Magnetic welding angle PA - Permanent Magnet Welding Angles
Magnetic welding angle PA - Permanent Magnet Welding Angles

Magnetic welding angle PA - Permanent Magnet Welding Angles

The Pivot magnetic welding angle has a holding angle range from 28 to 270 degrees. The Pivot magnetic welding angle is a universal handyman for smaller welding and assembly work on round and flat material. Through the quick release and a scale, the angle can be set simply and precisely. Components can be clamped on the inside or outside. Each leg can be switched on and off through a rotary switch. PA:Item No. 60343
Similar products
1/15
Neostar - Permanent Magnetic Chucks
Neostar - Permanent Magnetic Chucks
These Neostar magnetic chucks can be used universally, in particular for internal cylindrical grinding, rotating and hard rotating. The uniform radia...
DE-73525 Schwäbisch Gmünd
ASO 930 | ASO 930 Plus - Selfpropelling chamfering machine
ASO 930 | ASO 930 Plus - Selfpropelling chamfering machine
The automatic weld-chamfering machines from the ASO 930 series are for stationary and portable use in weld seam preparation. The attachment of large w...
DE-73525 Schwäbisch Gmünd
MT-A - Battery-operated electric grinder
MT-A - Battery-operated electric grinder
It is the perfect battery-operated tool for deburring, separating, grinding and polishing. Due to its unrestricted mobility, the MT-A enables conti...
DE-73525 Schwäbisch Gmünd
SMA 60 - BHV | -BER - Handheld electric chamfering machine
SMA 60 - BHV | -BER - Handheld electric chamfering machine
The SMA 60 is available in an electrical, compressed-air or high-frequency design. The machine is designed for handling steel, aluminum, copper and pl...
DE-73525 Schwäbisch Gmünd
EPRadial - Electropermanent Magnetic Chucks
EPRadial - Electropermanent Magnetic Chucks
The uniform radial pole division offers significant advantages compared to magnetic chucks with parallel pole or square pole division in particular wh...
DE-73525 Schwäbisch Gmünd
MMB 400 B | MMB 500 L | MMB 600 C - Angle adjustable chamfering machine
MMB 400 B | MMB 500 L | MMB 600 C - Angle adjustable chamfering machine
The sturdy chamfering machines are designed for chamfering, edge chamfering and welding seam preparation. The machines can process sheet thicknesses f...
DE-73525 Schwäbisch Gmünd
Electropermanent Lifting Magnet EPMH
Electropermanent Lifting Magnet EPMH
The electropermanent load lifting magnets from the EMPH series are suitable for the lifting and transportation of individual slabs and unprocessed blo...
DE-73525 Schwäbisch Gmünd
Magnetic welding angle SW - Permanent Magnet Welding Angles
Magnetic welding angle SW - Permanent Magnet Welding Angles
Robust and maintenance-free 90° magnetic clamping angle for flat material. The permanent magnet welding angle is a classic from Assfalg for welding a...
DE-73525 Schwäbisch Gmünd
AY Series - Magnetic Gripper for Automation
AY Series - Magnetic Gripper for Automation
The AY series was developed specifically for sheet handling. They can measure technically with vacuum systems in the thin sheet area and are much more...
DE-73525 Schwäbisch Gmünd
AR Series - Magnetic Gripper for Automation
AR Series - Magnetic Gripper for Automation
The AR series was specifically designed for workpieces that do not have any level contact surfaces. They are only switched on or off with a short comp...
DE-73525 Schwäbisch Gmünd
AQ 1 | AQ 3 - Control unit for electric grinder
AQ 1 | AQ 3 - Control unit for electric grinder
The control units AQ1 and AQ3 are equipped with 1 and 3 motor connections respectively and are designed for all Assfalg handpiece electric grinders.
DE-73525 Schwäbisch Gmünd
ASO 600-ASL - Deburring machine for Contours
ASO 600-ASL - Deburring machine for Contours
The ASO 600-ASL edge and contour deburring machine is designed for chamfering small to medium-sized workpieces. The refined machine features, such as ...
DE-73525 Schwäbisch Gmünd
SMA 40 -BER | -APV - Handheld electric | pneumatic chamfering machine
SMA 40 -BER | -APV - Handheld electric | pneumatic chamfering machine
The SMA 40-A series is available in an electrical or compressed-air operated design. The machine is designed for handling steel, aluminum, copper and ...
DE-73525 Schwäbisch Gmünd
Control units - For Electropermanent Magnetic Chucks
Control units - For Electropermanent Magnetic Chucks
The electronic reverse polarity controllers are used to turn the magnetic clamping plates on and off and to regulate the holding force in several stag...
DE-73525 Schwäbisch Gmünd
EDG 213 | EDG 1226 - Drill grinder
EDG 213 | EDG 1226 - Drill grinder
The handy drill grinders are ideal for grinding HSS- and VHM spiral drills. HSS drills are ground with CBN grinding discs and VHM drills with diamond ...
DE-73525 Schwäbisch Gmünd

The europages app is here!

Use our improved supplier search or create inquiries on the go with the new europages app.

Download in the App Store

App StoreGoogle Play