Results for

Can dispensers - Manufacturer Producer - United Kingdom

13 Companies

53 Products

Product recommendations

Poland

Malta

See more products

WATERBOY LTD

United Kingdom

Waterboy are professional spring mineral water suppliers and water cooler rental providers that have developed unrivalled expertise over the last 20 years from studying the science and art or great tasting mineral water. This expertise enables the company to provide very pure, refreshing mineral water, which clients can dispense from the most hygienic water coolers available on the UK market. Bottled water coolers and mains filtered water dispensers are both available for rental. The coolers in Waterboy’s rental fleet are manufactured by Oasis, a world-leading manufacturer. The mineral water comes from a natural spring water source that is fully protected and in existence for over 100 years. It is drawn up from aquifers 250 metres underneath ground level and meets a relevant regulatory and legal requirements This superb quality water is low in sodium, has a PH value that is neutral, its own unique mineral composition and a refreshing taste. Unlike others firms, Waterboy do not clean their coolers on the clients’ premises. Instead, they replace their coolers every three months with a pristine 100% hygienic unit All returned coolers are stripped down and serviced including component inspection and pre-clean. Then each cooler is subjected to a thirty to forty minute cleaning programme using specially designed equipment just for Waterboy use. Waterboy are happy to provide their clients with advice and detailed information about which products are the best suited to

See all products
ASEPHEALTHCARE LTD.

United Kingdom

ASep Healthcare’s is a U.K. based manufacturer of unique single-use and single patient use medical Tourniquets for phlebotomy and prior to Intravenous Cannulation. We can logo and brand our products and boxes with up to 4 colours. Our single-use product is backed by a Clinical papers. We provide a unique dispensing system, which again can be coloured and branded as required. We are looking for distributors worldwide. ASep Healthcare’s award winning innovative single-use disposable tourniquet provides usability, patient comfort and affordability. tournistrip is the only single-use tourniquet, which has been clinically proven. It has been evaluated by ANTT® as a product that helps promote safe aseptic technique and reduce the risk of cross infection very effectively.

All the products for "can dispensers"

Custom Branded Tournistrips

See all products
ST.CLARE ENGINEERING LTD

United Kingdom

Safe & Efficient Drum Handling Do you have a need to load or unload drums from lorries or containers, de-palletise or just generally move drums around a workshop or factory site, the St Clare Engineering range of Grab-O-Matic fork attachment and pedestrian drum handlers will provide a safe and efficient solution for you. The Grab-O-Matic DLR range of rim grip drum handlers are suitable for all types of steel drums, plastic ‘L’ ring drums and most fibre drums. The extensive range includes the SC10 for lifting and rotating drums to dispense the contents, scissor grabs, base gripping units and waist grippers, the whole range can also be fitted to pedestrian stackers. Bespoke units can be made to suit customer specification. The latest development is the ‘Quick Release’ fork attachment drum handler which automatically attach and disengage from the forks and eliminate the need for the truck driver to dismount from his cab to attach or release the units, enhancing safety and saving time! All Grab-O-Matic fork attachments are issued with Test Certificates, CE marked and manufactured entirely in the UK to ISO 9001: 2008. For more information on our extensive range of drum and materials handling equipment please contact Andy Bow on 02380 643402 or email sales@stclare-engineering.co.uk
ALPECO LIMITED

United Kingdom

Alpeco Limited is a global supplier of high-quality liquid handling and flow control equipment across a wide range of industries Alpeco’s stock of liquid handling equipment for tankers, depots and industrial use includes: Engineered pump and meter solutions • Electronic and mechanical PD Flow meters for industrial liquids & petroleum products • Road tanker applications • Tanker Truck loading equipment • Bottom loading arms • Truck Metering equipment • Loading skids • Fuel & Oil pumps • Control Valves • Vapour recovery adaptors • IBC dispensing equipment Alpeco’s experienced engineering solution project team can also design, build and deliver complete bespoke fluid handling solutions customised to your specific requirements.

See all products
ADVANCED LABELLING SYSTEMS LTD

United Kingdom

Advanced Labelling Systems Ltd is a leading UK manufacturer of labelling machines and self-adhesive roll labels. The complete labelling machinery range includes; applicators to apply pre-printed labels, print & apply label applicators that also print variable data and barcodes, industrial thermal transfer printers and an impressive portfolio of Special Purpose Machinery. Typical applications include; - Bottle labelling: Front & back, wrap-around- Can labelling in registration: 3-roller wrap-around- Food trays: C-Wrap, multi-panel, top and base- Syringes: wrap-around- Tamper-evident: top and 1 side "lollipop", top and 2 sides "watchstrap"- Booklet, peel-and-read: multi-layered labels- Security inlets: EAS anti-theft inlets, RFID, NFC and embedded labels We can supply complete lines or integrate with your existing equipment with an equally robust range of conveyors and various product handling options. Semi-automatic label dispensers, Automatic label applicators, Print & Apply Outer case labellers, Industrial barcode label printers and Labelling software. We provide on-site training and assist with service, support and advice using our own Sales & Service Engineers spread across the UK. ALS also manufactures self-adhesive labels, die-cut, printed or plain, on rolls and supply thermal transfer ribbons for barcode printers and print & apply labellers for all makes including: - Avery Dennison, Datamax, ICE / VideoJet, Markem SmartDate, Novexx Solutions, Sato and Zebra.

