process filters

... filters while the unused powder particles are held by filters. The filters are automatically and periodically pumped air in reverse direction to direct the powder paint that held by filters to the sieve tanks which is under the cabinet for reusing. As a result of this process, the unused powder paint is recycled. Polyester-Teflon and Sinter-Lamellar type filters are used in our booths. Polyester-Teflon filters are preferred due to their low cost and Sinter-Lamellar filters are preferred due to their long filter life. Both types offer efficiency with recycling systems, economical solution...

... of High Pressure 50Bar Desiccant Air Dryers Standard Accessories: It has electronic control feature. Long-life pneumatic valves of European origin Superior performance active alumina American and Japanese made exhaust air silencers Inlet and outlet air filters Zero air loss water discharge system at the entrance Optional accessories: Dewpoint sensor and Energy saving mode Maximum Working Pressure: 50Bar-300Bar varies depending on the models. Regeneration air loss rates: -40 Dewpoint: 2.7% -70 Dewpoint: 5.4% Our High Pressure Desiccant air dryer models have a 2% air loss rate.

...CSN® PreInsertion Resistors are used for limitation of transients during energisation process of transformers and HVDC VSC converter applications. CSN® Discharge Resistors are used for discharge of Capacitors, reactors and superconducting magnetic field coils. They are characterized by a high dielectric strength and energy absorption capacity. CSN® PreInsertion or Discharge Resistors are designed and manufactured individually to customer requirements and specific application. ...

...GUTSCHE High Performance Filter media are available as rolls or cut-to-length material, as well as ready-made filter bags. The common design variations from all major equipment manufacturers and filter types are constantly available from stock. Upon request, we can also quickly implement custom designs and specially tailored solutions for specific requirements. In this process, GUTSCHE customers benefit from our extensive experience with a wide range of applications.

...The occurrence of smoke generation in the workplace is a normal process, especially in metalworking companies or in the automotive industry.

...APODIS filter bags are excellent for retaining higher concentrations of particles due to their high dirt absorption capacity. In the field of coolant and oil filtration, we offer our customers specialized 3D filter bags (PPE and PPX). These are precisely designed to meet the high demands of machining, provide maximum process reliability, and can also be delivered in a service life-optimized variant.

...Melt pump for the production of medical nonwoven fabric. Melt pumps of this type are used, among other things, in the production of medical nonwovens, such as those used in respiratory masks. The nonwoven fabric produced using the melt-blown process can be used in various applications, including protective masks or filters. The EXTRU series is precisely tailored to the requirements of the melt-blown process and operates with the highest precision. Medium: Polymer melt, adhesive Actuation: with electric motor Start-up: self-priming Technology: external gear Application area: extrusion...

...Finest quality surface polishing is vital in plane optic production. At Befort, this has top priority from production all the way to final inspection. Thanks to sophisticated CNC technology, we are able to produce single planeoptic components as well as multifunctional systems. We process optical glass, filter glass, quartz glass and float glass up to a size of 600 mm diameter. We make filters...

... advisable to work in an environment with a temperature of at least 25 ° C, a temperature to be maintained throughout the hardening period. The completely hardened product can be polished like normal lacquers paying attention to the residual elasticity, during the polishing process it is necessary to avoid overheating the surface to avoid temporary softening. Otherwise, you can proceed with the...

... - Individually equipped with micro annular gear pump, filters, sensors (e.g. flow, pressure, temperature), valves, fluid connections - Chemical resistant materials - Material combinations from stainless steel / hard... Pumps: Micro annular gear pumps of hermetic inert and high performance series for volume flows from 0.003 t Filter: Filters in stainless steel, alloy C22, PTFE or glass * Mass flow...

... it is also an important source of energy with enormous potential if used sensibly. Up to a content level of approximately 40% methane, landfill gas may still be recovered usefully in modern block heating plants. The important factor in this case is an effective and project-specific pre-cleaning process for the gas. We can help by providing you various gas cleaning systems, gas drying systems, and activated carbon filters, and pressure increasing stations. The components may be used as individual models or delivered as a complete system that is built into a container. Landfill gas...

... Application Examples: - Flow measurement in all industrial sectors, in municipal utilities and authorities, in research and development - Measurement of gas mass flow - Flow measurement in air and exhaust air, process gases, in exhaust gases loaded with particles and condensate, vehicle exhausts, aggressive gases at high operating temperatures - Measurement in transport air containing cement, coal, or toner - Measurement at filters and fans...

...Filtration Services can provide filter spares and consumable items for all of our filtration equipment. We can also provide replacement parts for most other filters used in the chemical and process industries and redesign a wide range of replacement components for old or obsolete filters using our in-house design facility.

... prototypes, small or large series – we guarantee you the utmost care in the development and manufacturing of your products. We can flexibly respond to the most diverse geometries, diameters, and materials at any time. Manufacturing area of spherical optics: • precise processing of spherical surfaces • Lenses with diameters of 6 - 120 mm • Radii from 10 mm - ∞ • CNC-controlled milling, polishing, and centering machines • Tolerance: 1 ring • Cleanliness: Scratch-Dig 20-10 • Tilt angle error: 1 arcmin Manufacturing area of planar optics: • e.g., filters, camera mirrors, prisms • excellent...

...Any type of Filter press or Centrifuge to treat your process.

