wind sensor

... foundation settlement.TYPICAL USE Off-shore wind turbine foundations Bridges and piers Historical buildings Structural load testing Vessel and pontoon roll and pitch measurement Crane roll and pitch measurement Structural Health Monitoring FEATURES Biaxial High accuracy and resolution Excellent thermal stability 4-20 mA current loops for signal immunity and potentially long cable runs Enhanced surge protection Internal temperature sensor for residual thermal drift compensation Two models for horizontal or vertical mounting Easy to install...

...The RRIWAN Anemometer INT10 measures the current wind speed and converts it contactlessly into a linear output signal. The sensor is designed to be storm- and weather-resistant. Thanks to its self-regulating heating, it can operate at temperatures as low as -40 degrees. The evaluation is carried out separately via a measuring device, a display instrument, or in the connected control and monitoring technology, e.g., in building technology.

...The device measures wind speed and wind direction and is powered by an integrated solar panel. It features a rechargeable lithium battery. Wind speed range: 1 – 40 m/s Wind speed resolution: 1 m/s Wind speed sensitivity: 0.13 m/s Wind direction range: 0 – 359° Wind direction resolution: 10° Wind direction sensitivity: +/- 1.5°...

... be applied and reapplied non-destructively to test surfaces to measure pressure, thanks to its reusable masked adhesive backing. It has accuracy comparable to that of pressure taps in subsonic flow, but with a fraction of the setup time and cost. With Aerostrip, you can quickly take non-destructive measurements of the external pressure on control surfaces, live or in a wind tunnel, allowing for faster and more efficient optimization of aerodynamic components.

...Compact rugged wind sensor with a maximum measuring range of 60m/s. - Analog and digital output for wind speed and wind direction - Optional measurements: relative humidity, temperature, pressure, solar radiation - Wind gust (SDI12 and Modbus) - SDI12/RS422/RS485/Modbus output for all parameters (define at ordering) The MultiMet is a rugged compact wind sensor that can be supplied in many...

... effects to repel dogs, cats, birds, and any pests The motion sensor automatically switches on when it detects an animal Reference:GI-157910 EAN:3574591579100 (L x l x H):25.00 cm x 11.00 cm x 9.00 cm Box Dimensions:74cm x 46cm x 43cm...

...The anemometers are used to measure and, in conjunction with the corresponding display, to monitor a maximum wind speed. They are primarily applied in safety and control systems for crane and excavator installations, wind power plants, and as components of weather stations. Two designs are available: one with pendulum alignment and one with the usual base or standpipe mounting. Due to their...

... make innovative design solutions possible in a range of industries including, consumer electronics, solar photovoltaic and wind energy, aerospace, automotive and industrial applications. Kapton® Tapes have a high dielectric strength. Silicon adhesive protection leaves no residue. Custom sizes are available upon request. Applications: Automotive sensor and manifolds Insulating circuit boards Etching Fiber Optics Cable High temperature powder coating Semiconductor manufacturing Wave soldering during circuit board...

...Interactive mini golf with many mechanical features and game modes. The «Putter» is equipped with a sensor that is your identifier. You must scan your putter in the terminal in front of each circuit to identify yourself and start play. The courses are equipped with a multitude of features to make the experience more interactive and varied. (Culture questions, wind tunnel, pinball,...) Propose to your customers an original activity with an extra large players capacity. Space needed:Min. 300m² Players:1-72...

...The sensor system is designed for use, for example, in wind turbines to measure and assess vibrations in the tower head. It measures dynamic accelerations using MEMS sensors with subsequent digitization by a controller. The device consists of an acceleration sensor, a control unit, and three types of output interfaces. Two safety switching contacts (potential-free) are the main feature, which can...

ECLATS ANTIVOLS is the leading distributor of electronic equipment in France for over 40 years. It showcases its expertise to ensure flawless security for its clients. All the equipment offered is manufactured in France and Europe, adhering to reliability standards. The company offers a wide range of products, including Auto-Moto Accessories, Home Alarms, Power Supplies and Chargers, Opening Auto...

... The company then becomes your preferred partner throughout all stages of your project: from design to installation. Find examples of our projects on our website: - deformation sensor for the maintenance and monitoring of wind turbines - deformation sensor for an airport runway - sugar content sensor for melons - sensor for monitoring geological CO2 storage - sensor for monitoring a pedestrian bridge - temperature sensor for Airbus...

For over 70 years, Thies Clima has been developing and producing precise sensors, measurement, and evaluation systems for global meteorological and climatological measurement tasks. From the very beginning, our company has embraced the latest technologies and developed and implemented state-of-the-art techniques. The Göttingen location has proven to be optimal for this purpose. Close collaboratio...

Manufacturing and distribution of sensors & measurement technology, accelerometers (IEPE, piezoresistive and capacitive), force transducers, pressure transducers, displacement transducers (cable pull transducers or linear potentiometers, LVDT, LASER, eddy current), inclination sensors, inclinometers, torque transducers, modal hammers, impact hammers, DMS simulators, calibrators, vibration exciters...

...Wind vane with 4-20 mA output. With 20 meters of cable. Magnetic sensor. Maintenance-free. WARNING: This sensor requires a minimum wind speed of 3 km/h to achieve good accuracy. Below this value, the information should not be considered. SKU: 17382 Output: 4-20 mA, 2 wires Power supply voltage: 12 to 30 Vdc Accuracy: +/- 3° Maximum wind speed: 200 km/h Minimum wind speed: 3 km/h Additional information: CUSTOM MADE, REQUEST ADVICE...

