temperature control system

... temperature measurement. This allows for a maximum of 96 temperature circuits to be monitored using the vtc 4-way distribution system. In conjunction with the standard continuous heating control, a highly energy-efficient and homogeneous temperature profile is achieved at the surface of the mold nest, as well as with continuous cooling using a motor valve. The pumps can optionally be operated with...

... stabilize the fluid's temperature after reaching the desired level. This requires integration with a source of chilled water: a simple well or a cooling system (chiller or dry cooler). Our engineers are available to determine the most effective and economical cooling solution. Not only that. Managing these subsequent heating-cooling phases is simpler when done with a touch screen: a feature that the FTT DC temperature controllers are equipped with.

... parameters in the system chamber temperature, humidity, core temperatures and much more are permanently recorded and made available as graphic evaluation for quality control. Simple operation:intuitive, well-structured and ergonomic program control...

...The right temperature is crucial for the optimal processing properties of the ZZ fire protection foam 2K NE. To achieve this, the WAECO 21FL temperature control box is recommended.

... feature. Unistat technology impresses as a result of economic operation with reduced operating costs and efficient energy management. Because Unistats are hydraulically sealed, the service life of... Temperature range:-85...250 °C Temperature stability:±0,01 °C Temperature control:TAC, self-optimizing (True Adaptive Control) Display resolution:0,01 °C Alarm message:optical, acoustical...

...Klöpper Therm designs and manufactures specified switch and control cabinets in various designs – for nearly all types of electric surface heating. By the installation of electronic controllers, heating systems can be controlled in dependence of temperature and/or humidity. Arising disruptions during the control of temperature measuring sensors such as e.g. a falling below temperature, can be...

... The Innolog™ and Innocheck™ products, designed by Kelvin Solutions, are indispensable tools for monitoring the temperature of food products throughout the cold chain and can be integrated into the HACCP self-control system.

... data into meaningful information that can be used to understand, control and optimize your cure process. Complex calculations are simplified, allowing quick and comprehensive analysis. Detailed information of your oven gives you the reporting power you need in a detailed, certified and traceable profile report at the click of a button.Routine oven profiling has never been quicker, easier or more efficient. Send the Datapaq XL2 system through the oven and discover the true potential of your finishing operation. Simply 'plug & go' Easy data download from the MemoryPaq...

...Thermostatic valves - i.e. the temperature controls on the heating system - are found in just about every home. In the head of a thermostatic valve there is a metal bellows, a corrugated tube that expands according to the room air temperature. For these metal bellows, the manufacturer needed deep-drawn, very long and thin-walled sleeves. The challenge: the sleeves must be matched to the...

...End-of-Line (EoL) testing devices are used to test the quality of the product after the production process. The purpose of the testing system is to check any visual, audio or other problems that may arise during the installation and assembly of components before they are delivered to customers. Application examples of end-of-line testing systems developed by Novosim include: ​ Rotary systems...

...Besides the production for our customers there are Data Matrix Code laser engravers, online production control and support system (OEEm) for full traceability, robotized high pressure washing equipment, tightness Quality CMM machines, assembly and logistic services. We have Accretech Surfcom Nex100 surface roughness and contour measuring machine Ecologic high pressure residual contamination tester. We have centralised chips and emulsion management, temperature and filtered air control, 7/24 shift pattern. Reference:Serial Machining Business Unit...

...Mercury emission monitoring by sorbent traps is a good and practical alternative to conventional Hg CEMS. Measuring range: (total mercury) :0.01 – 1000μg/m3 Sampling period::from 15 minutes up to 4 weeks Flue gas temperature::< 200˚C with heated probe; > 200˚C on request Max. dust concentration in flue gas::20 mg/m3 Operating temperature::+5 to +40˚C (optional with air conditioner: -20 to + 55˚C)...

... Scheuch COMPONENTS, we develop and manufacture swing gates in all dimensions. The largest gates produced in our company measured 622 x 622 mm. Regardless of their size, all Scheuch COMPONENTS industrial gates are characterized by their high quality in design and production. Our swing gates withstand thermal loads of up to 250 °C when sluicing goods in and out of pressure differential spaces, such as those found in filter systems. Max. Temperature: 250 °C...

... nozzles. - When opening the compact safety filling screw with the included hex key, excess pressure is released through the recess integrated into the screw. Technical Data: Suitable for a variety of liquids - Fluid Group 1 Max. 6 bar container overpressure allowed Standard design 1 bar (safety valve) Valve voltage 24 VDC, 230 VAC available on request Valves with manual override Seal materials highly resistant Permissible temperature: -10 to +50 °C Volume: 500, 1000, and 2000 ml Optional with float switch...

...The new Kuhnke Vico 04 series is a powerful display unit with an industrial design and enables modern operating concepts. The installed CODESYS PLC software package offers the possibility to use control functions in addition to visualisation. The visualisation is developed together with the PLC application in the free CODESYS Development System. The device communicates with the external fieldbus...

