formwork accessories

...LOGO.3 Formwork Accessories / Aluminum - Wall Formwork...

...Spacers for formwork. • They are intended for technical and industrial applications where, due to legal requirements, high standards of hygiene, resistance to oxidation, and protection against aggressive materials are necessary. • Other brands should not be used due to the different expansions of the raw material.

...Construction Scaffolding and Formwork Accessories...

...Head for formwork prop: can be fitted on top of formwork props to hold the wood formwork support for which 4 corner angles are welded Tripod stand: the formwork prop can be fixed simply by a bracket that is supported movably on the tripod stand Formwork clamp: large size for stepless fixing by wedge. Eccentric clamp: for tensioning wire from 5 mm - 10 mm, load up to 2.500 kg Formwork clamp: made of 8 mm thick bent flat-bar steel. Wing nut WOF 27, casting, preferred use for grid-pattern formwork etc.

...Casting accessories used in construction scaffolding and formwork...

...Discover our complete range of formwork accessories: - metal spacers with 1 or 2 holes; - formwork stirrups and clamps; - large wedges; - small wedges; - locks and tensioners.

... high quality and at the same time are extremely economical to produce. simple reinforcement fixation prevents floatingup and sinking of light, textile reinforcement precise concrete cover adjustment extreme flexibility for individual settings no sagging of the reinforcement due to initial tension quick filling of concrete, thus saving time and money no further spacers (at the bottom of the formwork) necessary no marking of patterns due to spacers, thus consistently high exposed concrete quality Material:Steel...

... construction site Also optimally usable for wall formwork - more order and safety on the construction site Each frame structure forms a closed static system Can be set up anywhere on load-bearing ground without special foundations, no additional anchoring required With a second beam, also suitable for low parapet elements and for additional tipping safety of high wall elements Quick to assemble and disassemble from just a few frame elements Individual beams also available as stacking rails...

...The construction sector offers a comprehensive range of tools and safety components for the traditional construction site. A wide selection of interior and exterior thread formwork props with corresponding accessories, crank scaffold supports, folding scaffold supports, formwork clamps, work steps, console scaffolding, or safety railing clamps are just a few examples of high-quality products for professional construction.

...Standard - Magnet to prevent lateral displacement of the formwork with corresponding accessories also against floating of the formwork Holding force 350 to 2,000 kp Holding force 350 to 2,000 kp - Standard - Magnet to prevent lateral displacement of the formwork with corresponding accessories also against - floating of the formwork - Holding forces measured on a 10 mm thick, ground...

...In our online shop, you will find all currently available individual items for the PERI TRIO aluminum wall formwork in three different quality levels, as well as a variety of accessories.

...{"Condition":"top quality","Posted on":"08.08.2014","Description":"We offer a Peri Roundflex formwork with accessories in top quality at competitive prices. The formwork is also available in smaller quantities. Price, parts list, and additional images available upon request. If you have any questions, you can send us an email or contact Mr. Deutschenbaur at the mobile number +49 (0) 179-20 40 659.","Price":"upon request / bargain","Product":"Peri Roundflex Formwork"}...

RATEC is a leader in magnetic formwork technology for precast concrete plants. With our innovative solutions, we have set standards and significantly shaped the industry over the past 20 years.

...The frame of the MAXIM panels is made of structural steel or aluminum. Due to the special all-round profile and the associated functional accessories, MAXIM panels are designed for different structures (wall formations, round walls, lift shafts and retaining walls) and allow the realization of a variety of projects. ...

... brackets, column and shear wall forms can be transported together or separately. If Climbing Forms are to be transported together, accessories that connect them to the column and shear wall forms using vertical ties are utilized.

...Frame formwork Varimax by «Variant» Factory Ltd. is a complete system that includes accessories ensuring operation and safety and offering the opportunity to meet any challenges promptly and efficiently. VARIMAX System is suitable to incase: Big-and small-sized walls; Foundations; Columns and pillars. Due to reinforced profiles used for manufacture of Varimax frame formwork panels both...

... some cases, PSK-Top Stacking Tower can work without diagonals, then only 4 elements are enough. •Easy and simple assembly without bolts or pins – without any tools at all. The stacking frame weighs less than 7 kg which facilitates ergonomic and fast assembly. •Due to accessories preparation will not be carried out and the tower can be installed by a single worker, time and labour force are...