...The Ambientika Wireless+ is a single-room ventilator from the South Tyrolean company Südwind. The integrated sensor technology in the form of light and humidity sensors enables fully automatic operation. With the help of a remote control, all configurations and program settings can be managed. Additionally, you benefit from easy installation and configuration of the device, as well as a quiet yet...

... are available right away. A complex evaluation of the raw data is therefore not necessary, but of course, it is stored for documentation purposes. Additionally, boundary conditions such as temperature, wind speed, etc., are automatically logged. Overall, the Digitalker III consists of hardware for capturing and preprocessing sensor signals, as well as a PC program for configuration, data storage, and control of the testing processes. Wheel circumference: 500 mm...

... has been designed to complement the Kunak AIR solutions and can measure up to 2 gases and particles. Additionally, probes for wind, rain, noise, etc., can be connected to the device to meet all the requirements of your air quality project. This industrial air quality solution has been developed for harsh environments and allows for easy integration of real-time data into wired industrial systems...

... anthracite. It is important to mention that the technical parts of the awnings are additionally protected by plastic covers, so dust does not accumulate and insects and arachnids are prevented from settling. Awnings can be conveniently controlled manually or automatically. A wide range of accessories is offered (the engine with emergency opening, the remote control, the wind sensor), which makes these solar control mechanisms even smarter and more comfortable.

...This ESR strain sensor allows for the measurement of deformations on mechanical structures and enhances the monitoring of industrial production structures such as bridges, cranes, and wind turbines (Leine&Linde being particularly specialized in this application area) and in the steel industry. The principle of the ESR strain sensor is based on measuring the elongation of an internal sensitive...

...Weather sensors ensure that irrigation is temporarily suspended due to natural precipitation, wind, or frost. Soil moisture sensors stop irrigation when the set moisture level has been reached. The Solar Sync® weather sensor automatically adjusts the irrigation duration based on current weather conditions. With the help of a flow sensor, flow rates can be monitored. The sensors are designed to optimize irrigation in such a way that, on one hand, water can be saved, and on the other hand, to protect green areas and plants from overwatering and the potential damage that may result.

... encoders are leading in the US on the field of fan adjustment on wind power plants . The optical incremental encoders are designed with an unbreakable disc as well as a wide-gap technology (the air gap between sensor and disc is 8 times higher) – thus they are insensitive to shock and vibration . The magnetic encoders distinguish by insensitiveness to water, condensation, oil and extreme dirt. All encoders have a solidly designed bearing to guarantee a long operating time even under extreme conditions . Severe Duty Magnetic Encoder 3/4"-1 1/8" [19-30mm]Hollow Shaft Mount...

... Relative Humidity Probe and base 15 ... 90 % R.H. Liquid Resistance Probe and Base Lubricating oil, light oil, or 5% saline solution Ingress Protection Probe Water, oil, and dust, according to protection class IP67 Base Rain with wind (the battery compartment must be closed). Do not submerge in water...

...The Wind/Rain Sensor WRG 82 can detect six different wind strengths, adjustable beyond rain monitoring. - Rain signal is stored for approximately 2 minutes (rain hold time) - Wind switching threshold adjustable via DIP switch to 4 or 6 Bft. - Wind signal storage time is about 10 minutes - In conjunction with WE 516, WME 43, or WRZ 8000, continuous adjustment of the wind switching threshold...

...• Wind, solar, or hybrid (wind-photovoltaic) power supply • Ready-to-install system, operational immediately • Depending on the desired lighting quality and the battery's output power, 3 programmable modes: ◦ "standby or marking" mode ◦ "continuous lighting" mode ◦ "motion sensor lighting" mode (30% extended lighting time) • LED lighting • Advanced electronic management for turning on and off...

...This module allows you to have a fully integrated weather station for your COSMI product. You will be able to display the wind speed as well as its direction. There is also a temperature sensor, humidity sensor, light sensor, and a noise sensor. SKU: 2904208...

... / max. 800 mA; the heating in the sensor head prevents the moving parts from jamming under most climatic conditions Starting value < 0.5 m/s Housing: seawater-resistant aluminum, IP 65 in vertical operating position, M12 cable connector, stainless steel nut and lock washer including 15m cable Weight: 0.350 kg...

... the air guide device or the swing of the air guide leaf. Tap Hand Dryer:Wash Hand Dryer Automatic Sensor:Hand Hygiene model:JXG-230 APPROVAL:CE/GS MATERIAL:IRON POWER SUPPLY:2100W MOTOR POWER:150W MOTOR RATE:5000rmp WIND SPEED:>20M/S AIR TEMPERATURE:65±15°C PROTECT TIME:1min SENSOR short:50 mm to 200 mm PACKING:4PCS/CTN The PRODUCT DIMENTION:265x245x207mm G. / man:10.5/9.8KGS MEAS:55.4x30x49.3cm QTY OF 20:1400PCS 40FT:2796PCS...

... the comfort of indoor spaces, and reduce the use of air conditioning systems, available in both cassette and non-cassette versions; Tensioned awnings, ideal for covering verandas, skylights, and pergolas, equipped with motorized control and a sensor that detects sunlight and wind intensity to intelligently adjust the opening, protecting the awning even when you are away.

...SUN SHADE CONTROL VIA APP FOR ALL SAIL SIZES UP TO 80M² Our fully automatic sun sails not only provide high operational comfort but also a variety of design forms and applications. Using a remote control, the sun sail can be adjusted continuously in size and position. A sun, wind, and rain sensor also ensures safe operation depending on the prevailing weather conditions.