...
Our "SPIDER" wire weaving machine produces high-speed, low-cost spiral wire mesh systems with a pneumaticsystem and separate moving parts.
The compressor necessary for the operation of the pneumaticsystem is included in the system.
Thanks to the 4" PLC touchscreen, the weaving speed, the height of the fence to be woven, the width of the fence, and other data can be adjusted by the operator.
It has a fully automatic operating system.
...)
- Automatic stop when doors are opened
- Box magazine compartment (100 box capacity)
- Manual box size adjustment
- Easily accessible Emergency Stop buttons
- Easy and quick size adjustment changes
- Pneumaticsystem that does not require lubrication (FESTO)
- Side belt dragging, dual motor box transport (SEW)
- TBD-50 strapping dispenser (Max. 50mm strap width)
- Bottom box strapping (TBD-50)
- Compatible with all types of boxes and strapping according to international standards
- European standard Strapping Dispenser and Box Transport System
- Minimum maintenance requirements
- CE certified...
... heating. The unit has an inlet hopper where the product is directed to the brittle bar line machine. The mixed product is then directed to a series of rollers, where the user can adjust the cutting height. The shaping and forming rollers are controlled and subsequently synchronized with motors. The size of the brittle bars can vary according to user needs, and the blades are designed to cut accordingly. A horizontal pneumatic sharpened cutter is used for cutting the brittles at regular intervals from a specific system.
...all line is made of food-grade materials - the machines gained ISO and CE certificates - 0ne year warranty- it works by gas or diesel - it is fully automatic. - it works by the pneumaticsystem - the oven works by the infrared system and it withstands high temperatures.
ability to fit big and medium places. our engineers are ready to plan your place.
...m2,47
Height with front side, m3,2
The height of the front side from the floor inside, m1,5
Center distance between axles, m1,31
Number of conics, pcs6
Height of removable conics, m0,8
Number of rails6
Rail height, mm80
End loops, qty4
Suspension
Pneumatic (the system uniformly suppresses swinging)
Brake system
Braking system (EBS) Wabco (also have an outer button for lifting the front...
...-reel feeding, -slitting and winding, -end cutting and sealing, -shaft removal
4. Winding Control: The automatic pneumatic proportional valve controls the lifting of the linear sliding rail. The pneumatic servo system controls the driving of the roll, and pneumatic hooks grip the core shaft.
...You can have a healthy diet by grinding traditional and cultural whole wheat flour with the stone mill machine system.
You can obtain quality flour by using completely new generation machines in the stone mill wheat milling system.
Machines such as pneumaticsystem sieve filter blower used in the stone mill wheat milling system are used. In this way, the flour quality has been increased.
The...
...What is an Air Pneumatic Strapping Machine?
The Air Strapping Machine PNF19 is an easy-to-use, practical pallet strapping system that boasts high-speed potential and superior performance even in the toughest conditions, such as stone, tile, concrete, brick, and pumice.
With a tensioning force of 3500 N and requiring an air pressure of 5-8 bar, this high-quality, robust, reliable, fast, and...
... paverstones can be produced 36 units in one press. Machine is able to produce the insulated block upon demand.
Thanks to special features developed by our engineers machine have very short cycle time. For example mould changing is wery easy and take short tme in new system.
Automation system and operator panel which is developed and redesigned in long years become user friendly and useful.
With our special design vibration table you can produce high quality products with less energy.
We use pneumatic bellows in machine mould connections.
... the machine with fixed hangers, standard Ø27 * 18/80 IU, DIN 11851 gland connection nozzles, the packages are transported in multiple, carrier plates which can be changed according to the package. The machine with T = 203.2 mm stepping 1, 2 transmission chain conveyor can work in packages with diameters between 60 mm and 140 mm. In the machine, empty package feeding and lid feeding on full bucket is done automatically. After the cover feeding station, there is a cover control unit and a multi-row pneumatic cover fastening unit.