...motors, and valves. The manufacturing process of hydraulic stations involves several key steps: Design and Engineering: The process begins with the design and engineering of the hydraulic station. This includes specifying the required flow rate, pressure, and functionality based on the application's needs. Engineers create detailed schematics and plans for the hydraulic station. Component Selection: Manufacturers carefully select hydraulic components such as pumps, motors, reservoirs, valves, filters, and hoses based on the system's specifications. The chosen components should be durable.

... form in the oil, from your oil system. Benefits for you: • Highest oil and fluid purity o Permanently reduce MPC value to < 10 o Simultaneously remove particles and water o Filtration in bypass mode (24/7) o Fine and microfiltration (3 µm absolute, < 1 µm nominal) • Long filter service life o High retention capacities due to depth filters o 120-150 m² filter surface area per gram o Excellent dirt-to-kilogram ratio • Filter material made from 100% natural fibers – 0% metals, 0% plastics • Low energy consumption • Easy installation and operation • Low maintenance...

...The filter fleece used in the filtration systems is the most important influencing factor for overall functionality. The filter fleece can affect the following factors: - Service life of the system components (e.g., pumps, spindles, etc.) - Process reliability (e.g., prevention of nozzle blockages, or concentration increases, container deposits, relief of downstream filters, etc.) For different...

... for accurate reproduction of test conditions. The Atlas SolarConstant luminaire offers high irradiance efficiency and superior spatial uniformity on the test area. Combined with special Metal Halide Global (MHG) lamps and optical filters, the SolarConstant creates a spectral distribution that closely matches natural sunlight. Its proven modular design makes this unit ideal for large custom-designed...

...Layer filters for total clarification/filtration of solids from process liquids/aqueous media They are used for the filtration of cooling lubricants and all water-like liquids, such as those used in the machining of hard metals. A layer filter of type SF is capable of achieving total clarification of the liquid. Especially in the area of fine filtration below 5 µm particle size, conventional...

... quantities. These include feed screws (for non-abrasive and crumbly products), cold crushers, and dosing screws. The dried end product is separated from the air stream using bag filters or cyclones. To improve product yield or minimize dust emissions, two-stage solutions are also possible (e.g., cyclones with wet separators). Areas of application: • Native and modified starch (wheat, corn, potato, tapioca) • Flour • Pigments • Carbon • Fly ash...

... transport, and also very cost-effective. The practical advantages of LUTENA-BagStar: ready to use for vacuum conveying, mobile and easy to transport, all connections and components pre-assembled, customizable configurations, low costs. Freely configurable according to customer requirements. In addition to the standard model, all conceivable modifications are possible. These include size, load capacity, safety and hygiene regulations, as well as existing process conditions. In any case, you will receive a complete system that is ready for immediate use.

...Inserts made of reticulated PUR ether foam for the filtration of wastewater in small filter systems or septic tanks. Combination filters made from foams with different cell sizes are also used. Filter foams are usually offered as reticulated, but can also be supplied as non-reticulated. Reticulation is a physical process that increases the open-cell structure and thus the permeability of foams. Cost-effective and precisely cut or punched, alternatively also water jet or die-cut. Foams with different cell sizes can be bonded with open and water-permeable filter fleece.

...Do not moisturize your skin with cream or oil before application. 2 - During the application of the tan: Apply a sufficient amount of mousse onto the mitt. Apply to the body areas in a circular and swift motion. Rub until the product is fully absorbed. Repeat the process for all areas.

...Colloide‘s Dynamic Sand Filter offers an excellent treatment system for the removal of solids and other contaminants from a water/wastewater stream. This filter is always on line, continually filtering the incoming water while continually backwashing a small portion of the sand bed. The Dynamic Sand Filter process: The feed water is fed into the filter at the base of the active sand bed...

... pressure reactors, allowing for an easy operation. The filter vessel is jacketed and can be temperature controlled by a circulator. Process connections are standard Tri-Clamp configuration. Pressure vessel:5 to 20 liter Pressure:-1 (FV) to 60 bar Temperature:-10 °C to +200 °C...

... electronic process protection safeguards pumps and systems against overload, clogged filters, dry running, and overheating. In critical situations, it shuts down the pumps before any damage can occur. At the same time, the module checks the target flow rate. This prevents lengthy and costly downtimes.

... lubricants, as well as oil lubricants, which are frequently used in chip removal machining and in the non-cutting forming of metals, and are highly filtered with this design. The unique market filter technology "Hydro" ensures a problem-free drainage of the separated aerosols, and our comprehensive and flexible product range guarantees you the appropriate extraction and filtration solution for every process. Hydro filters are self-draining, meaning that the collected oils or aerosols condense in the filter medium and...

... less. Extend tool life by an average of 27%, improve surface finish and prolong coolant life with PRAB’s line of paper bed filters. Standard paper bed filtration systems are available with flow rates up to 130 gpm with different classes of filter fabric allowing for adjustments of micron clarity. The disposable filter rolls are suitable for applications of low to medium stock removal of ferrous and non-ferrous metals, as well as organic and inorganic contaminants, such as glass, rubber and plastic. Drum-type models occupy one-third the floor space and can process up to 500 gpm of fluids...

... during manufacturing, we optimize the effectiveness of the separators. The consistently high manufacturing level allows us to achieve the best possible results, for example, in demisters, droplet separators, and impact separators. Examples: - Knitted packs or winding modules with or without casing - Impact protection filters - Droplet separators for liquid separation in the chemical industry Our modular construction program allows the use of the same standard components, for instance, in combination filters. This enables us to respond quickly and flexibly to individual requests.