wire resistors

...Wire bridges and wire resistors are made from bare, tinned, silver-plated, coated, and insulated wires. The insulation materials used include PVC, PTFE, ETFE, and silicone, and they are processed using particularly material-friendly methods. The wire diameters to be processed range from 0.2 to 4.0 mm. Packaging can be done as loose bulk, axially or radially strapped, in blister strips, or in magazines.

...Cemented wire wound rheostat, in protection class IP00, for installation, connection to screw terminals The product group of wire-wound rheostats includes individual elements as well as the rheostat devices built from them in various protection and mounting types. Depending on the requirements, these resistors are also manufactured with motor drive for both direct and alternating current.

... advantage of electric heaters is further enhanced by the TDS 10 M ceramic heater blower, as it is equipped with PTC ceramic instead of wire resistors. The advantages of PTC over heating coils: greater durability, less delicate technology, faster heating, overheating protection based on the process, and a heating process without dust combustion, which makes these ceramic heaters non-harmful for allergy sufferers. Power type: electric Installation / mobility: portable Other features: ceramic...

... Custom Assembly of Winding Rings The coil holders are produced in multiple parts. Machined discs with corresponding mounting grooves are precisely glued with suitable pipe sleeves. Wire feed-throughs can also be pre-machined. If multiple chambers are necessary, a different construction is required. Non-flammable (UL) Creepage resistant (CTI 600) Dielectric strength High-temperature resistant Highest thermal class Areas of Application/Uses Chokes, coils, air coils, transformers Soldering machines/soldering stations Insulation of wire resistors...

... manufacture and process your wire bridges from bare, tinned, silver-plated, coated, or insulated wires with PVC, PTFE, and silicone. We process wire sizes from 0.25 to 4.0 mm² with a stretched length starting from 19 mm. We also handle wire resistors and diodes for you.

...Wire bent parts and stamped parts according to your specifications and templates With a diameter ranging from 0.1 mm to 10.0 mm, • as wire bridges in U and snap-in designs. Starting from grid dimensions of 2.54; 5.08... etc. continuously. Leg lengths and wire diameters according to your requirements • as wire bent parts • as wire resistors bent Wire bent parts made from the following wires: • Beryllium • Copper • Brass • Nickel silver • Nickel • Titanium • Tin bronze • Spring steel wire • rust-resistant spring steel wire • Iron wire • coated wires • and much more - please inquire...

...CSN® Neutral Earthing Resistors are used in power distribution systems for star point earthing of transformer or generator windings. According to the application (low or high ohmic neutral earthing type) pakkages made out of meander shaped stainless steel wire elements or CSN® Resistor Webs will be used as active material. Schniewindt has already supplied units for system voltages up to 380 kV...

...Configurable thermocouple temperature probe. Made with rigid wire thermocouple. Semi-finished thermocouple, with tails for final assembly, with head, connector, or cable. Multiple options (wire diameter / length). Applications: - Steel industry - Chemical - Pharmaceutical - Foundries - General industry - OEM...

...Precision resistors are used wherever the highest standards of temperature stability, error tolerance and durability are required. Models 1164 and 1166 are available for higher loads up to 1 W. The resistors are supplied with two connections on the front end (suitable for mounting on circuit boards). The precision resistors comprise low-capacitance, low-inductance wire coils made of...

...Used, among other things, for test fields and laboratories; highly durable and self-ventilated; constant current value; available individually and with housing. Our tubular resistors consist of a ceramic tube as a winding carrier with round or flat wire as the winding, with the windings cemented with flat wire. The cement layer provides higher load capacity and mechanical strength.

...IST AG offers RTD platinum SMD sensors with contact pads on both ends for automatic PCB assembly processes. We provide various SMD technologies for different applications and temperature ranges, such as SAC305 tin-plated contact pads for standard PCB assembly, high-temperature solder contact pads for high-temperature applications up to 250°C, or Ni/Au contact pads for special requirements or wire...

... lead wire JAXA Qualification 2011 Surface mount type fuse JAXA Qualification 2013 Lead type thermistor JAXA Qualification 2016 Used for electronic equipment installed in satellites, space stations, rockets, transfer vehicles...

...This wire is particularly characterized by an electrical resistance within a very narrow range and is used for welding sleeves. Form parts with integrated resistance wire.

