is the same as the receiving hole diameter. The recommended hole tolerance is ISO H12. Due to the chamfered end, the p...
FR-10280 Fontaines Les Gres
Pneumatic cylinders din iso 15552 standard cylinder - Pneumatic cylinder
Pneumatic cylinders din iso 15552 standard cylinder - Pneumatic cylinder
Doubleacting pneumatic cylinder in constructionoptimised design acc. to DIN ISO 15552. Piston rod with external thread, position detection and adjusta...
FR-10280 Fontaines Les Gres
Compact Steel Ball Linear Bearings - Ball Linear Bearing
Compact Steel Ball Linear Bearings - Ball Linear Bearing
Steel bearing sleeve. Plastic cage. Steel balls. With seals on both sides. The linear ball bearings are secured with retaining rings according to DIN ...
FR-10280 Fontaines Les Gres
Trapezoidal thread nuts round double-start rh thread - Trapezoidal threaded spindles and trapezoidal threaded nuts
Trapezoidal thread nuts round double-start rh thread - Trapezoidal threaded spindles and trapezoidal threaded nuts
Steel C35Pb. Gunmetal Rg7. Plastic PA6.6 with MoS2). ISO trapezoidal thread based on DIN 103. Steel nuts for adjustments during manual operation and a...
FR-10280 Fontaines Les Gres
Stainless Steel Linear Ball Bearing - Linear Ball Bearing
Stainless Steel Linear Ball Bearing - Linear Ball Bearing
Outer envelope: stainless steel. Cage: stainless steel. Ball: stainless steel. The linear ball bearings correspond to series 3 according to ISO 10285...
FR-10280 Fontaines Les Gres
Swivel ball screw with HC head in stainless steel with flat - Swivel ball screw and spike inserts
Swivel ball screw with HC head in stainless steel with flat - Swivel ball screw and spike inserts
These ball screws are used for machined flat surfaces with an inclination not exceeding 9°. The longer models can be glued onto handles or buttons. Th...
FR-10280 Fontaines Les Gres
Flat Head Screw DIN 913 - Slide Screws and Pads
Flat Head Screw DIN 913 - Slide Screws and Pads
Nylon brake safety. Finish: Steel: strength class 45 H, black. Stainless steel: A 2-70, polished. Drawing indication: L2 = ~2x pitch Reference: 07165...
FR-10280 Fontaines Les Gres
Ball head screw in hygienic design - Connecting elements
Ball head screw in hygienic design - Connecting elements
Ideal elements for fastening cladding panels, Plexiglas covers etc. The oversized flange and the thread undercut ensure a stress-free, uniform force d...
FR-10280 Fontaines Les Gres

The europages app is here!

Use our improved supplier search or create inquiries on the go with the new europages app.

Download in the App Store

App StoreGoogle Play