calibration United Kingdom

...The CDH6000 is a gas H2N2 (5% hydrogen) supply that checks the calibration of the H6000. It can be used with one or several calibrated leaks. The CDH6000 must be fitted with a calibrated leak to deliver a known quantity of gas H2 N2 (5% hydrogen) at a given pressure. If the pressure displayed on the gauge of CDH6000 does not exceed 1 bar, change the cartridge (maximum pressure: 4 bar) To purchase...

... independently calibrated with UKAS traceability and this has served to verify our measurement results. LISN's, PLIP's and CDN's are initially supplied calibrated with results documented according to our calibration procedures. Annual re-calibration is also provided on a standard traceability basis. You would receive a bound calibration record for each product submitted with measurement results and details of procedures used. This service is quoted inclusive of return UK carriage cost and is offered on a 5 days turnaround. ...

...Our non-refillable calibration gas canisters are designed specifically for the calibration and bump testing of single and multigas analysers. We offer a wide range of gas mixtures, with the option of multigas mixtures too. Our 34L, 58L, and 110L gas canisters provide the ideal solution for functional testing of gas detection and analytical equipment and being lightweight and compact means they can be easily carried in the workshop or on site. All of the canisters in our range are disposable and can be recycled when empty by using our handy recycling tool.

...ISO/IEC 17025:2017 UKAS accredited calibrations are available across a large range of our traceability schedule for flowmeters, gas flow, air flow, fluid flow for both oil and water flowmeters, pressure, oxygen clean pressure, electrical, frequency, time, temperature simulation and supplemented with a host of standard traceable calibration services. UKAS accredited calibration services...

...Regular and Adhoc Fuel Calibration & Servicing It is recommended to have tanker meters calibrated on a yearly basis to ensure that they continue to give the correct measure. Alpeco is able to offer this service on a ‘when required’ basis, or a tailored yearly service contract is available, which also includes a thorough service to all Alpeco derived equipment on the customer’s installation. Alpeco is then able to seal the equipment for public use. All Alpeco reference meters follow the same stringent guidelines as applied to all Trading Standards instruments to ensure the utmost accuracy.

... to the flow rate. This is particularly important when using calibration gases where repeatability is vital. Note that separate over-pressure safety systems should always be in place to meet health and safety requirements. We can design jackets for most cylinder sizes, with our standard “HHG” being a popular size normally available for immediate delivery. Product Specification: “K” size gas cylinder (others available to order) ATEX IECEx Certified solutions also available For more information contact LMK Thermosafe today T: +44 (0)1440 707141 E: sales@drumheating.com...

... Hard Rexolite Delay line - Easy calibration and measurement settings via CygLink software at the surface - P50 Probe Handler cleverly-designed to self-align with pipes from 50mm diameters to flat surfaces.

... captures high-quality data even with complex shapes - High resolution, sensitivity, and repeatability enable consistent acquisition of accurate data - The sensors can detect a minimum measurement pressure of 10 Pascals - Save time and improve your results through repeatable accuracy and reduced calibration effort - Available in a wide range of size configurations, pressure ranges, and resolutions - Comes standard with the powerful Chameleon visualization software...

...Preparation is key when it comes to SF6 gas analysis. Ensuring the analyser is within calibration is fundamental to safe operation, compliant measurement and accurate testing. Our Verify NIST traceable verification gases can prove the instrument is in specification and valid for use in accordance with ISO9001 requirements for controlled measurement equipment. EMT SF6 gas verification products...

... frequent service and calibration intervals are recommended. Our Calibration Laboratory Engineers perform routine servicing, commissioning, fault finding, repairs and installation services in accordance with our accredited quality system. Our calibration range of -90 °C to +20 °C dewpoint is traceable to National and International Humidity Standards at the National Physical Laborarory (NPL). SHAW products are developed to be reliable, easy to install and simple to operate, We are committed to providing the highest quality products and services for accurate and reliable moisture measurement.

