plate and bar exchangers

...Heat exchanger for high-temperature heating networks Primary side design: - U-shaped plate bundle made of 2mm thick stainless steel - Self-resistant pressure circuit - Pressure up to 32 bar - Temperature up to 200°C Secondary side: - Circulation in the shell and through the plates - Easy opening possible with primary under pressure - Integrated mud pot at the bottom with drain connection - Pressure up to 10 bar - Temperature up to 110°C Excellent thermal performance due to the crossing of primary/secondary temperatures Very low primary return Compact, robust, and self-dilatable exchanger...

...Für den Inhalt dieser Seite ist eine neuere Version von Adobe Flash Player erforderlich. UNEX brazed plate heat-exchangers are made of high quality, pressed stainless steel plates. These high-grade steel plates are hard-soldered by means of pure copper / lead flux using the vacuum method to produce a compact unit. Hard-soldered heat-exchangers are pressure vessels. In order to meet the safety...

...Plate heat exchangers consist of a number of corrugated plates. The plate pack is mounted between a fixed and movable pressure plate, positioned by an upper and lower carrying bar, and compressed by several tightening bolts. The media involved in the heat exchange process are fed into the plate pack via connections on the fixed and movable pressure plates. The arrangement of the plates creates...

...Brazed plate heat exchangers designed to meet multiple applications in heating and cooling of various fluids, including refrigeration applications. temperature: from -50°C to 195°C pressure: from 0 to 30 bar transfer area: up to 75 m2...

...The soldered heat exchanger is an advancement of the bolted heat exchanger. It consists of two end plates, a number of specially pressed plates, and four connections. All parts are soldered in an oven at 1100 °C. The vacuum soldering of the contact points results in a compact and pressure-resistant heat exchanger. Flow rate: 1-300 m3/h Operating pressure: Up to 31 bar Connections: ½"-DN 150 Operating temperature: -195 to 230°C Recommended max. temperature difference: Up to 80°C Plate material: 1.4401 (AISI 316L) Solder material: 99.9% copper...

...ETS plate heat exchangers can be used practically everywhere, provided there are no large pressure differences between the media. Soldered plate heat exchangers have no seals and can be used in a temperature range from -180°C to +200°C at a maximum operating pressure of 25 bar. The high turbulence ensures excellent heat transfer with minimal space requirements. They are used as heat exchangers for liquid media in industry and building services, as well as condensers and evaporators in refrigeration systems.

... 40 bar g), hydrocarbons, seawater, effluents, and brine. With a wide range of auxiliary support equipment, we can connect our system to any design with minimal disruption to the installation. Rental of removable plate heat exchangers for all types of applications We offer a wide range of plate heat exchangers, shell and plate exchangers, multi-tube exchangers, and air coolers. They are thoroughly cleaned and pressure tested before each use, and come with a waste disposal certificate.

...Soldered stainless steel plate heat exchangers, operating pressure up to 45 bar. Copper or nickel solder. Approvals ASME, SVGW. Optional: U-Type, double-walled, 3-circuit, internal threads, standing bolts, insulation.

... and 5 mm foil cover in RAL 9006 Silver, removable Operating pressure: max. 3 bar Test pressure: max. 6 bar Temperature: max. 110°C Equipment: 2 smooth tube heat exchangers for solar with 1 inch female thread, return layer pipe for temperature-dependent layering of the heating return, stratification separator plate and stratification loading device, (sensor strip under zipper from 600 liters...

...allows for controlling the fluid circulation speed (chilled, cold, or hot water) regardless of the number of exchangers required in the system. The pressure drops have been calculated to allow sufficient time for the fluid to effectively transfer calories or refrigeration, thus enabling a rational and efficient thermal exchange tailored to the needs. Reference: B3708 Water circulation pressure: 4.0 BAR Burst pressure: 12.0 BAR...

... capable of working with a wide range of process media. In the past, we have successfully designed devices with the following process media: water, steam, vapors, beer, alcohols, air, exhaust gases, oils (edible oils, thermal oils, lubricating oils). The maximum sizes of the products reach up to 4,000 mm in diameter, 30m in length, 100t in total weight, and up to 550 bar operating pressure. Through...

Our company has been based in Gelsenkirchen for over 30 years. Since then, we have been manufacturing fully welded plate heat exchangers for the chemical industry and plant engineering. In close collaboration with our customers, we develop thermal plate heat exchangers for a wide range of requirements: • Corrosion resistance or maximum performance and compactness, • lowest pressure drop or safe...