din controller

...Dive into the world of advanced control technology with the µMIC.200 family from MicroControl. This groundbreaking controller goes far beyond the functionality of conventional PLCs. As an IoT gateway, compact controller, and DIN rail PC in one, the µMIC.200 offers a comprehensive solution. Built on the experiences from numerous individual customer projects, where specific requirements and...

... one or multiple hold times, whether cooling or heating phases, you determine the individual process on the device. Type: WGSTAR Phases: 6 Mains Voltage: 230 / 115 / 24 VAC Calibration Accuracy: TE < 0.25 % Type K including built-in comparison measuring point Weight: 380 g Dimensions: 48 x 96 mm (DIN 43700) Installation Depth: 122 mm...

... electrostatically dissipative material ▪ Equipped with a permanently installed capillary tube thermostat (controller / limiter unit) ▪ Usable at low temperatures down to -40°C Note: Please note that before commissioning, the entire system must be inspected and approved by an expert! This item is not an ATEX-certified complete system and is supplied with type test certificates for the electrical components used!

... Version: connection LP/MO pump series; Type H: connection HP/HI/MH pump series; Type R: connection over RS-23 Serial interface (just Type R): RS-232, SUB D male, 9-pole Pump connector (just Type H): 8-pole socket (DIN 45326) Motion Controller (just Type N): integrated 16-Bit Microcontroller Power source: 24 V DC, 3-pole socket Analog interface: 0 – 10 V, 5-pole socket Digital outputs: Open Collector, 24 V, 0.5 A Degree of protection: IP 65 Dimensions (L x W x H): 147 x 141 x 37 mm Weight: approx. 0.7 kg...

...The ecoHarmony EPC 2.0 Lite is an entry level option in the EPC 2.0 family of EVSE controllers. It is the same form-factor DIN rail mounted module designed for IEC 61851 compliant EV charge points, but simplified for certain applications. The 35mm wide module can support 1 charging outlet; either a socket outlet or a tethered cable, and has an option for 6mA DC leakage detection that help...

... on DIN 4754. Design and technical configuration of all temperature controllers are based on the requirements of this norm. Exact film temperature calculation ensures, in combination with flow monitoring, efficient and at the same time reliable operation in all operating conditions. A lockable filter in the circulating medium return line is a standard installation; another installed feature is an expansion vessel with a cold oil container for reliable prevention of damage by oxidation due to oxygen accumulation in the heat carrier. Display:digital Type:circulating oil Use:cooling,heating,process...

As a partner for measurement and automation technology, Dr. Schetter BMC IGmbH supplies components and systems for the entire measurement chain. BMC offers everything from mobile systems to stationary measuring systems with 1000 measuring points, including corresponding software and all components such as measuring cards, sensors, industrial PCs, and all accessories, as well as installation and tr...

... versions. Drive variants: Piston drive made of; - Brass (chrome-plated); - Stainless steel; - Plastic; Stainless steel membrane drive. Versions: - Low-temperature version; - Pressure-relieved version; - Oil, grease, silicone, or PTFE-free versions; … Nominal size: DN 15 - DN 80 Nominal pressure: PN 40, ANSI #150 Materials: Stainless steel 1.4408 Temperature: -100°C to +220°C Connections: Flanges according to DIN EN1092-1; Flanges according to ANSI #150 Accessories: Inductive limit switches Application: Gases, vapors, liquids...

...Kuhnkes FIO Safety PLC is a module intended to expand EtherCAT networks. Acting as the FSoE master, it is able to address any FSoE slave including safety I/Os, motion controllers valve islands and other FSoE equipment. The Safety PLC meets the requirements of IEC 61508 SIL3 and DIN EN ISO 13849 PLe. CODESYS version 3.5SP8 or higher is used for programming. The CODESYS safety function modules have...

...The AE06L is a 1/16 DIN controller designed as an as a over temperature limit protection. The universal input can be easily configured for most thermocouple and signal types, while the 3 alarm outputs can each be setup with different set-points providing multiple limit alarm logic capability to meet most application requirements.