... blocks making machine has also the operative and quick mold changing system. It makes the machine ideal for producing different kinds of blocks.
General Options
Easy to install
Easy commissioning and repair
Pneumatic and hydraulic cylinders
Efficient operation with high productivity
Low investment and operating costs
Easy to clean
Opportunity for long-term work
System simplicity
Reliable emergency system...
...Have a level control that ensures that the test medium is topped up automatically
It has overtemperature shutdown separate control circuit
The special circulation system guarantees high accuracy and uniform temperature distribution.
The double insulation of the bath walls
Special seals keep steam in the test bath
Pneumatic operated doors
Quickrelease couplings connections inside the bath
Highquality stainless steel SS304
Option to connect a chiller for 20C tests
Easy connection to pressure test units
...
...Limited energy consumption and minimum overall dimensions.
-Heating system with thermoregulated oven. The pipe is heated evenly both inside and out.
-Finger resistance double oven heating system.
-Pneumatic Jaw System
-Water cooling system.
- High belling capasity.
-Integration into the extrusion line...
... system can be used, depending on the needs.
Thanks to special pneumatic lid locks on the mixer’s top covers, complete isolation is ensured, preventing any leakage during the mixing process.
RPMmach has developed certain features aimed at homogenization and short-term mixing in Sigma silicone mixers. The special design of Sigma rotors allows them to be positioned as close to each other as possible.
For detailed information and pricing, please contact our company.
Visit: https://www.youtube.com/watch?v=Ul1gwEcbY8I...
... supporting and transporting the hose away from the cutter bushing at adjustable speeds typically more than line speed, eliminating accumulation and sorting confusion. The hose can then be optionally ejected by a pneumatic ejector system into a collection tray for operator removal or for coiling by a winding machine. The driven conveyor automatically discharges parts to a collection tray for this purpose. Our conveyors can be optionally configured for one side or dual side collection which is for double extrusion of the hose on the same extrusion line.
...Purpose of Use: Medical Gas Outlets are designed to transfer pressurized gas from the central medical gas system to the patient.
Usage of Medical Gas Outlets: Gas outlets are installed in bedside units, intensive care units, wall modules, etc. Medical Gas Outlets are connected to the central system. The medical device to be used is connected to the medical gas outlet for operation.
Technical Specifications: Gas outlets lock the used jack through a check-valve system and initiate gas flow. Gas Outlets consist of two parts: a main body and a base made of copper pipe welding or a pneumatic outlet base.
...The vertical jaws mounted on the machine for making vertical adhesives allow for quadrilateral adhesion by mounting pneumatic, electrical, and other components onto the collar group. After the initial setup, it is a complete Quadro Collar set system that does not require readjustment during collar changes.
...SNKW-P2 General Features:
The SNKW-P2 Ultrasonic Welding Machine is a system designed for small to medium-sized industrial applications, consisting of an ultrasonic power supply and a pneumatic structure. It may be preferred for welding larger scale products compared to the SNKW-P1. The distance between the horn and the table is longer, and the adjustment range is greater. Its ease of use and compatibility with automation systems provide very quick solutions in industrial applications.
...Welding process for each corner of PVC profiles at the same time.
Ability to weld white and colored profiles.
Ability to weld at 2x90 degree angle in one operation.
Allows 90 degree welding in moving corner.
Fully automatic heat control system.
More safety in the welding process through welding pressure and profile pressure adjustment.
Pneumatic braking/stabilization feature on the right corner...
...Use 18 Bar Dry Air systems for Laser Cutting machines. Eliminate your cutting gas costs.
High costs are often incurred for quality cutting in laser machines. With the 18 Bar Dry Air system, you can avoid tube and transportation expenses.
You can put an end to your tube purchasing costs with the 18 Bar Dry Air system.
With the Oil-Free Pneumatic Booster, you can guarantee oil-free and dry cutting air. Thanks to the Active Carbon Towers and Chemical Dryers used in the system, continuous measurements ensure a flow of dry and oil-free air.