...Heating and cooling units are intended for plasticizing plastics. The housing is made of stainless steel. A resistance wire placed in ceramic shapes is used as the heating element. A fan is mounted to the cover.

...The armored resistors with threaded cap are produced using a resistive wire positioned in a stainless steel tube and insulated with compacted magnesium oxide (MgO). These products come in diameters of 6.5mm and 8.5mm and can be made according to customer specifications, in both single-phase and three-phase versions. The resistors are brazed onto a 1" ½ GAS AISI 304 cap with a corresponding gasket...

CRC Progetti Srl was founded near Brescia (Italy) in 1978 by Francesco Piva and is currently managed by his son Stefano Piva. At the operational headquarters in San Zeno (Brescia, Italy), we design and manufacture electric wire resistors, armored resistors, furnaces for heat treatment, fluid heating, metal annealing, melting ferrous and non-ferrous materials, and special applications. We produce ...

...ELECTRIC RESISTANCE WIRE ON A FRAME MADE OF SHEET METAL, COMPLETE WITH SAFETY THERMOSTATS AND CONNECTION CABLES.

... and angle values. Almost all series can be equipped with short-circuit paths, taps, and functional windings for measurement range adaptation. Some series feature a built-in signal converter with current or voltage output in two, three, or four-wire configurations. For measurement at locations exposed to extremely contaminated ambient atmospheres, potentiometers with oil filling are available.

...Radial high-ohm resistors, GST, resistance range: 1M ... 1T, tolerance range: 0.25 ... 30%, TC (ppm/K): 25/.../ 1000, Other characteristics: 0.3...6 kV...

...In Dutex s.r.l. Patelec produces customized wire harnesses, cords and cable assemblies with simple finishing as faston and housing, shrink tubing, clamps, inductors, resistors, or even complex assemblies.

...Air-cooled ceramic resistors use 80/20 1100ºC chrome-nickel wire, static belt material, and a stainless steel outer casing, similar to ceramic insulated resistors. In addition, they include a reflector for even air distribution, an imported high-flow single-phase fan, and an air outlet duct. These types of heaters can be manufactured in desired dimensions and specifications.

...Selection of probes based on Pt100/Pt1000, thermistors or thermocouples Platinum Temperature Sensor (Pt100/Pt1000) Platinum measuring resistors incorporate a Pt100 or Pt1000 sensor with 1/3 DIN accuracy. They are available in two-wire and also four-wire technique when power resistance needs to be compensated for. Platinum sensors can operate within the range of -50°C...+400°C while still...

... from the fields of vehicle construction, medical technology, energy and environmental technology, conveyor and lifting technology, and mechanical engineering have relied on for over 35 years. Our range of services: Resistors: Extensive selection of high-voltage and power resistors. Power resistors in thick-film technology or as wire resistors. Joysticks: Thumb, finger, and hand joysticks for...

... and metal hybrid packages, specialist adhesives and epoxies and thermal greases for the aerospace and electronics industry, CO2 cleaning systems, micro-abrasive systems for surface preparation cleaning and rework, soldering test systems and lead dipping soldering equipment, dispensing equipment and a range of die bonding tools, capillaries and wire bonding wedges. ...

... processes for the production of an electronic module from a single source: - Design service for ceramic, organic, and other substrates, such as thin film, DCB, etc. - Substrate manufacturing: LTCC, thick film - Assembly processes, such as SMT, flip chip, wire bonding, die attach, etc. on any base materials - Packaging processes for BGA, LGA, QFP, etc. - Special services, such as custom testing, project management, validation, global material procurement, etc.

SEFARD, with its 45 years of experience, manufactures all types of springs and wire parts from a diameter of 0.3 mm to 16 mm, in various shapes and sizes, from small batches to large-scale production (wires, strips, and springs) and offers you over 25,000 references.

Asturgó Electric Heaters is a manufacturer of electric resistors and electrical equipment for heating solids, gases, and liquids. Among our products are: circular electric heaters, rectangular finned electric heaters, rectangular open-wire electric heaters, armored electric resistors, finned electric resistors, immersion electric resistors, electric air heaters, electric hot air curtains, energy dissipation equipment, battery discharge equipment, flat and clamp resistors, heating cartridges, infrared radiation resistors, ceramic candles, de-icing resistors... and many more.