...GM8802S-C is a compact check weigher control module with the DIN rail mount installation method. It has an OLED display. The WEINVIEW 7-inch or 10-inch touch screen is the optional selection. It is suitable for weight checking or sorting in the production process of various industries, such as logistics, chemical, food, pharmaceutical, and electronics industries, and so on.

... μm Accuracy:From ±0.5 % or 1 °C Response time:From 10 ms Power supply communications box:8 bis 32 VDC, 5 W Analog output:4–20 mA, 0–20 mA, 0 – 5 V, 0 – 10 V thermocouple types: J , K, R, S (dependent on model) Digital outputs:USB 2.0, RS485, Profibus DP - V0 Profinet IO, Ethernet TCP/IP, Modbus RTU (dependent on model) Sensor heads per communications box:Up to 8 Operation panel:Some models DIN rail installation:Some models Explosion protection:Intrinsically safe models and power supply available...

... controller Pilot ONE offers a brilliant 5.7" touchscreen with graphic functions and a comfortable navigation menu. All important operating parameters and temperature values are neatly displayed on the... Temperature range:(-20) 28...300 °C Temperature stability:±0,02 °C Temperature control:TAC, self-optimizing (True Adaptive Control) Controller:Pilot ONE (E-grade "Basic") Safety class:III / FL...

... supports a variety of technical features as 2 set point relays, 4 user selectable analog outputs and offers additionally RS232/ RS485 digital interfaces. The bright, sharp and clear OLED display with the integrated keypad user Interface rounds out this user friendly vacuum gauge controller package. The rugged industrial design makes the VGC031 in combination with the convection enhanced PGE050...

...The IRE168DS is clipped onto a DIN rail TS 35. The dimensions of 69x85x62 mm allow for optimal utilization of the control cabinet. The controller is available as a 2-point controller or as a PID controller. Various sensors can be used. The IRE168DS has all the necessary settings for an electric trace heating system with the simplest operation. Additionally, the 2-line display allows for...

...Bi-metal Thermometer Class 1 according to EN 13190 (formerly DIN 16203) Housing: Stainless steel Rear connection From 0 to 200 °C Also available: Protective sleeve made of stainless steel...

... rotating parts • Cost-effectiveness • Latest manufacturing technology • Compliance with all EU directives applicable to the drives • Available for explosion-prone areas • Available for 60Hz networks and other voltage supplies • Optional with temperature switch • Special designs available upon request Accessories • AViTEQ controls (voltage compensation, vibration amplitude controller, diagnostic and maintenance functions)...

...BLDC driver BLD‑20DIN is a device designed to control 3‑phase DC motors with Hall sensors. BLD‑20DIN controls motor speed, acceleration and deceleration, direction. The design of the driver includes internal braking resistor for recuperative energy consumption during deceleration of inertial loads. BLD‑20DIN is designed for DIN rail mounting. BLD‑20DIN has inputs for external signals...

...DC12~24V Power input DC12~24V Power supply with overcurrent Overvoltage and polarity inverse protectionEasy to switch RS232/RS485 RS232/RS485 support automatic data flow control Storage Medium:1 x mSATA bay; 1 x 2.5“ SATA bay BIOS:AMI EFI 64Mbit LAN:4 x Intel GbE LAN controller VGA:Support up to 1920 x 1200@60Hz HDMI:Support up to 3840 x 2160@60Hz Dimensions:(L)200mm x (W)154.5mm x (H)74.6mm Weight:2.4 Kg Mount:Wall-mounted or DIN-Rail Microsoft Windows:Windows 10 IoT Linux:Ubuntu, CentOS, Debian Relative Humidity:5~95% (Non-condensing) EMC:CE/FCC Class A WatchDog:1~255 levels programmable...

...CLASSIC INSTALLATION - SPECIAL INSTALLATION - INSTALLATION OF AC SWITCHES FOR DIN RAIL MOUNTING...