See all products

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

SAFETY AND HYGIENE LTD

United Kingdom

Safety and Hygiene Ltd are a UK based manufacturer and supplier of Anti-Bacterial disinfecting wipes proven to kill 99.9999% of viruses and bacteria. Our products come in a variety options to meet all requirements including a small 200 sheet tub, a 6 Litre bucket of either 500 or 1000 sheets as well as 200, 700 and 1000 sheet refill packs designed to fit most wall mounted and free standing dispensers as well as the tubs and buckets our products come in. We also supply wall mounted dispenser units to fit our 700 and 1000 refill packs that are stylish and functional. Our Alcohol Free Wipes are certified to EN 1276 (effectiveness against bacteria) and EN 14476 (effectiveness against enveloped viruses) leaving a residual barrier for up to 30 days on hard surfaces. Our alcohol wipe products include Surface Wipes, CPR Manikin Wipes and come in small 200 sheet tubs and 6 Litre buckets of 500 wipes along with refill packs to fit in the small tub or any other small tub cutting down on plastic waste. Manufactured to ISO 9001 standards, our Alcohol Free Wipes condition the surfaces they are applied to rather than corrode them and are non toxic meaning no COSHH data sheet is required for their storage and use. The wipes are recyclable minimising the impact on the environment and refill packs can be purchased to further reduce plastic waste of the tub, simply open and add the refill pack to the tub to restock.

See all products
RICCHE LTD

United Kingdom

.ARE YOU LOOKING FOR A NON-HAZARDOUS SANITISING SOLUTION ? Airvisan is extremely safe, naturally derived, and sustainable. It's eye friendly, skin-friendly and ingestible. Unlike bleach, for example, it does not damage clothing or furniture when fogged. It requires no eye protection, gloves, or PPEs. It is not caustic or corrosive and evaporates rapidly without leaving a residue when fogged. It can be used on cell phones, computer screens and keyboards. Airvisan does not contain any fragrances, however it is a very effective odour neutralizer. Upon dispensing Airvisan has a slight chlorine smell which dissipates almost immediately. We also supply Vectorfog ULV Fogging machines : Fogging is one of the best ways to rid areas of viruses and harmful germs, thereby providing peace of mind for staff and customers. We supply Vectorfog machines, top of the range ULV foggers. They create microscopic nano droplets in a cold fog dispersed in a high-powered air stream. This disperses a fine mist of AirVisan Sanitising Solution over an extensive area which can stay suspended in the air for a few hours, allowing for more effective air sanitation, which is vital for the elimination of airborne viruses. These fine droplets also adhere to surfaces on all sides preventing the pathogens from re-populating. We are small business friendly are ready to provide from small to large quantities of our products to trusted reputable companies

See all products
CLEENOL GROUP LTD

United Kingdom

Cleenol is recognised as one of the UK’s leading innovators, manufacturers and suppliers of quality cleaning and hygiene products. We are known for our top-quality hand sanitisers, British Nova floor care range, Evolution super-concentrated cleaning products and our Own Brand / Private Label cleaning products. We manufacture, warehouse and distribute high-quality products through efficient and personal service. Our focus is on improved product performance, increased safety and environmental credentials and enhanced customer benefit. Cleenol has an extensive manufactured chemical product portfolio, making it a single source for even the most demanding of cleaning requirements. Our products are formulated to industrial strength for the professional market. Cleenol supplies local authorities, government departments and appointed distributors throughout the UK and overseas, together with wholesalers and stockists in a large variety of different marketplaces. We can help you manufacture hygiene and cleaning products with your own custom labels. Cleenol employs its own service support team to give dispenser installation and training services.

See all products
BBK LABELLING & CODING SOLUTIONS LTD

United Kingdom

Our range and labelling systems for the pharmaceutical sector include applications for bottles, vials, ampoules, pots, jars, tubes, dispensers, folding boxes, pens or syringes: Not only can the primary product be labelled and serialised but also the packaging which comes in a variety of formats, is often irregular, and is used in a range of application-specific ways. We know it can often be quite difficult to apply labels to their surfaces, as this must take place under controlled environments, such as clean rooms. We have dedicated project managers who can guide and if needed help compile everything from URS through to validation documents required to qualify the system. Serialization, aggregation, tracking and tracing and tamper-evident sealing are all increasingly important. A range of different technologies for printing, identification, labelling and checking - must be combined and coordinate in a confined area and still provide maximum reliability under the particular production conditions of every pharmaceutical manufacturer. The modular design of our BBK labelling systems make them ideal to cover this wide spectrum of products and applications in the pharmaceutical industry. High-performance printing, camera and control systems ensure that our labelling systems provide maximum reliability - up to and including controlled rejection of products or labels.
THE ONE SHOT CORPORATION LTD

