load grippers

... Setup times ❌ Maintenance costs ❌ Personnel deployment ❌ Process complexity Possible applications of the FH-R15 ✅ Industrial robot applications for components up to 8 kg ✅ Loading and unloading of machines (e.g., press shops and body construction) ✅ Parts transport (e.g., large sheet metal parts like fenders or hoods) ✅ Transport of sensitive parts ✅ Use in systems with high component variability ✅ Use with collaborative robots Weight: 3.9 kg Load capacity: 80 N Gripping surface Ø: 150 mm...

... 45 k - No installation required when combined with the mobile plate - Loads can be picked up horizontally and vertically and rotated freely - A wide selection of different vacuum grippers - Integrated quick-change set for easy swapping of gripping tools Typical applications include handling boxes, bags, plates, barrels, furniture, and more.

... outdoor conditions, extension arms and grippers have to be reliably supplied with energy and data in order to carry our their lifting operations without any disturbances. With our carbon brush components we support you as system suppliers, finding ‘your’ solution, no matter where you are in the development process. Design, manufacturing, tool making and assembly – all from a single provider. And done in-house. Applications in crane technology Our solutions Our services...

...The rubber coating of these pot magnets protects delicate surfaces from scratches and additionally increases the load capacity in shear direction.

... 0.5mm), making them particularly suitable for use in automatic and semi-automatic feeding systems as well as for use as stop devices for robotic grippers. PNEUMAG is an alternative to vacuum transport systems. They have been tested on an St37 sheet metal plate with a smooth, clean surface. Please note that depending on the application, a safety factor of 2 or 3 must be taken into account. PNEUMAG is available in rubberized and bare versions. The rubber sole is designed to prevent slipping of the load.

... number is included in the test certificate along with the maintenance and warranty booklet. CrosbyIP clamps are individually tested with double the working load limit. Additionally, each clamp is equipped with an RFID chip that facilitates inspection. Working load limit: 0.5-30t...

...Load capacity: 750 - 9,000 kg...

... support you in this area and study every project related to automation from A to Z. When relevant, we integrate robots into our equipment and develop their tooling and operating programs. - Determination of robot (reach, load, environmental constraints) - Determination or design of custom grippers - Programming - Optimization - Commissioning Contact us to share your needs.

... grippers is the intrinsically safe spindle system, which makes the use of additional safety systems unnecessary. nationwide, factory-owned service Working under the lifted vehicle is also permitted during lifting and lowering operations. This is an advantage that our customers appreciate, for example, when installing and removing components, as the vehicle lifting height can be adjusted with millimeter precision while maintaining direct visual contact with the work area.

We design and manufacture load handling devices of all kinds. We specialize in fulfilling the individual wishes of our customers. This often results in unique pieces that are tailored precisely to the needs of our clients. The number of small series, on the other hand, is rather low. In addition, we are an engineering office for conveyor technology, lifting technology, and special constructions i...

...Lifting clamps are ideally suited for lifting, turning, and transporting steel and sheets. There are different types of lifting clamps for vertical and horizontal transport of sheets, automatically or manually closing clamps, as well as clamps for lifting, turning, and rotating sheets. Lifting clamps hold the load between the clamping parts due to a kinematic mechanism inside the clamp. Here...

...Lifting clamps for the safe transport of sheets and steel plates up to a maximum of 15,000 kg. All lifting clamps come with a valid factory test certificate and are of excellent quality. Various designs are available for selection. Load capacity: 750 kg - 15,000 kg Jaw width: 0 - 75 mm...

... retooling and reduces processing times compared to rigid pendulum supports that require manual realignment. The new pendulum supports offer high load capacity in a compact size. A built-in O-ring prevents the ingress of dirt and foreign particles. The pendulum supports automatically tilt back, for example, in the (post-) processing of cast parts, as these often have angled shapes. They are also suitable as an intermediary between automatic grippers and workpieces.

...2 rows of clamps for loading tree trunks. The surface coating is a 230 m thick powder coating that has been baked at 180 °C RAL 3000. RAL 3000 color, red. Shackles with a load capacity of up to 2 T. Opening width: 93 cm. Dimensions (LxHxB): 250 x 210 x 850 mm. Weight: 22 kg. Reference: DS355 Opening width: 93 cm Dimensions: (LxHxB) 250 x 210 x 850 mm Weight: 22 kg...

...Suspension with chassis on rail systems. Customizable grippers. Play-free, wobble-free lift, highly loadable, even with off-center loads, infinitely adjustable lifting speed, load capacity up to 1000 kg. Individual load capacities and lifting heights available.

...We manufacture for you: - Hooks - Beams - Grippers - Forks...