...12-channel resistance heating system 84 KVA very compact design dimensions 107 (93) x 120 (96) x 57 cm Pri. 400/500 V sec. 12 x 17 / 30 / 42 / 65 Volt 100 A 12 Thermocomputers WGSTAR for individual control loops User-friendly control panel front, protected by Plexiglas doors including temperature recorders 2 pcs. 6 colors type AL 606 (optional with our LogOnline system remote inquiry via the Internet) Optical and acoustic alarm function (optional with welding signal light and/or SMS alarm)...

...Herefore, changing a filter cartridge or doing any other service work on the system is quick and easy! As raw and fitting material ASCO uses mainly stainless steel. This makes the system very resistant and extends the products life cycle. easy to install very accurate 4 20 mA output signal robust stainless steel construction no auxiliary equipment like air compressor needed, only power supply is required Humidity:34 % to 99 % Uniform building code:seismic zone 2A Temperature treated water:15 to 35 ° C Side stream water pressure:4 bar (58 psi) max.

...Hot Runner System - Temperature Control Device DPT6 - DPT24 The temperature control devices of the DPT series feature extensive functions for the safe regulation of complex hot runner systems.

...• Heats up the compressed air up to 100 °C (212 °F) • Total avoidance of condensation • Simple and accurate temperature control • Easy to fix on control unit • Also suitable for dry ice blasting machines with CO2 pellets • For the cleaning of switch cabinets, thin metal sheets, electronic components...

... is not only extremely compact and easy to use but also ensures an accurate control of water temperature. MCHILL Series is used for Food & Beverage Industries, Wineries, Dairies, Breweries, Bottling, Storage, Plastic Industries-Injection, Extrusion, Blow Molding, thermoforming, Laser Industry-Cutting, Welding, Profiling, Optics, Medical; Chemical & Pharmaceutical Industry-Natural Gas, Jacketed Vessels, Polyurethane, Laboratories, Healthcare, Petrochemical, Temperature Control; Engineering Industry-Machine ...

...Compact monoblock unit for a straddle-type installation. A flexible solution is suitable for several applications in small cold rooms and at different temperature ranges. Compact design particularly suitable for installation in small spaces. Easy mounting for a very quick installation. Electronic control instrument arranged to manage the completely refrigerating system; compact, for easy and...

...FP1600 - Modular Control System with ProfiNet...

...The controller consists of a switch head and a closed hydraulic system with a liquid sensor. The sensor must be in direct contact with the monitored medium. The temperature-dependent volume change of the liquid triggers the electrical switch. As temperatures rise, the switch opens its contact upon reaching the set temperature and automatically closes the circuit again after cooling down. Areas of application: flat convectors, hot water boilers, mini ovens, fryers, grills, etc.

...3 points; (0)2-10V; (0)4-20mA Accessories Electronic positioning system, limit switch, position feedback signal. All electrical regulations are also available with safety position. Size::DN 15 - DN 50 Pressure::PN 40 Material::Stainless steel 1.4408 Temperature::-30 °C - 200°C Connections:: Whitworth thread; NPT thread Application::Gas, vapors, liquids Degree of protection::IP67...

...Type K thermocouple temperature probe, configurable. Preferably made with a sheathed thermocouple. Suitable for all types of applications, as its low cost, multiple options (length and type of cable / length of the bulb), and easy installation make it one of the most widely used models on the market. Thermocouples type J / K / N / E / T manufactured according to DIN EN 60584, for a temperature...

... a base unit and then automatically uploaded to cloud storage or saved at a specific location. The RTR-576-S is suitable for CO2 measurement and management in rooms and buildings, both in close proximity and at a distance. This model is equipped with a high-precision temperature and humidity sensor, making it ideal for situations where accurate temperature and humidity control is required. CO2 Concentration: 0 to 9999 ppm Temperature Range: -25 to 70°C Humidity Range: 0 to 99% RH...

...Optimizes finishing The Orthopac VMC is a modular process control system for textile refinement. It optimises drying or fixing processes as well as the processes all about the stenter. The system measures, logs and controls critical process parameters over the entire working width like temperature, dwell time, residual moisture, exhaust air moisture, thread density, basis weight and more. This...

...The Raytek MI3 is a two-part temperature measurement system, consisting of a miniature infrared sensor head and separate communication electronics. The OEM version allows for direct connection to existing control systems via the internal digital bus. The communication box enables the connection of up to eight individually addressable sensor heads. This reduces acquisition costs, simplifies...

... operating conditions were the focus, MicroControl has created the µMIC solution – an answer to everything users need in practice. Programming: Node-RED, CC/++ Temperature Range: -40 .. +50 °C Supply Voltage: 9 ... 36 V DC Housing: Metal Operating System: Linux Interfaces: 2 x Ethernet, 2 x CAN, 2 x LAN, 2 x RS232, 8 x digital I/O, microSD, USB,...

... (depending on the expansion volume) Impulse intensifier for small volumes up to 2,000bar Safety test chamber with automatic door Media treatment with dirt and clean tank Temperature range:-55° to +160°C (without Climate Chamber) Average rate of temperature change according to IEC 60068-3-5:Heating ca. 2,5 K/min | Cooling ca. 2,5 K/min Rate of temperature change (linear) Rate of linear temperature change with test material 230 kg alum:Heating ca. 1,5 K/min Cooling ca. 1,5 K/min Linear between -20°C…+135°C...