...Repair kit for pipelines with all accessories for mounting the sleeve and repairing the pipe. The sleeve fitting is manufactured of solid-woven reinforced fiberglass, made in a unique way, which gives a number of advantages compared to standard fittings: fire resistance, high pressure, corrosion resistance, from 30 years of operation. Scope of fitting application - pipelines, including non...

...We offer a lot of used Peri handset formwork with 85 m². The formwork is in good condition and comes complete with accessories.

...Wooden formwork beam Length 2.90 m or 3.90 m Section 80 x 200 mm Length 2.90 m ref. 001882 Length 3.90 m ref. 001854 Brand: ALTRAD...

...The SC 9015 formwork is compatible with the entire range of SATECO formworks (including circular formworks). Accessories compatible with the SC 9010 formwork. Improved productivity on construction sites: optimized concreting speed, even with self-leveling concrete. Pressure 12 tons/m²: unlimited speed up to 7.5m of wall. Pressure 15 tons/m²: unlimited speed up to 8.9m of wall.

...Wall formwork / Doka Framax Steel approx. 1040 m² in existing condition Outer frame machine cleaned renovated, newly covered or Bauma Riedl formwork new lots of accessories individual parts also possible...

...The company La Nava specializes in hot stamping of iron and steel. It also offers forged steel accessories, formwork accessories, traction joints, and engages in stainless steel and iron and metal stamping activities. The company produces stamped parts for the industrial sector, stamped parts for the automotive sector, for the construction sector, and for the industrial bodywork sector. Upon request, it manufactures custom products or samples with a maximum weight of 10 kilograms. The business is located at via Cascina California 73/75, in Erba (CO).

Metal anchor bolts, formwork, and fastening for civil engineering and construction. Architectural formwork systems of all shapes and sizes. Anchoring techniques, formwork accessories, safety systems, non-standard formwork.

Specializing in the manufacturing of sand castings and machined parts in carbon steel and alloy steel. Scaffolding and formwork accessories, customer-based iron casting (steel, gray iron, ductile iron, etc.). Located in Istanbul, Turkey. Export to all over the world.

...and a specific range for construction), - Commercial Agent for E-Built (formwork accessories and special items for reinforced concrete), - Importer of formwork plywood /MDF/OSB, - Commercial Agent for TELLURE RÔTA, - Sourcing service. Feel free to contact us for more information!

As a company, we have been providing reliable services since 1982. With our professional team, we engage in partnership solutions for construction projects, project resolution, and appropriate product identification. We manufacture tunnel formwork, tunnel formwork accessories, tunnel formwork spare parts, wall concrete formwork, plywood-faced steel formwork, steel column formwork, adjustable column formwork, oval column formwork, and heavy load column formwork.

... formwork, manual formwork, wooden panels - Horizontal formwork: slab formwork tools, shoring towers, props, beams, plywood - Formwork accessories: wedges, spacers, joints, formwork equipment, lifting and prefabrication, chemicals - Construction site equipment: concrete skip, construction site fencing, pedestrian passage, container - Public works equipment: shoring, TP barriers, trench walkway - Safety equipment: peripheral safety for walls and slabs, safety for openings, PPE Discover more about our range at www.jcmat-riviera.com.

Plaka Belgium focuses on fast, reliable, and efficient delivery of a completely revamped product range for residential and commercial construction, the precast concrete industry, infrastructure works, and sound management. The company offers various product groups: concrete cable systems, concrete and masterpieces, reinforcement spacers, formwork and accessories, water-resistant materials, lifting and fastening, support materials, sealing technology, construction chemistry, construction equipment, safety, and acoustics.

...and more. Today, Technique Béton is a company that develops, manufactures, and markets a comprehensive range of products for construction and industry in the following areas: Construction chemistry, Formwork accessories, Lifting and anchoring systems, Reinforcement and expansion systems, enabling it to serve the markets of: Building, Civil Engineering, Ready-Mixed Concrete, Public Works, and Industrial Flooring. Attentive to your needs, Technique Béton is committed to quality management to offer high-performance products and services.