Flat Head Screw DIN 913 - Slide Screws and Pads
Flat Head Screw DIN 913 - Slide Screws and Pads

Flat Head Screw DIN 913 - Slide Screws and Pads

Nylon brake safety. Finish: Steel: strength class 45 H, black. Stainless steel: A 2-70, polished. Drawing indication: L2 = ~2x pitch Reference: 07165 Material: Steel or Stainless Steel (A 2) Steel: strength class 45 H, black Stainless Steel: A 2-70, polished
Similar products
1/15
Flat Countersunk Head Screw DIN EN ISO 7380 - Fastening Elements
Flat Countersunk Head Screw DIN EN ISO 7380 - Fastening Elements
Steel grade 10.9, polished or electro-galvanized. Stainless steel A2-70, polished. Stainless steel A4-70, polished. Note: DIN EN ISO 7380-1 - Shape A:...
FR-10280 Fontaines Les Gres
Swivel Ball Screw with CHC Head - Swivel Ball Screw and Pin Inserts
Swivel Ball Screw with CHC Head - Swivel Ball Screw and Pin Inserts
Shape A is used for all applications requiring a support point. Shape B is used for machined flat surfaces with an inclination not exceeding 9°. Drawi...
FR-10280 Fontaines Les Gres
Ball-end thrust screws without head with full ball long-lok - Ball-end thrust screws and baseplates
Ball-end thrust screws without head with full ball long-lok - Ball-end thrust screws and baseplates
Ball-end thrust screws with full ball are used when a clean, polished contact surface is required. Reference:07105...
FR-10280 Fontaines Les Gres
Reinforced welded plates - Torque screws and threaded inserts
Reinforced welded plates - Torque screws and threaded inserts
Threaded inserts are a quick and cost-effective way to restore seized, stripped, or damaged threads. They also allow for the restoration of the thread...
FR-10280 Fontaines Les Gres
Ball lock pins stainless steel with high shear strength - Ball lock pins
Ball lock pins stainless steel with high shear strength - Ball lock pins
Ball lock pins are used for easy fastening or joining of components. The two balls are disengaged by pressing the push button and the pin can be slipp...
FR-10280 Fontaines Les Gres
Swivel ball screw with HC head in stainless steel with flat - Swivel ball screw and spike inserts
Swivel ball screw with HC head in stainless steel with flat - Swivel ball screw and spike inserts
These ball screws are used for machined flat surfaces with an inclination not exceeding 9°. The longer models can be glued onto handles or buttons. Th...
FR-10280 Fontaines Les Gres
Trapezoidal screw with simple pitch, right-hand thread or left-hand
Trapezoidal screw with simple pitch, right-hand thread or left-hand
Trapezoidal threaded rods and trapezoidal nuts - Case hardening steel 1.0401 (C15) or Stainless steel 1.4301 (stainless steel rolled screws in 1.4305)...
FR-10280 Fontaines Les Gres
Hex head bolts stainless steel with seal washer in hygienic - Connecting elements
Hex head bolts stainless steel with seal washer in hygienic - Connecting elements
The Hygienic DESIGN fastening system was specially developed for use in food processing facilities. Special attention was paid to the cleaning-optimis...
FR-10280 Fontaines Les Gres
Smooth or Spiked Insert - Swivel Ball Screw and Spiked Inserts
Smooth or Spiked Insert - Swivel Ball Screw and Spiked Inserts
The pin inserts are primarily used for mounting in clamping arms, clamping systems, clamping devices, clamping jaws, and oscillating ball supports. Th...
FR-10280 Fontaines Les Gres
Roll dowel heavy duty iso 8752 - Parallel blocks, T-slot nuts, cylindrical pins
Roll dowel heavy duty iso 8752 - Parallel blocks, T-slot nuts, cylindrical pins
The nominal diameter of the pin is the same as the receiving hole diameter. The recommended hole tolerance is ISO H12. Due to the chamfered end, the p...
FR-10280 Fontaines Les Gres
Stainless Steel Fixing Socket for Pin Lifting Ring
Stainless Steel Fixing Socket for Pin Lifting Ring
Fixed and swivel lifting rings, self-locking pin rings - The support sleeves provide safe and quick fastening solutions for ball pin lifting rings. Th...
FR-10280 Fontaines Les Gres
Sprockets single 3/8" x 7/32" din iso 606 ready to install - Chains and sprockets
Sprockets single 3/8" x 7/32" din iso 606 ready to install - Chains and sprockets
Ready to install sprockets with hub on one side for DIN ISO 606 roller chains. Teeth are milled and inductively hardened. Keyway acc. to DIN 6885 / BS...
FR-10280 Fontaines Les Gres
Stainless Steel Stop Pin with L Handle and Locking - Stop Pin
Stainless Steel Stop Pin with L Handle and Locking - Stop Pin
Self-locking retaining pins allow for the quick and easy assembly or fixation of components. Pressing the push button unlocks the two balls, thereby ...
FR-10280 Fontaines Les Gres
Clamp straps din 6314 straight steel or aluminium - Stepped clamps
Clamp straps din 6314 straight steel or aluminium - Stepped clamps
Steel painted. Aluminium bright. Note: When using spherical washers use the wide series 07420 Form G. Reference:04080 Material:Carbon steel or EN AW-...
FR-10280 Fontaines Les Gres
Simple Sprockets 3/4" x 7/16" Stainless Steel DIN ISO 606 - Chains and Sprockets
Simple Sprockets 3/4" x 7/16" Stainless Steel DIN ISO 606 - Chains and Sprockets
Sprockets with a hub on one side for roller chains according to DIN ISO 606. The sprockets have a centering point or are pre-drilled (this may vary de...
FR-10280 Fontaines Les Gres

The europages app is here!

Use our improved supplier search or create inquiries on the go with the new europages app.

Download in the App Store

App StoreGoogle Play