... scaffolding, fixed ladders + climbing systems Personal protective equipment against falls: harnesses, connectors, helmets, fall protection devices Fixed fall protection systems (rope and rail systems, ladder safety devices,…) Manual lifting devices: ratchet and chain hoists, rope hoists, winches Load handling devices: grippers, spreaders, load magnets Load securing: lashing chains, lashing straps Power-operated windows, gates, and doors Hand-held power tools / electrical devices...

... installation in grooves. - Easy attachment through holes in the rail base. Product features to your advantage: - Magnetic core protected and glued in the U-profile. - Profile made of galvanized sheet steel. B15mm H5mm - The screw head is concealed in the rail profile and does not load the magnetic core.

...The transport and positioning unit enables precise positioning of tools and workpieces in deep hole drilling machines. The system has a weight of approximately 20 tons. The grippers allow for the transport of parts weighing up to 7 tons. Despite the large dimensions of the portal, a positioning accuracy of up to 0.1 mm is maintained. Comparable portals in smaller dimensions and with lower load...

... size on the fly. The flexibility lies in the gripper system, where each of the four grippers can be adjusted individually both lengthways and widthways and thus adapt to the actual load size. The Multi FleX1 runs with our patented system, where the top of the machine can be lowered to floor level to ease service and maintenance (EP 2 069 206 B1). ...

...Handling, swivelling and transportation of cupboard, boxes, housings and other loads with the AERO-LIFT box grippers. Two arms with hand slide valves or elektro magnetic valve, electronic warning system with vacuum and power supply check. Big and heavy Sample applications Vacuum box-gripper up to 100kg Vacuum lifting device for boxes and boards. Load bearing capacity 100 kg. Handwheel to swivel...

...Free of copper, silicone, and PTFE, High reliability through T-guides, ATEX and high-temperature versions An efficient and precise load handling system allows the CGPT series grippers to achieve high closing forces with maximum repeat accuracy. The wide range of products offers the suitable solution for various tasks. The grippers are supplied with h8 centering bushings, which, when mounted on the housing and/or gripper fingers, guarantee the highest exchange safety in case of service.

... ball bearings to ensure the stability and rigidity of the gripper and the load during handling. - Handling of barrels, large cartons, coils... - INGENITEC offers its design office for the development of custom grippers - Maximum vertical stroke: 2,000 mm - Manual rotation up to 310° - Ergonomically constant height control handle (INGENITEC patent) - 2-speed control or variable speed lever - Friction torque limiter - Reinforced steel vertical rails - Series load limiter and lifting end stops.

... types of steel drums, plastic ‘L’ ring drums and most fibre drums. The extensive range includes the SC10 for lifting and rotating drums to dispense the contents, scissor grabs, base gripping units and waist grippers, the whole range can also be fitted to pedestrian stackers. Bespoke units can be made to suit customer specification. The latest development is the ‘Quick Release’ fork attachment...

... technology for the metal processing industry, handling devices, handling systems, lifting devices for heavy loads, hoists, engineering offices for handling technology, aluminum crane tracks, load handling devices, manipulators, assembly automation, robot grippers, suction cups for transport devices, etc.

... across all industries. IPR's intelligent and extensive product range, with numerous sizes for various load capacities, ensures more efficient production. Our product spectrum ranges from standard components such as grippers, tool changers, compensating elements, collision protection systems, drive axes for industrial robots, and force-torque sensors to customized solutions. For over 25 years, customers in many countries have trusted us.

GVE is engaged in the construction, repair, and regeneration of grippers and load handling devices for the industry, as well as contract manufacturing for series and individual parts on state-of-the-art machines. Over the years, we have earned a reputation for being competent and reliable, and we work hard to maintain and further improve this reputation. We are certified according to DIN EN ISO 9001 and hold the manufacturer qualification for welding steel structures according to EN 1090-2 up to EXC3.

... (Mobile Industrial Robots) operate independently and safely (load capacity up to 500 kilograms) and cover all common small to medium transport tasks. Interested users can get information anytime at the J+K robot demonstration center, and the company also offers corresponding training on-site or at the customer's location. Standard Parts for Tool and Mold Making In tool making, the use of standard...

...custom load grippers, automatic guided vehicles, modular systems for workstations, flow racks, gravity conveyors, trolleys, and carts suitable for the implementation of LEAN MANUFACTURING principles in any production area.

HandlingProfi stands for ergonomic handling solutions (special grippers, special load handling devices, lifting equipment,...). The ergonomic Hover Crane Balancer features an automatic pneumatic weight detection system. With the Hover Crane Balancer, workplace ergonomics can be improved compared to other lifting devices (chain hoists, rope hoists, winches, hose hoists,...), streamlining work...