...Bobbin Diameter: 1100mm, Bobbin Width: Max 600 mm, Log Diameter: 76,2mm
7,5 kw dry vacuum, Max. capacity: 300 m/min (1500 Sheet : 2 lines)
Final Product Dimensions (Folded and opened) are optional according to the customer need
This machine contains a pneumatic loading system to load the bobbins.
Micro Emboss unit: Side or full are optional depends on customer choices.
... attributes include ease of use, high performance, long lifespan, and powerful, fast operation. Our machine is designed with aesthetics and user-friendliness in mind, making its design and quality superior to other brands. For instance, the movement of the supports for faster operation of the crank grinding machine is pneumatic, allowing for very easy movement of the supports. Locking the mirrors is very practical. The hydraulic installation and pneumaticsystem are mounted on the machine.
...ALL IN ONE MACHINE.
MAKES A MINIMUM OF 40 PRODUCTS IN A MINUTE WITH ITS TURNTABLE SYSTEM.
YOU CAN PRODUCE PRODUCTS SUCH AS MEDICINE TUBES, COVID-19 TEST TUBES, BLOOD TEST TUBES ON OUR MACHINE.
OUR MACHINE IS COMPLETELY MADE OF STAINLESS AND CORROSION RESISTANT MATERIALS SUITABLE FOR THE HEALTH SECTOR.
IT HAS FULLY ELECTRIC MOVEMENT MECHANISMS. PNEUMATIC IS NOT USED IN OUR MACHINE.
...Sterilmed Steam Sterilizer / Autoclave
Sterilmed Steam Sterilizer Models are designed and manufactured for fast and efficient sterilization of heat & moisture resistant materials such as textile materials, surgical instruments, dressing tools, rubber materials, and liquids in a glass container with pre-vacuum configuration. Sterilmed Steam Sterilizers feature a horizontal loading system aimed at providing the best service in healthcare institutions, with both single-door and double-door automatic pneumatic door system options that open to sterile/non-sterile areas.
...The machine enables the 45-degree cutting of PVC profile strips and the removal of the notch area. It features a fully electro-pneumaticsystem. The operating system is automatic, and the horizontal feed speed can be adjusted. It performs serial and precise cuts.
- Performs 45-degree cuts (notched and error-free)
- Fully electro-pneumaticsystem
- Fully automatic
- Adjustable horizontal feed...
...The resistance length is 80 cm.
*The piston length is 200 cm.
*The working principle is pneumatic and operates under air pressure.
*The electrical circuit is 380 volts and is a mechanical system.
*It will be manufactured entirely from 304 quality stainless steel.
*The conveyor system and lifting platform belong to the purchasing company.
*It can package between 250 kg and 1000 kg.
...Practical and easy manual lifting
Solid machine body
Wider cutting range than other manufacturers
90° left cut
Miter movement
Cutting at intermediate degrees
World-class components
Cutting at standard angles and all intermediate angles
Straight split cut to the left at 90°
Motor power: 2.2 kW, 3HP, 400V-230V, 50/60 Hz
Saw sizes: D = 450 mm, d = 30-32 mm
Saw speed: 3000 rpm
Dimensions: 80x94x138 cm
Total weight: 160 kg
1 pc. 450 mm saw blade
2 pieces vertical clamps
Conveyor
Pneumatic clamps
Spray lubrication system
Three-phase motor...
...FEATURES
Loading Ramp: Hydraulic, pneumatic operated, or spring system
Platform: Pool type, flat type, from loading
Axles: BPW or BPW type Turkish brand axles with 9-12-14-16 tons capacity, drum or disc option
Steering: Self-steering, Hydraulic steering option
Brakes: Wabco EBS or Wabco ABS brake system
Suspension: Air suspension, hydraulic, mechanical leaf spring suspension, or...