United Kingdom

With the ever-increasing cost of energy, the decreasing availability of capital investment and the world-wide need for the strictest hygiene standards, it is more important than ever to select a concept oﬀering the best value for money and providing premium frozen desserts with total product integrity and hygiene safety. One-Shot is that concept.One-Shot does not use liquid ice cream mix, as used with conventional soft serve machines, One-Shot’s recyclable single portion pods are filled and packed by our licensed ice cream companies (dairies). The product inside the pod is untouched by hand or by any part of the dispenser at any time ensuring that the product maintains total product integrity from the factory to the ultimate customer. Each filled pod will dispense a full 165ml portion of frozen dessert.Most people are fully aware of the high cost of energy and associated problems experienced with conventional soft serve equipment, including the need to strip down, clean and sanitize, lubricate and reassemble on a regular basis. All this can lead to high service costs and spare part replacement, not to mention the liquid ice cream mix remaining in the machine at the end of the day that becomes expensive waste during the cleaning process.With One-Shot no part of the machine comes into contact with the frozen product at any time during the dispensing process, therefore eliminating the need to sanitize inside the One-Shot dispenser.

HUIZHOU SHENGYANG INDUSTRIAL CO., LTD

United Kingdom

Huizhou Shengyang Industrial Co., Ltd. is specialize in R&D and manufacturing electronic equipment industry manufacturing automation equipments.Our products including automatic welding machine, automatic screw locking machine, automatic screw tightening machine, automatic screw feeder machine, Turbine air blowing automatic feeder, Coordinate machine, Automatic dispenser, Peristaltic dispenser, Automatic glue filling machine, Automatic soldering machine, Led production automation line and Electronic automation assembly.We operate with our products with our own brand Techleader for our global customers and we also doing many OEM&ODM production for our customers.Production quality management We strictly follow the standards of double soft enterprise. The company has all kinds of processing equipment, can respond quickly according to customer needs, and guarantee the customer’s pre-sales and after-sales service.Our products are widely used in electronic information, communication industry, auto parts, household appliances, medical equipment, etc. After years of experience, our products have benefited a lot in the industry. We look forward to cooperating with you.Our customers are all over the world, including the United States, South Korea, Malaysia, Russia, Slovenia, Thailand, Philippines, India, Pakistan and other countries.
DONGGUAN DONGRONG SILICONE PRODUCTS CO., LTD.

United Kingdom

Dongguan Dongrong Silicone Products Co., Ltd., founded in 2004, more than 10, 000m³ with independent property rights. It is an OEM and ODM manufacturer of silicone and PVC products that integrates R&D, design, production and sales. Our products are widely used in daily life. Our product ranges are including Household & Mother-Baby Product, Promotional Gifts & Creative Stationery, Consumer Electronics Accessories, Luggage Bags & Garment Accessories, Beauty Care & Outdoor Sport Supplies. We have an experienced development team and mold design and production experience, and can help customers develop and produce molds and products of different specifications, shapes, and precision according to their drawings or needs. At present, the company has been established for nearly 20 years and has developed and produced tens of thousands of molds and products. More than 30 solid silicone extrusion molding machines and automatic dispensing machines have formed multiple silicone molding production lines. The production mode of automated production combined with manual re-inspection is used to complete the molding operation of silicone products, which provides sufficient guarantee of production capacity for customers' orders. DongRong also have passed BSCI，ISO9001, Starbucks, Disney, L'Oreal factory audits and cooperated with well-known brands such as Starbucks, Disney, L'Oreal, etc., for several years. All products are certified by CE, ROHS, REACH, FDA, LFGB, etc.

Product recommendations

Malta

Medizer Mouds Series Meltblown Tropical Flamingo Patterned Medical Mask

Turkey

France

Germany

See more products

GREATWHIP

United Kingdom

As one of the biggest cream charger suppliers from China, GreatWhip has over 10 years of experience in the cream charger business. With state-of-the-art and fully automatic machines, we can produce over 40 million pieces per month. We offer a full range of flavors including mint, strawberry, blueberry, watermelon, banana, grape, and so on. We also provide 580 g cream chargers and cream dispensers. GreatWhip Cream Chargers are filled with the purest, highest quality Nitrous Oxide (N2O) gas available. Our products are made of the highest quality materials and are engineered to the highest international standard; Achieving no oil, no residual, and fresh smelling with super clean technology. To fulfill global demand, we have warehouses in Los Angles/US, New Jersey/US, Miami/US, Sydney/Australia, Belgium/Europe, and London/UK. It normally takes 2-3 working days to deliver products in these areas. Also, we are looking for partners/distributors globally. GreatWhip Cream Charger UK: https: //greatwhip.uk/ GreatWhip Cream Charger US: https: //grtsupply.com/ GreatWhip Cream Charger AU: https: //greatwhip.com.au/

Find quotes for

Filters

Results for

Can dispensers - Manufacturer Producer - United Kingdom

Number of results

13 Companies