... tester can interchange weight sets between testers of the same range. The base features a dual area screwpress which allows low-pressure priming and high-pressure control. The BGH is a robust design, proven over many years usage. The unit has a 1/16in2 fully hardened and stabilised tool steel piston. This unit gives extremely good sensitivity for high accuracy calibration, yet is tough enough for regular use in a workshop environment.

... is also available on all models. Process Printer: Temperature and time are printed at key stages of the cycle. Pressure and load temperature printing options are also available. Calibration Services: Priorclave is a UKAS accredited calibration laboratory and offers specialist autoclave calibration within the UK. Usually part of a Maintenance Plan, one off calibrations can easily be arranged. Load Sensed Process Timing uses an internal probe placed in the load to give guaranteed sterilisation times. If a printer is fitted load temperature is included on the printed record.

...Class 1 or Class 2 Sound Level Meters. Ideal for basic noise level assessments, emergency service alarm testing, sound system installation and vehicle noise measurement. Complies with IEC 61672-1:2013, IEC 60651:2001, IEC 60804:2000, IEC 61252:1993. Optional add-ons available include: Data Logging, Octave Bands and Audio Note recording. Includes a free calibration certificate and one year...

...S1E now offers a range of tools for professional CIPP lining. Our Services include delivery of pre-impregnated liner across Mainland UK, using a refrigerated vehicle for optimum liner performance on site. We also offer boiler hire, for heat-curing liner once in situ. Supplies include liner, calibration hose and resin. We distribute liner for leading CIPP specialists Brawoliner...

... environments. This crystal is ideal for use where extreme mechanical shock occurs. Calibration Tolerance 2:±100 to ±30ppm Load Capacitance:10pF equency-Temperature Stability 2,3:±50ppm to ±10ppm Industrial:±50ppm to ±20ppm Military:±100ppm to ±30ppm Ageing:±5ppm maximum (first year) Shock, survival:<75,000g, 0.3ms, ½ sinewave Vibration, survival 4:20g, 10~2000Hz swept sinewave Operating Temperature Range:-10°C to +70°C (Commercial) -40°C to +85°C (Industrial) -55° to +125°C (Military) Storage Temperature Range:-55°C to +125°C Maximum Process Temperature:260°C for 20 seconds maximum...

... to make settings on our control units, manage different versions of this data, and safely carry out assembly from the prototype to the larger vehicle fleet. The Enable Tool NG supports the calibration of the control units and the commissioning of electric systems during mass production. The software also maintains databases for the long-term secure storage of data and protocols.

...This is a calibrated pair of a SingleTact sensor and I²C electronics board. It comes with 4 jumper wires and Calibration sheet. We have various combinations of sizes and pressure ranges, please select a sensor that meets your criteria. A handy Help Me Choose page can assist you with the selection. The sensor and electronics are a matched pair, the calibration is stored on the electronics. You can use a tail extender with calibrated systems, but not interchange with other sensors.

... commonly used analyzers in water treatment plants. However, despite their widespread use, these sensors pose several challenges for operators: many traditional sensors struggle to maintain calibration over long periods, have difficulty functioning in harsh solutions, and require significant maintenance. The ORPSense line offers a stable and reliable redox meter that also provides the option for automatic recalibration.

... in turn leads to a more cost-efficient product with less risks and side effects for the patient. Based on comprehensive experience with the production of GMP-compliant pharmaceutical products, all sizes of NETZSCH DeltaVita® machines ranging from small laboratory- to production-size machines excel by the following specific features: •All product wetted parts are designed and manufactured according to the latest GMP standards •Material, production and calibration certificates are supplied together with the machine •Optional cleaning in … ** click to know more **...

...DWL-8500XY is a 2-Axis ultra precision inclinometer with built-in Vibrometer, having resolution and accuracy of 1 arcsec. or 5µm/M and wide measuring range for precision leveling, plane angle measurements, surface 2D profiling & alignment tasks, and capable of real-time wireless Bluetooth/USB remote measuring & data logging. The accuracy performance is verified by accredited calibration & test bodies in Japan & Singapore National Metrology Center, under ILAC & A2LA certifications traceable to NIST, JIS & DIN.