...Individually selected electronic temperature controllers tailored to customer requirements, versatile, reliable, and available in various DIN dimensions. - Customized solutions - Extensive standard range - Precise temperature measurement - Accessories available upon request - Solutions from the fields of measurement and control technology are also possible...

...Density Meter EDM 4000+ with Controller The technical specifications are in accordance or exceed the requirements by the European and American Pharmacopeia and various ASTM, ISO and DIN standards, GLP/GMP, 21 CFR part 11 User-friendly and customizable software. Up to 1000 methods can be programmed and further S + H devices connected. Customs Tariff Item : 9025 8040 HS / EU Country of Origin...

...DIN Rail Mounting 3-digit Display PTC, NTC, PT100, PT-1000 Type J or Type K Thermocouple Input ON/OFF Temperature Control Selectable Heating or Cooling Function Adjustable Temperature Offset Values Adjustable Limits Relay or SSR Control Output Function adjustable for compressor to operate continuously, stop, or operate cyclically in case of a sensor failure Compressor protection through adjustable pause times Password protection for program settings...

... The Series B4 is a 1/8 DIN digital differential pressure controller for positive, negative, and differential pressure as well as velocity and flow. The patented Series B4 Differential Pressure Cotnroller includes (2) 8A SPDT relays, and an optional digitally scaleable 4-20 mA and 0-5 V output. The programmable control allows full configuration of variables such as setpoints, dead band...

...1-/2-channel transmitter Liquiline CM442RCompact multiparameter DIN-rail and cabinet device for all industriesLiquiline CM442R is an easy-to-use, digital multiparameter transmitter for process monitoring and control in all applications - even where mounting space is limited. It saves you time and money through simplified and quick system integration, installation, and handling. The 1-/2-channel controller is extremely compact and fits in every cabinet. Liquiline CM442R provides you with all the benefits of a best-in-class transmitter platform from clever simplicity to maximum process safety.

... • LED indicators for relay status and operation • Electrode supply with alternating current • Supply and measuring voltage galvanically isolated • Safety circuit: In case of failure of the supply voltage or transformer, the filling or emptying process is stopped. Technical Data: Dimensions: L 96 x W 51.5 x H 41.5mm Design: Quick mounting for standard rail DIN EN 50022 Output: 1 changeover contact, working current principle Switching voltage: max. 250V AC Switching current: 6A Duty cycle: 100% Electrode voltage: Mid-position 12V AC max. 25V AC Technical Data Basic Functions Min-Max - 2...

...The GD-02T temperature probe is an accessory for the versatile GSM transmitter and controller GD-02-DIN. It is necessary for using the temperature measurement functions and managing temperature limit values.

...according to DIN 16181 - DIN 16195, straight or in angled form Housing dimensions: 110x30, 150x36, and 200x36 mm Measuring range: from -60 to +600°C Protective tubes according to assembly group 40 Machine thermometer with round housing | Assembly group 51 according to DIN 16167 - DIN 16175, straight or in angled form Measuring range: from -60 to +600°C Protective tubes according to assembly group 40...

... medium:: Neutral gases, air DIN ISO 8573-1 Installation position:: Any, display on top or side Operating pressure:: 1.4 to 7 bar Actuation system:: Single-acting and double-acting Air performance:: QNn = 100 lN/min at 7 bar; ΔT=1bar Protection class:: IP 65/67 according to EN 60529 Protection rating:: 3 according to VDE 0580 Conformity:: EMC 2004/108/EC Position detection module:: Potentiometer max. angle 180° Bus communication:: Profibus DP V1 (optional)...

...Indicate the color of the control here. The standard colors are: - Dark gray indexed control, red signaling push button. - Orange indexed control, dark gray push button. - Red signaling indexed control, dark gray push button. For L ≥ 60 mm, the thread length is 60 mm. On request: Other threads, screw lengths, colors, and special finishes. The dimension "H1" is available in other lengths (specific pricing). Drawing indication: 1) Flat chamfered end DIN 78 Reference: 06611 Finish: Natural stainless steel...