... SYSTEM INSTALLATION SUNDERLAND Professional alarm system installation in Sunderland ensures that sensors, cameras, and alerts are optimally positioned. Certified technicians provide correct configurations and calibration for maximum protection and performance. SECURITY ALARMS SUNDERLAND Security alarms in Sunderland offer protection against various risks, combining features such as burglary, fire...

...1、FAD-GDH system 2、Blood Sample: fresh capillary whole blood, venous whole blood 3、Calibration Sample: venous plasma 4、Test Range: 20-600 mg/dL (1.1-33.3 mmol/L) 5、Test Time: 10s 6、HCT: 30%-60% 7、Memory: 200 test results Expiry Date Of Test Strip: 24 months 9、Test Condition: 10℃ ~ 35℃ 10、Battery Lifetime: above 1000 tests & 100 control solution tests 11、Power: 3.0V(CR2032) button cell...

...Scientific Apparatus & Instruments - Manufacture & calibration of liquid flowmeters for measuring, checking, testing liquid flow rates from 0.05-25 ml/min. Model 5025000 HPLC Liquid flowmeter - sales, calibration & repairs PEAK output simulator - sales, calibration and repairs...

... 9001:2008. We can therefore offer all our products with a generous warranty and a Certificate of Calibration issued from our in-house state of the art Calibration department, guaranteeing reliability and ultimate performance. The extensive range of user friendly dew point meters, on-line hygrometers and dewpoint sampling systems have also been designed to meet the most demanding requirements and needs expressed by the industry. Our in-house capability to design and prototype enables us to manufacture bespoke equipment to customers’ specific requirements and specifications. ...

... Maintenance/Service/overhauls/repairs • Refurbishment & Manufacturing of parts • Safety and Control Valve Testing/Calibration • Free site visits and competitive quotes • Emergency 24 hour Call outs • Distributor First 4 Seals...

... Cleaning Machines & Ventilation Equipment - Pressure & Temperature Calibration Equipment - Water Jetting/Blasting Equipment. - Polypropylene, Nylon Ropes & Wire Ropes, etc. - Pump Spares - Purifier/Separator Spares - Safety Equipment - Stern Tube Seals - Turbo Charger Spares Industrial: - Hydraulic & Pneumatic Tools, Bearings, Couplings - Stainless Steel Pipes, Tubes, Fittingts, Sheets, Hollow Bars - Valves, Gauges, Testing Equipment...

... experience, selling all around the world. Visit our website to view the wide variety of machines we have for sale, or contact us direct to discuss your requirements in detail. We also have a temperature controlled calibration laboratory where we undertake customers calibration work, and for larger machines, this is done onsite. We are also proud to announce our brand new sub contract inspection facility, where we undertake all types of inspection and measurement, with full reporting including. Please call for details. MIDLAND METROLOGY LTD ARE AN ISO9001:2015 ACCREDITED COMPANY ...

... Systems), Sound, Noise, Vibration, Air Quality, Dust, Fit Testing, Asbestos and Heat Stress. Aftersales support includes a manufacturer-approved, in-house Centre for instrument servicing, calibration and repairs, as well as stock of spares and accessories. Ongoing fleet management comes as standard, including service reminders and easy-to-arrange hire extensions. Shawcity is a member of the BOHS, the British Safety Council and the BSIF Registered Safety Supplier Scheme. We are also ISO 9001:2015 and ISO 45001:2018 certified. ...

... available immediately from our vast ex stock range. The company has grown dramatically since its incorporation in 1973, and the group has achieved ISO 9001 registration and boasts an in-house UKAS accredited calibration laboratory. We are a world class company with a wealth of experience amongst our employees and are dedicated to on-going training in all aspects of the business so that we can continue to...

... subjective pattern recognition to a robust, quantitative, and reproducible scientific measurement methodology. With unwavering commitment to excellence, innovation, and collaboration, we are at the forefront of driving advancements in quantitative medical imaging. Our team of experts works tirelessly to ensure that healthcare professionals and researchers worldwide have access to reliable calibration services that elevate the accuracy and reliability of their imaging results. ...